Continuous function

Template:Short description {{#invoke:sidebar|collapsible | class = plainlist | titlestyle = padding-bottom:0.25em; | pretitle = Part of a series of articles about | title = Calculus | image = $\underset{a}{\overset{b}{\int }}{f}^{\prime }(t)dt=f(b)-f(a)$ | listtitlestyle = text-align:center; | liststyle = border-top:1px solid #aaa;padding-top:0.15em;border-bottom:1px solid #aaa; | expanded = | abovestyle = padding:0.15em 0.25em 0.3em;font-weight:normal; | above =

• Fundamental theorem

• Limits
• Continuity

• Rolle's theorem
• Mean value theorem
• Inverse function theorem

| list2name = differential | list2titlestyle = display:block;margin-top:0.65em; | list2title = Template:Bigger | list2 ={{#invoke:sidebar|sidebar|child=yes

 |contentclass=hlist
 | heading1 = Definitions
 | content1 =

• Derivative (generalizations)
• Differential
  • infinitesimal
  • of a function
  • total

 | heading2 = Concepts
 | content2 =

• Differentiation notation
• Second derivative
• Implicit differentiation
• Logarithmic differentiation
• Related rates
• Taylor's theorem

 | heading3 = Rules and identities
 | content3 =

• Sum
• Product
• Chain
• Power
• Quotient
• L'Hôpital's rule
• Inverse
• General Leibniz
• Faà di Bruno's formula
• Reynolds

}}

| list3name = integral | list3title = Template:Bigger | list3 ={{#invoke:sidebar|sidebar|child=yes

 |contentclass=hlist
 | content1 =

• Lists of integrals
• Integral transform
• Leibniz integral rule

| heading2 = Definitions

 | content2 =

• Antiderivative
• Integral (improper)
• Riemann integral
• Lebesgue integration
• Contour integration
• Integral of inverse functions

 | heading3 = Integration by
 | content3 =

• Parts
• Discs
• Cylindrical shells
• Substitution (trigonometric, tangent half-angle, Euler)
• Euler's formula
• Partial fractions (Heaviside's method)
• Changing order
• Reduction formulae
• Differentiating under the integral sign
• Risch algorithm

}}

| list4name = series | list4title = Template:Bigger | list4 ={{#invoke:sidebar|sidebar|child=yes

 |contentclass=hlist
 | content1 =

• Geometric (arithmetico-geometric)
• Harmonic
• Alternating
• Power
• Binomial
• Taylor

 | heading2 = Convergence tests
 | content2 =

• Summand limit (term test)
• Ratio
• Root
• Integral
• Direct comparison
• 
  Limit comparison
• Alternating series
• Cauchy condensation
• Dirichlet
• Abel

}}

| list5name = vector | list5title = Template:Bigger | list5 ={{#invoke:sidebar|sidebar|child=yes

 |contentclass=hlist
 | content1 =

• Gradient
• Divergence
• Curl
• Laplacian
• Directional derivative
• Identities

 | heading2 = Theorems
 | content2 =

• Gradient
• Green's
• Stokes'
• Divergence
• generalized Stokes
• Helmholtz decomposition

}}

| list6name = multivariable | list6title = Template:Bigger | list6 ={{#invoke:sidebar|sidebar|child=yes

 |contentclass=hlist
 | heading1 = Formalisms
 | content1 =

• Matrix
• Tensor
• Exterior
• Geometric

 | heading2 = Definitions
 | content2 =

• Partial derivative
• Multiple integral
• Line integral
• Surface integral
• Volume integral
• Jacobian
• Hessian

}}

| list7name = advanced | list7title = Template:Bigger | list7 ={{#invoke:sidebar|sidebar|child=yes

 |contentclass=hlist
 | content1 =

• Calculus on Euclidean space
• Generalized functions
• Limit of distributions

}}

| list8name = specialized | list8title = Template:Bigger | list8 =

• Fractional
• Malliavin
• Stochastic
• Variations

| list9name = miscellanea | list9title = Template:Bigger | list9 =

• Precalculus
• History
• Glossary
• List of topics
• Integration Bee
• Mathematical analysis
• Nonstandard analysis

}}

In mathematics, a continuous function is a function such that a small variation of the argument induces a small variation of the value of the function. This implies there are no abrupt changes in value, known as discontinuities. More precisely, a function is continuous if arbitrarily small changes in its value can be assured by restricting to sufficiently small changes of its argument. A discontinuous function is a function that is Template:Em. Until the 19th century, mathematicians largely relied on intuitive notions of continuity and considered only continuous functions. The epsilon–delta definition of a limit was introduced to formalize the definition of continuity.

Continuity is one of the core concepts of calculus and mathematical analysis, where arguments and values of functions are real and complex numbers. The concept has been generalized to functions between metric spaces and between topological spaces. The latter are the most general continuous functions, and their definition is the basis of topology.

A stronger form of continuity is uniform continuity. In order theory, especially in domain theory, a related concept of continuity is Scott continuity.

As an example, the function Template:Math denoting the height of a growing flower at time Template:Mvar would be considered continuous. In contrast, the function Template:Math denoting the amount of money in a bank account at time Template:Mvar would be considered discontinuous since it "jumps" at each point in time when money is deposited or withdrawn.

History

A form of the epsilon–delta definition of continuity was first given by Bernard Bolzano in 1817. Augustin-Louis Cauchy defined continuity of $y=f(x)$ as follows: an infinitely small increment $\alpha$ of the independent variable x always produces an infinitely small change $f(x+\alpha )-f(x)$ of the dependent variable y (see e.g. Cours d'Analyse, p. 34). Cauchy defined infinitely small quantities in terms of variable quantities, and his definition of continuity closely parallels the infinitesimal definition used today (see microcontinuity). The formal definition and the distinction between pointwise continuity and uniform continuity were first given by Bolzano in the 1830s, but the work wasn't published until the 1930s. Like Bolzano, Karl Weierstrass denied continuity of a function at a point c unless it was defined at and on both sides of c, but Édouard Goursat allowed the function to be defined only at and on one side of c, and Camille Jordan allowed it even if the function was defined only at c. All three of those nonequivalent definitions of pointwise continuity are still in use. Eduard Heine provided the first published definition of uniform continuity in 1872, but based these ideas on lectures given by Peter Gustav Lejeune Dirichlet in 1854.

