Search results

...ng where the attacker is lying about a vehicle's position to disrupt VANET safety application. This attack can be performed either through existent vehicles ...nce techniques against traffic accidents.<ref>Leonard Evans. A new traffic safety vision for the united states. American Journal of Public Health, 93(9):1384 ...

...s in a stream of traffic. Limitations on driver and vehicle parameters for safety purposes mimic the traits of vehicles following vehicles in the front of th Gipps sets limitations on the model through safety considerations and assuming a driver would estimate his or her speed based ...

Even if the slip angle and [[camber angle]] are zero, and the road is flat, this torque will still be generated due to asymmetries in the tire [[Category:Automotive safety]] ...

...w.sciencedirect.com/science/article/pii/S0957582021006959 |journal=Process Safety and Environmental Protection |volume=158 |pages=461–473 |doi=10.1016/j.psep ...

...e|paved]] roads.<ref name="ritchie" /> Various devices, with names such as road bands, have been developed to temporarily cover grousers/cleats in order to ...ted tracks, but racing snowmobiles are banned from using cleated track for safety reasons and instead use rubber tracks.<ref>{{cite web|url=http://cs.amsnow. ...

...er|ISO 26262#Part 9: Automotive Safety Integrity Level (ASIL)-oriented and safety-oriented analysis}} ...erity, Exposure and Controllability of the vehicle operating scenario. The safety goal for that hazard in turn carries the ASIL requirements. ...

...level crossing|grade crossings]]. Like [[Speed limits in the United States|road speed limits in the United States]], speed limits for [[railway track|track ...><ref>{{cite book|author=John Gruber and Brian Solomon|title=The Milwaukee Road's Hiawathas|publisher=Voyageur Press|year=2006|isbn=978-0-7603-2395-3}}</re ...

...ner, Rehborn H., Traffic surveillance method and vehicle flow control in a road network, Deutsche Patentoffenlegung DE19835979A1, USA patent: US 6587779B1 ...ongestion reconstructed by the ASDA/FOTO models using raw data measured by road detectors on different highways in the United Kingdom, Germany, and the USA ...

{{Short description|Geometry of road design}} .... The basic objectives in geometric design are to optimize efficiency and safety while minimizing cost and environmental damage. Geometric design also affec ...

...escription|Rate of change in elevation between the two rails or edges of a road}}{{other uses|Cant (disambiguation)}} ...railway or road is curved; raising the outer rail or the outer edge of the road creates a [[banked turn]], thus allowing vehicles to travel round the curve ...

...s]] will revolve when the driver spins the steering wheel illuminating the road around bends. ...ts.org/car-safety/collision-avoidance-systems-are-changing-the-look-of-car-safety/ |access-date=2024-09-04 |website=Consumer Reports|date=17 December 2015 }} ...

|title = Macrolevel Model Development for Safety Assessment of Road Network Structures ...

...Democracy Education Trust|isbn= 9781868729067|lccn= 2004448218|series= The Road to Democracy in South Africa|url= https://books.google.com/books?id=qIQttVh ...London, accompanied by his family. He later stated that he feared for his safety and that of his family, since a day before his departure, the South African ...

The IBRD has several different projects happening some of them are for road construction. There are also loans for policy development, which result in ...s economy was reactivated and it is globally recognized for effective food safety and surveillance. Since 1996 livestock production has grown 124% which prov ...

'''Overhangs''' are the lengths of a [[road vehicle]] which extend beyond the [[wheelbase]] at the front and rear. The ...ate larger engines. Large overhangs also contribute to [[Automobile safety|safety]] due to increased bulk, as well as space for [[crumple zones]] that provid ...

...on construction costs and operating costs and, in combination with [[Cant (road/rail)#Rail|superelevation]] (difference in elevation of the two rails) in t ...ilments. The gentler the curves, the greater the visibility, thus boosting safety via increased situational awareness. The earliest [[Rail profile|rails]] we ...

...The boiler was also fitted with three 4″ MÁV-style[4] direct spring-loaded safety valves and a so-called smoke evacuator. The boiler was fed with water bytwo ! Road number ...

...lar was installed, similar to the one for coals at the base of that forest road which was then set up for the dump trucks to come and pour the fresh concre ...cally as a network of interlocking bars (diameters of PC52 ø12-14 mm). For safety, some beilageres (bearing systems that allowed a tolerance of 20 cm, necess ...

...ferent triggering mechanisms, designing of optimal slopes with regard to [[safety]], [[Reliability engineering|reliability]] and [[economics]], and designing ...er equivalent measure) required for equilibrium. If the value of factor of safety is less than 1.0, the slope is unstable. ...

...hin a system and therefore lead to an improvement in the overall levels of safety. There exist three primary reasons for conducting an HRA; error identifica ...s responsible for the task of de-coupling a filling hose from a chemical [[road tanker]]. There exists the possibility that the operator may forget to clo ...