Search results

...e|Hotchkiss layout]] of front engine, and rear wheel drive through a solid rear axle.}} The mass of the driving axle was greater but with the softer spring ...g, insbesondere für Kraftfahrzeuge [Wheel suspension, especially for motor vehicles]|inventor1-last=Dubonnet|inventor1-first=André}}</ref> (heir to the [[Dubon ...

| layout = Dual-motors, [[four-wheel drive]] File:Hongqi E-HS9 IMG005.jpg|Hongqi E-HS9 rear ...

[[File:Overhang001.svg|thumb|right|A: front overhang, B: rear overhang]] ...ront and rear. They are normally described as '''front overhang''' and '''rear overhang'''. Practicality, style, and performance are affected by the size ...

| layout = [[Front-engine, front-wheel-drive layout|Front-engine, front-wheel drive]] ...anhardclub.nl}}</ref> The resulting prototype was also a small front-wheel drive car powered by an air-cooled two-cylinder boxer engine.<ref name="velocebio ...

| layout = [[Front-engine, front-wheel-drive layout|Front-engine, front-wheel drive]] ...or Deutsch and is considered a continuation of the line of Panhard-powered vehicles built by [[DB (car)|Deutsch-Bonnet]]. The car was the production version of ...

| designer = [[:en:Four Wheel Drive|FWD England]] | drive = [[6×6]] ...

...al nightclub)}}{{Redirect|Wheel stand|the bicycle wheel straightening tool|wheel truing stand}} ...ually associated with bicycles and motorcycles, but can be done with other vehicles such as cars, especially in [[drag racing]] and [[tractor pulling]]. ...

...n the parlance of the time, the 'locomotive galley'). The extension of the rear frame section rested on the front frame section via a sliding plate. The fr Wheel arrangement (Jelleg): (1'C)'C–h4v ...

...s. The rules specified that the car's suspension, engine gearbox and final drive should all come from a car produced in volume. Engines could displace eithe ..., resulting in the car having one forward gear and four reverse. The crown-wheel was subsequently moved. The DS104 debuted at [[Oulton Park]], where it won ...

| layout =[[Rear mid-engine, rear-wheel-drive layout|MR layout]] with [[Transverse engine]] ...he conversion raised power to {{cvt|200|bhp|kW|1}}. Rews also modified the rear suspension geometry to add toe-in to improve the car's handling. 19 cars re ...

| layout = Front engine, permanent all-wheel drive ...ssified as either a [[Driver's license#Permits for different categories of vehicles|7.5-tonne lorry (C1), a 40-tonne lorry (C)]], or [[Driving licence in Germa ...

...y bought automatic transmissions of other vendors, such as the [[Automatic Drive|Detroit gear]] 3-speed automatic transmission from [[BorgWarner]] for the [ ...th [[longitudinal engine|longitudinal]] layout for [[car layout|rear-wheel-drive layout]] [[Car|passenger cars]]. The control of the fully automatic system ...

...y they run primarily on roads, seat one to eight people, have four [[tyre (wheel)|tires]], and mainly transport people rather than goods.<ref>{{cite book |t ...dy of automotive engineering is to design, develop, fabricate, and testing vehicles or vehicle components from the concept stage to production stage. Productio ...

...ttp://www.xtrac.com/pdfs/Torotrak_Xtrac_CVT.pdf Torotrak Toroidal variable drive CVT] {{webarchive |url=https://web.archive.org/web/20110516084534/http://ww ...energy at once; this is commonly referred to as "flywheel explosion" since wheel fragments can reach kinetic energy comparable to that of a bullet. Composit ...

!colspan="13"| 2017: Commercial Vehicles In addition to the rear-wheel drive variant, two different [[four-wheel drive]] versions were available, with a version destined for [[Volkswagen Group]] ...

.... After drawing or spinning, the polymer filament yarns are then heated to drive off non-carbon atoms ([[carbonization]]), producing the final carbon fiber. ...ation needed|date=April 2019}} Moreover, the trailing edge, along with the rear bulkhead, [[empennage]], and un-pressurised fuselage are made of CFRP.<ref> ...

.../p/100029357 |oclc=321177421 |quote=It is negligence as a matter of law to drive a motor vehicle at such a rate of speed that it cannot be stopped in time t ...r capable of being used, as a means of transportation on water.}}</ref> or vehicles<ref name="Revised Statutes 4233">{{cite web |url=http://uscode.house.gov/st ...

...ng and working environments in aerospace-related facilities, habitats, and vehicles. These environments include, but are not limited to: science platform aircr ...ten combined with a generator into a single unit known as an '''integrated drive generator''' ('''IDG'''). ...