Natural units

Template:Short description In physics, natural unit systems are measurement systems for which selected physical constants have been set to 1 through nondimensionalization of physical units. For example, the speed of light Template:Math may be set to 1, and it may then be omitted, equating mass and energy directly Template:Math rather than using Template:Math as a conversion factor in the typical mass–energy equivalence equation Template:Math. A purely natural system of units has all of its dimensions collapsed, such that the physical constants completely define the system of units and the relevant physical laws contain no conversion constants.

While natural unit systems simplify the form of each equation, it is still necessary to keep track of the non-collapsed dimensions of each quantity or expression in order to reinsert physical constants (such dimensions uniquely determine the full formula).

Systems of natural units

Summary table

where:

• Template:Mvar is the fine-structure constant, Template:Math = Template:Physconst
• Template:Mvar_e is the Coulomb constant, Template:Math ≈ Template:Val, so assigning it a value also assigns Template:Mvar₀ a value.
• Template:Math ≈ Template:Val
• Template:Mvar_e is the mass of an electron, Template:Physconst
• Template:Math ≈ Template:Val
• Template:Mvar_p is the mass of a proton, Template:Physconst
• — indicates where the system is not sufficient to express the quantity.
• Template:Mvar_B, the Boltzmann constant, has no interactions with the other constants - it is used only to redefine temperature.

Stoney units

Stoney system dimensions in SI units

Quantity	Expression	Approx. metric value
Length	$\frac{e\sqrt{G{k}_{\text{e}}}}{c^2}$	Template:Val
Mass	$e\sqrt{\frac{k_{\text{e}}}{G}}$	Template:Val
Time	$\frac{e\sqrt{G{k}_{\text{e}}}}{c^3}$	Template:Val
Electric charge	$e$	Template:Val

The Stoney unit system uses the following defining constants:

Template:Math, Template:Math, Template:Math, Template:Math,

where Template:Math is the speed of light, Template:Math is the gravitational constant, Template:Math is the Coulomb constant, and Template:Math is the elementary charge.

George Johnstone Stoney's unit system preceded that of Planck by 30 years. He presented the idea in a lecture entitled "On the Physical Units of Nature" delivered to the British Association in 1874. Stoney units did not consider the Planck constant, which was discovered only after Stoney's proposal. Template:Clear

Planck units

Planck dimensions in SI units

Quantity	Expression	Approx. metric value
Length	$\sqrt{\frac{\hslash G}{c^3}}$	Template:ValTemplate:Physconst
Mass	$\sqrt{\frac{\hslash c}{G}}$	Template:ValTemplate:Physconst
Time	$\sqrt{\frac{\hslash G}{c^5}}$	Template:ValTemplate:Physconst
Temperature	$\frac{\sqrt{\hslash c^5}}{k_{\text{B}}\sqrt{G}}$	Template:ValTemplate:Physconst

The Planck unit system uses the following defining constants:

Template:Math, Template:Math, Template:Math, Template:Math,

where Template:Math is the speed of light, Template:Math is the reduced Planck constant, Template:Math is the gravitational constant, and Template:Math is the Boltzmann constant.

Planck units form a system of natural units that is not defined in terms of properties of any prototype, physical object, or even elementary particle. They only refer to the basic structure of the laws of physics: Template:Math and Template:Math are part of the structure of spacetime in general relativity, and Template:Math is at the foundation of quantum mechanics. This makes Planck units particularly convenient and common in theories of quantum gravity, including string theory.Template:Citation needed

Planck considered only the units based on the universal constants Template:Math, Template:Math, Template:Math, and Template:Math_B to arrive at natural units for length, time, mass, and temperature, but no electromagnetic units. The Planck system of units is now understood to use the reduced Planck constant, Template:Math, in place of the Planck constant, Template:Math. Template:Clear

Geometrized units

The geometrized units system uses the following defining constants:

Template:Math, Template:Math.

The geometrized unit system,Template:Rp used in general relativity; the base physical units are chosen so that the speed of light, Template:Math, and the gravitational constant, Template:Math, are set to one.