Real functions

Definition

The function $f(x)=\frac{1}{x}$ is continuous on its domain ($ℝ\setminus \{0\}$), but is discontinuous at $x=0,$ when considered as a partial function defined on the reals.

A real function that is a function from real numbers to real numbers can be represented by a graph in the Cartesian plane; such a function is continuous if, roughly speaking, the graph is a single unbroken curve whose domain is the entire real line. A more mathematically rigorous definition is given below.

Continuity of real functions is usually defined in terms of limits. A function Template:Math with variable Template:Mvar is continuous at the real number Template:Mvar, if the limit of $f(x),$ as Template:Mvar tends to Template:Mvar, is equal to $f(c).$

There are several different definitions of the (global) continuity of a function, which depend on the nature of its domain.

A function is continuous on an open interval if the interval is contained in the function's domain and the function is continuous at every interval point. A function that is continuous on the interval $(-\mathrm{\infty },+\mathrm{\infty })$ (the whole real line) is often called simply a continuous function; one also says that such a function is continuous everywhere. For example, all polynomial functions are continuous everywhere.

A function is continuous on a semi-open or a closed interval; if the interval is contained in the domain of the function, the function is continuous at every interior point of the interval, and the value of the function at each endpoint that belongs to the interval is the limit of the values of the function when the variable tends to the endpoint from the interior of the interval. For example, the function $f(x)=\sqrt{x}$ is continuous on its whole domain, which is the closed interval $[0,+\mathrm{\infty }).$

Many commonly encountered functions are partial functions that have a domain formed by all real numbers, except some isolated points. Examples include the reciprocal function $x\mapsto \frac{1}{x}$ and the tangent function $x\mapsto \tan x.$ When they are continuous on their domain, one says, in some contexts, that they are continuous, although they are not continuous everywhere. In other contexts, mainly when one is interested in their behavior near the exceptional points, one says they are discontinuous.

A partial function is discontinuous at a point if the point belongs to the topological closure of its domain, and either the point does not belong to the domain of the function or the function is not continuous at the point. For example, the functions $x\mapsto \frac{1}{x}$ and $x\mapsto \sin (\frac{1}{x})$ are discontinuous at Template:Math, and remain discontinuous whichever value is chosen for defining them at Template:Math. A point where a function is discontinuous is called a discontinuity.

Using mathematical notation, several ways exist to define continuous functions in the three senses mentioned above.

Let $$f:D\to ℝ$$ be a function defined on a subset $D$ of the set $ℝ$ of real numbers.

This subset $D$ is the domain of Template:Math. Some possible choices include

• $D=ℝ$: i.e., $D$ is the whole set of real numbers. or, for Template:Mvar and Template:Mvar real numbers,
• $D=[a,b]=\{x\in ℝ\mid a\le x\le b\}$: $D$ is a closed interval, or
• $D=(a,b)=\{x\in ℝ\mid a<x<b\}$: $D$ is an open interval.

In the case of the domain $D$ being defined as an open interval, $a$ and $b$ do not belong to $D$, and the values of $f(a)$ and $f(b)$ do not matter for continuity on $D$.

Definition in terms of limits of functions

The function Template:Math is continuous at some point Template:Math of its domain if the limit of $f(x),$ as x approaches c through the domain of f, exists and is equal to $f(c).$ In mathematical notation, this is written as $$\underset{x\to c}{\lim }f(x)=f(c).$$ In detail this means three conditions: first, Template:Math has to be defined at Template:Math (guaranteed by the requirement that Template:Math is in the domain of Template:Math). Second, the limit of that equation has to exist. Third, the value of this limit must equal $f(c).$

(Here, we have assumed that the domain of f does not have any isolated points.)

Definition in terms of neighborhoods

A neighborhood of a point c is a set that contains, at least, all points within some fixed distance of c. Intuitively, a function is continuous at a point c if the range of f over the neighborhood of c shrinks to a single point $f(c)$ as the width of the neighborhood around c shrinks to zero. More precisely, a function f is continuous at a point c of its domain if, for any neighborhood $N_1(f(c))$ there is a neighborhood $N_2(c)$ in its domain such that $f(x)\in N_1(f(c))$ whenever $x\in N_2(c).$

As neighborhoods are defined in any topological space, this definition of a continuous function applies not only for real functions but also when the domain and the codomain are topological spaces and is thus the most general definition. It follows that a function is automatically continuous at every isolated point of its domain. For example, every real-valued function on the integers is continuous.

Definition in terms of limits of sequences

The sequence Template:Math converges to Template:Math

One can instead require that for any sequence $(x_n{)}_{n\in \mathbb{N}}$ of points in the domain which converges to c, the corresponding sequence ${(f(x_n))}_{n\in \mathbb{N}}$ converges to $f(c).$ In mathematical notation, $$\mathrm{\forall }(x_n{)}_{n\in \mathbb{N}}\subset D:\underset{n\to \mathrm{\infty }}{\lim }{x}_n=c\Rightarrow \underset{n\to \mathrm{\infty }}{\lim }f(x_n)=f(c).$$

Weierstrass and Jordan definitions (epsilon–delta) of continuous functions

Illustration of the Template:Mvar-Template:Mvar-definition: at Template:Math, any value Template:Math satisfies the condition of the definition for Template:Math.

