Rating plate
A rating plate on a machine carries information about its operational limits. The plate frequently contains the names of the machine and its manufacturer, so the rating plate is often called a name plate (hence the term "nameplate capacity" for a generator), although many devices carry separate nameplates and rating plates.[1]
For an electric machine, the power rating is the number on its rating plate and corresponds to a maximum electric load it can carry. There is a distinction between the continuous rating (for generators, continuous maximum rating or CMR[2]), at which the machine can be operational without a time limit and short-term rating that can only be used for a specified amount of time.[3]
Generators
A typical electrical generator rating plate contains the following parameters:Template:Sfn
- power rating is specified in terms of apparent power (KVA or MVA), since the exact power factor will be determined by the external factors;Template:Sfn
- power factor (PF) is the nominal power factor for other ratings; usually PF = 0.8;Template:Sfn
- insulation class (B, F, H) for the primary coil. Typical value is F, although older generators might use class B;Template:Sfn
- type of enclosure (IP code);Template:Sfn
- rated voltage can be either line to line ("line voltage") or phase to neutral ("phase voltage");Template:Sfn
- rated current is derived from the rated power and voltage: ;Template:Sfn
- line frequency (50 Hz or 60 Hz) and rotational speed of the prime mover in RPM;Template:Sfn
- connection (star or delta).