Atomic units

Atomic-unit dimensions in SI units

Quantity	Expression	Metric value
Length	$\frac{4\pi {ϵ}_0{\hslash }^2}{m_{\text{e}}{e}^2}$	Template:Val
Mass	$m_{\text{e}}$	Template:Val
Time	$\frac{16{\pi }^2{ϵ}_0^2{\hslash }^3}{m_{\text{e}}{e}^4}$	Template:Val
Electric charge	$e$	Template:Val

The atomic unit system uses the following defining constants:Template:Rp

Template:Math, Template:Math, Template:Math, Template:Math (this is exactly the same as using Template:Mvar_e, except in which constant you use when expressing the conversion).

The atomic units were first proposed by Douglas Hartree and are designed to simplify atomic and molecular physics and chemistry, especially the hydrogen atom.Template:Rp For example, in atomic units, in the Bohr model of the hydrogen atom an electron in the ground state has orbital radius, orbital velocity and so on with particularly simple numeric values. Template:Clear

Schrödinger units

Schrödinger system dimensions in SI units

Quantity	Expression	Approx. metric value
Length	$\frac{{\hslash }^2}{e^3}\sqrt{\frac{G}{k_{\mathrm{e}}^3}}$	Template:Val
Mass	$e\sqrt{\frac{k_{\mathrm{e}}}{G}}$	Template:Val
Time	$\frac{{\hslash }^3}{e^5}\sqrt{\frac{G}{k_{\mathrm{e}}^5}}$	Template:Val
Electric charge	$e$	Template:ValTemplate:Physconst

The Schrödinger system of units (named after Austrian physicist Erwin Schrödinger) were mentioned by Michael Duff (physicist) in his analysis of fundamental constants. Its defining constants are:

Template:Math, Template:Math, Template:Math, Template:Mvar_e.

Natural units (particle and atomic physics)

Particle and Atomic Physics system dimensions in SI units

Quantity	Expression	Metric value
Length	$\frac{\hslash }{m_{\text{e}}c}$	Template:Val
Mass	$m_{\text{e}}$	Template:Val
Time	$\frac{\hslash }{m_{\text{e}}{c}^2}$	Template:Val
Electric charge	$\sqrt{{\epsilon }_0\hslash c}$	Template:Val

This natural unit system, used only in the fields of particle and atomic physics, uses the following defining constants:Template:Rp

Template:Math, Template:Math, Template:Math, Template:Math,

where Template:Math is the speed of light, Template:Math_e is the electron mass, Template:Math is the reduced Planck constant, and Template:Math₀ is the vacuum permittivity.

The vacuum permittivity Template:Math₀ is implicitly used as a nondimensionalization constant, as is evident from the physicists' expression for the fine-structure constant, written Template:Math, which may be compared to the corresponding expression in SI: Template:Math.Template:Rp Template:Clear

Strong units

Strong-unit dimensions in SI units

Quantity	Expression	Metric value
Length	$\frac{\hslash }{m_{\text{p}}c}$	Template:Val
Mass	$m_{\text{p}}$	Template:Val
Time	$\frac{\hslash }{m_{\text{p}}{c}^2}$	Template:Val

Defining constants:

Template:Math, Template:Math, Template:Math.

Here, Template:Math is the proton rest mass. Strong units are "convenient for work in QCD and nuclear physics, where quantum mechanics and relativity are omnipresent and the proton is an object of central interest".

See also

• Anthropic units
• Astronomical system of units
• Dimensionless physical constant
• International System of Units
• N-body units
• Outline of metrology and measurement
• Unit of measurement

External links

• The NIST website (National Institute of Standards and Technology) is a convenient source of data on the commonly recognized constants.
• K.A. Tomilin: NATURAL SYSTEMS OF UNITS; To the Centenary Anniversary of the Planck System Template:Webarchive A comparative overview/tutorial of various systems of natural units having historical use.
• Pedagogic Aides to Quantum Field Theory Click on the link for Chap. 2 to find an extensive, simplified introduction to natural units.
• Natural System Of Units In General Relativity (PDF), by Alan L. Myers (University of Pennsylvania). Equations for conversions from natural to SI units.