Explicitly including the definition of the limit of a function, we obtain a self-contained definition: Given a function $f:D\to ℝ$ as above and an element $x_0$ of the domain $D$, $f$ is said to be continuous at the point $x_0$ when the following holds: For any positive real number $\epsilon >0,$ however small, there exists some positive real number $\delta >0$ such that for all $x$ in the domain of $f$ with $x_0-\delta <x<x_0+\delta ,$ the value of $f(x)$ satisfies $$f\left(x_0\right)-\epsilon <f(x)<f(x_0)+\epsilon .$$

Alternatively written, continuity of $f:D\to ℝ$ at $x_0\in D$ means that for every $\epsilon >0,$ there exists a $\delta >0$ such that for all $x\in D$: $$|x-x_0|<\delta \text{ implies }|f(x)-f(x_0)|<\epsilon .$$

More intuitively, we can say that if we want to get all the $f(x)$ values to stay in some small neighborhood around $f\left(x_0\right),$ we need to choose a small enough neighborhood for the $x$ values around $x_0.$ If we can do that no matter how small the $f(x_0)$ neighborhood is, then $f$ is continuous at $x_0.$

In modern terms, this is generalized by the definition of continuity of a function with respect to a basis for the topology, here the metric topology.

Weierstrass had required that the interval $x_0-\delta <x<x_0+\delta$ be entirely within the domain $D$, but Jordan removed that restriction.

Definition in terms of control of the remainder

In proofs and numerical analysis, we often need to know how fast limits are converging, or in other words, control of the remainder. We can formalize this to a definition of continuity. A function $C:[0,\mathrm{\infty })\to [0,\mathrm{\infty }]$ is called a control function if

• C is non-decreasing
• $\underset{\delta >0}{\inf }C(\delta )=0$

A function $f:D\to R$ is C-continuous at $x_0$ if there exists such a neighbourhood $N(x_0)$ that $$|f(x)-f(x_0)|\le C\left(|x-x_0|\right)\text{ for all }x\in D\cap N(x_0)$$

A function is continuous in $x_0$ if it is C-continuous for some control function C.

This approach leads naturally to refining the notion of continuity by restricting the set of admissible control functions. For a given set of control functions $𝒞$ a function is Template:Nowrap if it is Template:Nowrap for some $C\in 𝒞.$ For example, the Lipschitz and Hölder continuous functions of exponent Template:Mvar below are defined by the set of control functions $${𝒞}_{\mathrm{L}\mathrm{i}\mathrm{p}\mathrm{s}\mathrm{c}\mathrm{h}\mathrm{i}\mathrm{t}\mathrm{z}}=\{C:C(\delta )=K|\delta |,K>0\}$$ respectively $${𝒞}_{\text{Hölder}-\alpha }=\{C:C(\delta )=K|\delta {|}^{\alpha },K>0\}.$$

Definition using oscillation

The failure of a function to be continuous at a point is quantified by its oscillation.

Continuity can also be defined in terms of oscillation: a function f is continuous at a point $x_0$ if and only if its oscillation at that point is zero; in symbols, ${\omega }_f(x_0)=0.$ A benefit of this definition is that it Template:Em discontinuity: the oscillation gives how Template:Em the function is discontinuous at a point.

This definition is helpful in descriptive set theory to study the set of discontinuities and continuous points – the continuous points are the intersection of the sets where the oscillation is less than $\epsilon$ (hence a $G_{\delta }$ set) – and gives a rapid proof of one direction of the Lebesgue integrability condition.

The oscillation is equivalent to the $\epsilon -\delta$ definition by a simple re-arrangement and by using a limit (lim sup, lim inf) to define oscillation: if (at a given point) for a given ${\epsilon }_0$ there is no $\delta$ that satisfies the $\epsilon -\delta$ definition, then the oscillation is at least ${\epsilon }_0,$ and conversely if for every $\epsilon$ there is a desired $\delta ,$ the oscillation is 0. The oscillation definition can be naturally generalized to maps from a topological space to a metric space.

Definition using the hyperreals

Cauchy defined the continuity of a function in the following intuitive terms: an infinitesimal change in the independent variable corresponds to an infinitesimal change of the dependent variable (see Cours d'analyse, page 34). Non-standard analysis is a way of making this mathematically rigorous. The real line is augmented by adding infinite and infinitesimal numbers to form the hyperreal numbers. In nonstandard analysis, continuity can be defined as follows.

(see microcontinuity). In other words, an infinitesimal increment of the independent variable always produces an infinitesimal change of the dependent variable, giving a modern expression to Augustin-Louis Cauchy's definition of continuity.

Construction of continuous functions

The graph of a cubic function has no jumps or holes. The function is continuous.

Checking the continuity of a given function can be simplified by checking one of the above defining properties for the building blocks of the given function. It is straightforward to show that the sum of two functions, continuous on some domain, is also continuous on this domain. Given $$f,g:D\to ℝ,$$ then the Template:Em $$s=f+g$$ (defined by $s(x)=f(x)+g(x)$ for all $x\in D$) is continuous in $D.$

The same holds for the Template:Em, $$p=f\cdot g$$ (defined by $p(x)=f(x)\cdot g(x)$ for all $x\in D$) is continuous in $D.$

Combining the above preservations of continuity and the continuity of constant functions and of the identity function $I(x)=x$ Template:Nowrap one arrives at the continuity of all polynomial functions Template:Nowrap such as $$f(x)=x^3+x^2-5x+3$$ (pictured on the right).

The graph of a continuous rational function. The function is not defined for $x=-2.$ The vertical and horizontal lines are asymptotes.

In the same way, it can be shown that the Template:Em $$r=1/f$$ (defined by $r(x)=1/f(x)$ for all $x\in D$ such that $f(x)\ne 0$) is continuous in $D\setminus \{x:f(x)=0\}.$

This implies that, excluding the roots of $g,$ the Template:Em $$q=f/g$$ (defined by $q(x)=f(x)/g(x)$ for all $x\in D$, such that $g(x)\ne 0$) is also continuous on $D\setminus \{x:g(x)=0\}$.

For example, the function (pictured) $$y(x)=\frac{2x-1}{x+2}$$ is defined for all real numbers $x\ne -2$ and is continuous at every such point. Thus, it is a continuous function. The question of continuity at $x=-2$ does not arise since $x=-2$ is not in the domain of $y.$ There is no continuous function $F:ℝ\to ℝ$ that agrees with $y(x)$ for all $x\ne -2.$

The sinc and the cos functions

Since the function sine is continuous on all reals, the sinc function $G(x)=\sin (x)/x,$ is defined and continuous for all real $x\ne 0.$ However, unlike the previous example, G Template:Em be extended to a continuous function on Template:Em real numbers, by Template:Em the value $G(0)$ to be 1, which is the limit of $G(x),$ when x approaches 0, i.e., $$G(0)=\underset{x\to 0}{\lim }\frac{\sin x}{x}=1.$$

Thus, by setting

$G(x)=\{\begin{array}{cc}\frac{\sin (x)}{x}& \text{ if }x\ne 0\\ 1& \text{ if }x=0,\end{array}$

the sinc-function becomes a continuous function on all real numbers. The term Template:Em is used in such cases when (re)defining values of a function to coincide with the appropriate limits make a function continuous at specific points.

A more involved construction of continuous functions is the function composition. Given two continuous functions $$g:D_g\subseteq ℝ\to R_g\subseteq ℝ\text{ and }f:D_f\subseteq ℝ\to R_f\subseteq D_g,$$ their composition, denoted as $c=g\circ f:D_f\to ℝ,$ and defined by $c(x)=g(f(x)),$ is continuous.

This construction allows stating, for example, that $$e^{\sin (\ln x)}$$ is continuous for all $x>0.$

Examples of discontinuous functions

Plot of the signum function. It shows that $\underset{n\to \mathrm{\infty }}{\lim }\mathrm{sgn}\left(\frac{1}{n}\right)\ne \mathrm{sgn}\left(\underset{n\to \mathrm{\infty }}{\lim }\frac{1}{n}\right)$. Thus, the signum function is discontinuous at 0 (see section 2.1.3).

An example of a discontinuous function is the Heaviside step function $H$, defined by $$H(x)=\{\begin{array}{cc}1& \text{ if }x\ge 0\\ 0& \text{ if }x<0\end{array}$$

Pick for instance $\epsilon =1/2$. Then there is no Template:Nowrap around $x=0$, i.e. no open interval $(-\delta ,\delta )$ with $\delta >0,$ that will force all the $H(x)$ values to be within the Template:Nowrap of $H(0)$, i.e. within $(1/2,3/2)$. Intuitively, we can think of this type of discontinuity as a sudden jump in function values.

Similarly, the signum or sign function $$\mathrm{sgn}(x)=\{\begin{array}{cc}1& \text{ if }x>0\\ 0& \text{ if }x=0\\ -1& \text{ if }x<0\end{array}$$ is discontinuous at $x=0$ but continuous everywhere else. Yet another example: the function $$f(x)=\{\begin{array}{cc}\sin \left(x^{-2}\right)& \text{ if }x\ne 0\\ 0& \text{ if }x=0\end{array}$$ is continuous everywhere apart from $x=0$.

Point plot of Thomae's function on the interval (0,1). The topmost point in the middle shows f(1/2) = 1/2.

Besides plausible continuities and discontinuities like above, there are also functions with a behavior, often coined pathological, for example, Thomae's function, $$f(x)=\{\begin{array}{cc}1& \text{ if }x=0\\ \frac{1}{q}& \text{ if }x=\frac{p}{q}\text{(in lowest terms) is a rational number}\\ 0& \text{ if }x\text{ is irrational}.\end{array}$$ is continuous at all irrational numbers and discontinuous at all rational numbers. In a similar vein, Dirichlet's function, the indicator function for the set of rational numbers, $$D(x)=\{\begin{array}{cc}0& \text{ if }x\text{ is irrational }(\in ℝ\setminus \mathbb{Q})\\ 1& \text{ if }x\text{ is rational }(\in \mathbb{Q})\end{array}$$ is nowhere continuous.

Properties

A useful lemma

Let $f(x)$ be a function that is continuous at a point $x_0,$ and $y_0$ be a value such $f\left(x_0\right)\ne y_0.$ Then $f(x)\ne y_0$ throughout some neighbourhood of $x_0.$

Proof: By the definition of continuity, take $\epsilon =\frac{|y_0-f(x_0)|}{2}>0$ , then there exists $\delta >0$ such that $$|f(x)-f(x_0)|<\frac{|y_0-f(x_0)|}{2}\text{ whenever }|x-x_0|<\delta$$ Suppose there is a point in the neighbourhood $|x-x_0|<\delta$ for which $f(x)=y_0;$ then we have the contradiction $$|f(x_0)-y_0|<\frac{|f(x_0)-y_0|}{2}.$$

Intermediate value theorem

The intermediate value theorem is an existence theorem, based on the real number property of completeness, and states:

If the real-valued function f is continuous on the closed interval $[a,b],$ and k is some number between $f(a)$ and $f(b),$ then there is some number $c\in [a,b],$ such that $f(c)=k.$

For example, if a child grows from 1 m to 1.5 m between the ages of two and six years, then, at some time between two and six years of age, the child's height must have been 1.25 m.

As a consequence, if f is continuous on $[a,b]$ and $f(a)$ and $f(b)$ differ in sign, then, at some point $c\in [a,b],$ $f(c)$ must equal zero.

Extreme value theorem

The extreme value theorem states that if a function f is defined on a closed interval $[a,b]$ (or any closed and bounded set) and is continuous there, then the function attains its maximum, i.e. there exists $c\in [a,b]$ with $f(c)\ge f(x)$ for all $x\in [a,b].$ The same is true of the minimum of f. These statements are not, in general, true if the function is defined on an open interval $(a,b)$ (or any set that is not both closed and bounded), as, for example, the continuous function $f(x)=\frac{1}{x},$ defined on the open interval (0,1), does not attain a maximum, being unbounded above.

Relation to differentiability and integrability

Every differentiable function $$f:(a,b)\to ℝ$$ is continuous, as can be shown. The converse does not hold: for example, the absolute value function

$f(x)=|x|=\{\begin{array}{cc}x& \text{ if }x\ge 0\\ -x& \text{ if }x<0\end{array}$

is everywhere continuous. However, it is not differentiable at $x=0$ (but is so everywhere else). Weierstrass's function is also everywhere continuous but nowhere differentiable.

The derivative f′(x) of a differentiable function f(x) need not be continuous. If f′(x) is continuous, f(x) is said to be continuously differentiable. The set of such functions is denoted $C^1((a,b)).$ More generally, the set of functions $$f:\mathrm{\Omega }\to ℝ$$ (from an open interval (or open subset of $ℝ$) $\mathrm{\Omega }$ to the reals) such that f is $n$ times differentiable and such that the $n$-th derivative of f is continuous is denoted $C^n(\mathrm{\Omega }).$ See differentiability class. In the field of computer graphics, properties related (but not identical) to $C^0,C^1,C^2$ are sometimes called $G^0$ (continuity of position), $G^1$ (continuity of tangency), and $G^2$ (continuity of curvature); see Smoothness of curves and surfaces.

Every continuous function $$f:[a,b]\to ℝ$$ is integrable (for example in the sense of the Riemann integral). The converse does not hold, as the (integrable but discontinuous) sign function shows.

Pointwise and uniform limits

A sequence of continuous functions $f_n(x)$ whose (pointwise) limit function $f(x)$ is discontinuous. The convergence is not uniform.

Given a sequence $$f_1,f_2,\dots :I\to ℝ$$ of functions such that the limit $$f(x):=\underset{n\to \mathrm{\infty }}{\lim }{f}_n(x)$$ exists for all $x\in D,$, the resulting function $f(x)$ is referred to as the pointwise limit of the sequence of functions ${\left(f_n\right)}_{n\in N}.$ The pointwise limit function need not be continuous, even if all functions $f_n$ are continuous, as the animation at the right shows. However, f is continuous if all functions $f_n$ are continuous and the sequence converges uniformly, by the uniform convergence theorem. This theorem can be used to show that the exponential functions, logarithms, square root function, and trigonometric functions are continuous.

Directional Continuity

• 
  A right-continuous function
• 
  A left-continuous function

Discontinuous functions may be discontinuous in a restricted way, giving rise to the concept of directional continuity (or right and left continuous functions) and semi-continuity. Roughly speaking, a function is Template:Em if no jump occurs when the limit point is approached from the right. Formally, f is said to be right-continuous at the point c if the following holds: For any number $\epsilon >0$ however small, there exists some number $\delta >0$ such that for all x in the domain with $c<x<c+\delta ,$ the value of $f(x)$ will satisfy $$|f(x)-f(c)|<\epsilon .$$

This is the same condition as continuous functions, except it is required to hold for x strictly larger than c only. Requiring it instead for all x with $c-\delta <x<c$ yields the notion of Template:Em functions. A function is continuous if and only if it is both right-continuous and left-continuous.

Semicontinuity

Template:Main A function f is Template:Em if, roughly, any jumps that might occur only go down, but not up. That is, for any $\epsilon >0,$ there exists some number $\delta >0$ such that for all x in the domain with $|x-c|<\delta ,$ the value of $f(x)$ satisfies $$f(x)\ge f(c)-ϵ.$$ The reverse condition is Template:Em.

Continuous functions between metric spaces

The concept of continuous real-valued functions can be generalized to functions between metric spaces. A metric space is a set $X$ equipped with a function (called metric) $d_X,$ that can be thought of as a measurement of the distance of any two elements in X. Formally, the metric is a function $$d_X:X\times X\to ℝ$$ that satisfies a number of requirements, notably the triangle inequality. Given two metric spaces $(X,d_X)$ and $(Y,d_Y)$ and a function $$f:X\to Y$$ then $f$ is continuous at the point $c\in X$ (with respect to the given metrics) if for any positive real number $\epsilon >0,$ there exists a positive real number $\delta >0$ such that all $x\in X$ satisfying $d_X(x,c)<\delta$ will also satisfy $d_Y(f(x),f(c))<\epsilon .$ As in the case of real functions above, this is equivalent to the condition that for every sequence $\left(x_n\right)$ in $X$ with limit $\lim x_n=c,$ we have $\lim f\left(x_n\right)=f(c).$ The latter condition can be weakened as follows: $f$ is continuous at the point $c$ if and only if for every convergent sequence $\left(x_n\right)$ in $X$ with limit $c$, the sequence $\left(f\left(x_n\right)\right)$ is a Cauchy sequence, and $c$ is in the domain of $f$.

The set of points at which a function between metric spaces is continuous is a $G_{\delta }$ set – this follows from the $\epsilon -\delta$ definition of continuity.

This notion of continuity is applied, for example, in functional analysis. A key statement in this area says that a linear operator $$T:V\to W$$ between normed vector spaces $V$ and $W$ (which are vector spaces equipped with a compatible norm, denoted $\Vert x\Vert$) is continuous if and only if it is bounded, that is, there is a constant $K$ such that $$\Vert T(x)\Vert \le K\Vert x\Vert$$ for all $x\in V.$

Uniform, Hölder and Lipschitz continuity

For a Lipschitz continuous function, there is a double cone (shown in white) whose vertex can be translated along the graph so that the graph always remains entirely outside the cone.

The concept of continuity for functions between metric spaces can be strengthened in various ways by limiting the way $\delta$ depends on $\epsilon$ and c in the definition above. Intuitively, a function f as above is uniformly continuous if the $\delta$ does not depend on the point c. More precisely, it is required that for every real number $\epsilon >0$ there exists $\delta >0$ such that for every $c,b\in X$ with $d_X(b,c)<\delta ,$ we have that $d_Y(f(b),f(c))<\epsilon .$ Thus, any uniformly continuous function is continuous. The converse does not generally hold but holds when the domain space X is compact. Uniformly continuous maps can be defined in the more general situation of uniform spaces.

A function is Hölder continuous with exponent α (a real number) if there is a constant K such that for all $b,c\in X,$ the inequality $$d_Y(f(b),f(c))\le K\cdot (d_X(b,c){)}^{\alpha }$$ holds. Any Hölder continuous function is uniformly continuous. The particular case $\alpha =1$ is referred to as Lipschitz continuity. That is, a function is Lipschitz continuous if there is a constant K such that the inequality $$d_Y(f(b),f(c))\le K\cdot d_X(b,c)$$ holds for any $b,c\in X.$ The Lipschitz condition occurs, for example, in the Picard–Lindelöf theorem concerning the solutions of ordinary differential equations.

Template:AnchorContinuous functions between topological spaces

Another, more abstract, notion of continuity is the continuity of functions between topological spaces in which there generally is no formal notion of distance, as there is in the case of metric spaces. A topological space is a set X together with a topology on X, which is a set of subsets of X satisfying a few requirements with respect to their unions and intersections that generalize the properties of the open balls in metric spaces while still allowing one to talk about the neighborhoods of a given point. The elements of a topology are called open subsets of X (with respect to the topology).

A function $$f:X\to Y$$ between two topological spaces X and Y is continuous if for every open set $V\subseteq Y,$ the inverse image $$f^{-1}(V)=\{x\in X|f(x)\in V\}$$ is an open subset of X. That is, f is a function between the sets X and Y (not on the elements of the topology $T_X$), but the continuity of f depends on the topologies used on X and Y.

This is equivalent to the condition that the preimages of the closed sets (which are the complements of the open subsets) in Y are closed in X.

An extreme example: if a set X is given the discrete topology (in which every subset is open), all functions $$f:X\to T$$ to any topological space T are continuous. On the other hand, if X is equipped with the indiscrete topology (in which the only open subsets are the empty set and X) and the space T set is at least T₀, then the only continuous functions are the constant functions. Conversely, any function whose codomain is indiscrete is continuous.

Continuity at a point

Continuity at a point: For every neighborhood V of $f(x)$, there is a neighborhood U of x such that $f(U)\subseteq V$

The translation in the language of neighborhoods of the $(\epsilon ,\delta )$-definition of continuity leads to the following definition of the continuity at a point: Template:Quote frame

This definition is equivalent to the same statement with neighborhoods restricted to open neighborhoods and can be restated in several ways by using preimages rather than images.

Also, as every set that contains a neighborhood is also a neighborhood, and $f^{-1}(V)$ is the largest subset Template:Mvar of Template:Mvar such that $f(U)\subseteq V,$ this definition may be simplified into: Template:Quote frame

As an open set is a set that is a neighborhood of all its points, a function $f:X\to Y$ is continuous at every point of Template:Mvar if and only if it is a continuous function.

If X and Y are metric spaces, it is equivalent to consider the neighborhood system of open balls centered at x and f(x) instead of all neighborhoods. This gives back the above $\epsilon -\delta$ definition of continuity in the context of metric spaces. In general topological spaces, there is no notion of nearness or distance. If, however, the target space is a Hausdorff space, it is still true that f is continuous at a if and only if the limit of f as x approaches a is f(a). At an isolated point, every function is continuous.

Given $x\in X,$ a map $f:X\to Y$ is continuous at $x$ if and only if whenever $ℬ$ is a filter on $X$ that converges to $x$ in $X,$ which is expressed by writing $ℬ\to x,$ then necessarily $f(ℬ)\to f(x)$ in $Y.$ If $𝒩(x)$ denotes the neighborhood filter at $x$ then $f:X\to Y$ is continuous at $x$ if and only if $f(𝒩(x))\to f(x)$ in $Y.$Template:Sfn Moreover, this happens if and only if the prefilter $f(𝒩(x))$ is a filter base for the neighborhood filter of $f(x)$ in $Y.$Template:Sfn

Alternative definitions

Several equivalent definitions for a topological structure exist; thus, several equivalent ways exist to define a continuous function.

Sequences and nets Template:Anchor

In several contexts, the topology of a space is conveniently specified in terms of limit points. This is often accomplished by specifying when a point is the limit of a sequence. Still, for some spaces that are too large in some sense, one specifies also when a point is the limit of more general sets of points indexed by a directed set, known as nets. A function is (Heine-)continuous only if it takes limits of sequences to limits of sequences. In the former case, preservation of limits is also sufficient; in the latter, a function may preserve all limits of sequences yet still fail to be continuous, and preservation of nets is a necessary and sufficient condition.

In detail, a function $f:X\to Y$ is sequentially continuous if whenever a sequence $\left(x_n\right)$ in $X$ converges to a limit $x,$ the sequence $\left(f\left(x_n\right)\right)$ converges to $f(x).$ Thus, sequentially continuous functions "preserve sequential limits." Every continuous function is sequentially continuous. If $X$ is a first-countable space and countable choice holds, then the converse also holds: any function preserving sequential limits is continuous. In particular, if $X$ is a metric space, sequential continuity and continuity are equivalent. For non-first-countable spaces, sequential continuity might be strictly weaker than continuity. (The spaces for which the two properties are equivalent are called sequential spaces.) This motivates the consideration of nets instead of sequences in general topological spaces. Continuous functions preserve the limits of nets, and this property characterizes continuous functions.

For instance, consider the case of real-valued functions of one real variable:

Template:Math theorem Template:Collapse top Proof. Assume that $f:A\subseteq ℝ\to ℝ$ is continuous at $x_0$ (in the sense of $ϵ-\delta$ continuity). Let ${\left(x_n\right)}_{n\ge 1}$ be a sequence converging at $x_0$ (such a sequence always exists, for example, $x_n=x,\text{ for all }n$); since $f$ is continuous at $x_0$ $$\mathrm{\forall }ϵ>0\mathrm{\exists }{\delta }_{ϵ}>0:0<|x-x_0|<{\delta }_{ϵ}⟹|f(x)-f(x_0)|<ϵ.(*)$$ For any such ${\delta }_{ϵ}$ we can find a natural number ${\nu }_{ϵ}>0$ such that for all $n>{\nu }_{ϵ},$ $$|x_n-x_0|<{\delta }_{ϵ},$$ since $\left(x_n\right)$ converges at $x_0$; combining this with $(*)$ we obtain $$\mathrm{\forall }ϵ>0\mathrm{\exists }{\nu }_{ϵ}>0:\mathrm{\forall }n>{\nu }_{ϵ}|f(x_n)-f(x_0)|<ϵ.$$ Assume on the contrary that $f$ is sequentially continuous and proceed by contradiction: suppose $f$ is not continuous at $x_0$ $$\mathrm{\exists }ϵ>0:\mathrm{\forall }{\delta }_{ϵ}>0,\mathrm{\exists }{x}_{{\delta }_{ϵ}}:0<|x_{{\delta }_{ϵ}}-x_0|<{\delta }_{ϵ}⟹|f(x_{{\delta }_{ϵ}})-f(x_0)|>ϵ$$ then we can take ${\delta }_{ϵ}=1/n,\mathrm{\forall }n>0$ and call the corresponding point $x_{{\delta }_{ϵ}}=:x_n$: in this way we have defined a sequence $(x_n{)}_{n\ge 1}$ such that $$\mathrm{\forall }n>0|x_n-x_0|<\frac{1}{n},|f(x_n)-f(x_0)|>ϵ$$ by construction $x_n\to x_0$ but $f(x_n)\to ̸f(x_0)$, which contradicts the hypothesis of sequential continuity. $◼$ Template:Collapse bottom

Closure operator and interior operator definitions

In terms of the interior operator, a function $f:X\to Y$ between topological spaces is continuous if and only if for every subset $B\subseteq Y,$ $$f^{-1}\left({\mathrm{int}}_{Y}B\right)\subseteq {\mathrm{int}}_X(f^{-1}(B)).$$

In terms of the closure operator, $f:X\to Y$ is continuous if and only if for every subset $A\subseteq X,$ $$f\left({\mathrm{cl}}_{X}A\right)\subseteq {\mathrm{cl}}_Y(f(A)).$$ That is to say, given any element $x\in X$ that belongs to the closure of a subset $A\subseteq X,$ $f(x)$ necessarily belongs to the closure of $f(A)$ in $Y.$ If we declare that a point $x$ is Template:Em a subset $A\subseteq X$ if $x\in {\mathrm{cl}}_{X}A,$ then this terminology allows for a plain English description of continuity: $f$ is continuous if and only if for every subset $A\subseteq X,$ $f$ maps points that are close to $A$ to points that are close to $f(A).$ Similarly, $f$ is continuous at a fixed given point $x\in X$ if and only if whenever $x$ is close to a subset $A\subseteq X,$ then $f(x)$ is close to $f(A).$

Instead of specifying topological spaces by their open subsets, any topology on $X$ can alternatively be determined by a closure operator or by an interior operator. Specifically, the map that sends a subset $A$ of a topological space $X$ to its topological closure ${\mathrm{cl}}_{X}A$ satisfies the Kuratowski closure axioms. Conversely, for any closure operator $A\mapsto \mathrm{cl}A$ there exists a unique topology $\tau$ on $X$ (specifically, $\tau :=\{X\setminus \mathrm{cl}A:A\subseteq X\}$) such that for every subset $A\subseteq X,$ $\mathrm{cl}A$ is equal to the topological closure ${\mathrm{cl}}_{(X,\tau )}A$ of $A$ in $(X,\tau ).$ If the sets $X$ and $Y$ are each associated with closure operators (both denoted by $\mathrm{cl}$) then a map $f:X\to Y$ is continuous if and only if $f(\mathrm{cl}A)\subseteq \mathrm{cl}(f(A))$ for every subset $A\subseteq X.$

Similarly, the map that sends a subset $A$ of $X$ to its topological interior ${\mathrm{int}}_{X}A$ defines an interior operator. Conversely, any interior operator $A\mapsto \mathrm{int}A$ induces a unique topology $\tau$ on $X$ (specifically, $\tau :=\{\mathrm{int}A:A\subseteq X\}$) such that for every $A\subseteq X,$ $\mathrm{int}A$ is equal to the topological interior ${\mathrm{int}}_{(X,\tau )}A$ of $A$ in $(X,\tau ).$ If the sets $X$ and $Y$ are each associated with interior operators (both denoted by $\mathrm{int}$) then a map $f:X\to Y$ is continuous if and only if $f^{-1}(\mathrm{int}B)\subseteq \mathrm{int}(f^{-1}(B))$ for every subset $B\subseteq Y.$

Filters and prefilters

Continuity can also be characterized in terms of filters. A function $f:X\to Y$ is continuous if and only if whenever a filter $ℬ$ on $X$ converges in $X$ to a point $x\in X,$ then the prefilter $f(ℬ)$ converges in $Y$ to $f(x).$ This characterization remains true if the word "filter" is replaced by "prefilter."Template:Sfn

Properties

If $f:X\to Y$ and $g:Y\to Z$ are continuous, then so is the composition $g\circ f:X\to Z.$ If $f:X\to Y$ is continuous and

• X is compact, then f(X) is compact.
• X is connected, then f(X) is connected.
• X is path-connected, then f(X) is path-connected.
• X is Lindelöf, then f(X) is Lindelöf.
• X is separable, then f(X) is separable.

The possible topologies on a fixed set X are partially ordered: a topology ${\tau }_1$ is said to be coarser than another topology ${\tau }_2$ (notation: ${\tau }_1\subseteq {\tau }_2$) if every open subset with respect to ${\tau }_1$ is also open with respect to ${\tau }_2.$ Then, the identity map $${\mathrm{id}}_X:(X,{\tau }_2)\to (X,{\tau }_1)$$ is continuous if and only if ${\tau }_1\subseteq {\tau }_2$ (see also comparison of topologies). More generally, a continuous function $$(X,{\tau }_X)\to (Y,{\tau }_Y)$$ stays continuous if the topology ${\tau }_Y$ is replaced by a coarser topology and/or ${\tau }_X$ is replaced by a finer topology.

Homeomorphisms

Symmetric to the concept of a continuous map is an open map, for which Template:Em of open sets are open. If an open map f has an inverse function, that inverse is continuous, and if a continuous map g has an inverse, that inverse is open. Given a bijective function f between two topological spaces, the inverse function $f^{-1}$ need not be continuous. A bijective continuous function with a continuous inverse function is called a Template:Em.

If a continuous bijection has as its domain a compact space and its codomain is Hausdorff, then it is a homeomorphism.

Defining topologies via continuous functions

Given a function $$f:X\to S,$$ where X is a topological space and S is a set (without a specified topology), the final topology on S is defined by letting the open sets of S be those subsets A of S for which $f^{-1}(A)$ is open in X. If S has an existing topology, f is continuous with respect to this topology if and only if the existing topology is coarser than the final topology on S. Thus, the final topology is the finest topology on S that makes f continuous. If f is surjective, this topology is canonically identified with the quotient topology under the equivalence relation defined by f.

Dually, for a function f from a set S to a topological space X, the initial topology on S is defined by designating as an open set every subset A of S such that $A=f^{-1}(U)$ for some open subset U of X. If S has an existing topology, f is continuous with respect to this topology if and only if the existing topology is finer than the initial topology on S. Thus, the initial topology is the coarsest topology on S that makes f continuous. If f is injective, this topology is canonically identified with the subspace topology of S, viewed as a subset of X.

A topology on a set S is uniquely determined by the class of all continuous functions $S\to X$ into all topological spaces X. Dually, a similar idea can be applied to maps $X\to S.$

Related notions

If $f:S\to Y$ is a continuous function from some subset $S$ of a topological space $X$ then a Template:Em of $f$ to $X$ is any continuous function $F:X\to Y$ such that $F(s)=f(s)$ for every $s\in S,$ which is a condition that often written as $f=F{|}_S.$ In words, it is any continuous function $F:X\to Y$ that restricts to $f$ on $S.$ This notion is used, for example, in the Tietze extension theorem and the Hahn–Banach theorem. If $f:S\to Y$ is not continuous, then it could not possibly have a continuous extension. If $Y$ is a Hausdorff space and $S$ is a dense subset of $X$ then a continuous extension of $f:S\to Y$ to $X,$ if one exists, will be unique. The Blumberg theorem states that if $f:ℝ\to ℝ$ is an arbitrary function then there exists a dense subset $D$ of $ℝ$ such that the restriction $f{|}_D:D\to ℝ$ is continuous; in other words, every function $ℝ\to ℝ$ can be restricted to some dense subset on which it is continuous.

Various other mathematical domains use the concept of continuity in different but related meanings. For example, in order theory, an order-preserving function $f:X\to Y$ between particular types of partially ordered sets $X$ and $Y$ is continuous if for each directed subset $A$ of $X,$ we have $\sup f(A)=f(\sup A).$ Here $\sup$ is the supremum with respect to the orderings in $X$ and $Y,$ respectively. This notion of continuity is the same as topological continuity when the partially ordered sets are given the Scott topology.

In category theory, a functor $$F:𝒞\to 𝒟$$ between two categories is called Template:Em if it commutes with small limits. That is to say, $$\underset{i\in I}{\underleftarrow{\lim }}F(C_i)\cong F\left(\underset{i\in I}{\underleftarrow{\lim }}{C}_i\right)$$ for any small (that is, indexed by a set $I,$ as opposed to a class) diagram of objects in $𝒞$.

A Template:Em is a generalization of metric spaces and posets, which uses the concept of quantales, and that can be used to unify the notions of metric spaces and domains.

In measure theory, a function $f:E\to {ℝ}^k$ defined on a Lebesgue measurable set $E\subseteq {ℝ}^n$ is called approximately continuous at a point $x_0\in E$ if the approximate limit of $f$ at $x_0$ exists and equals $f(x_0)$. This generalizes the notion of continuity by replacing the ordinary limit with the approximate limit. A fundamental result known as the Stepanov-Denjoy theorem states that a function is measurable if and only if it is approximately continuous almost everywhere.

See also

• Continuity (mathematics)
• Absolute continuity
• Approximate continuity
• Dini continuity
• Equicontinuity
• Geometric continuity
• Parametric continuity
• Classification of discontinuities
• Coarse function
• Continuous function (set theory)
• Continuous stochastic process
• Normal function
• Open and closed maps
• Piecewise
• Symmetrically continuous function

• Direction-preserving function - an analog of a continuous function in discrete spaces.

Bibliography

• Template:Dugundji Topology
• Template:Springer