Normalized frequency (signal processing)

In digital signal processing (DSP), a normalized frequency is a ratio of a variable frequency ($f$) and a constant frequency associated with a system (such as a sampling rate, $f_s$). Some software applications require normalized inputs and produce normalized outputs, which can be re-scaled to physical units when necessary. Mathematical derivations are usually done in normalized units, relevant to a wide range of applications.

Examples of normalization

A typical choice of characteristic frequency is the sampling rate ($f_s$) that is used to create the digital signal from a continuous one. The normalized quantity, $f^{\prime }=\frac{f}{f_s},$ has the unit cycle per sample regardless of whether the original signal is a function of time or distance. For example, when $f$ is expressed in Hz (cycles per second), $f_s$ is expressed in samples per second.

Some programs (such as MATLAB toolboxes) that design filters with real-valued coefficients prefer the Nyquist frequency $(f_s/2)$ as the frequency reference, which changes the numeric range that represents frequencies of interest from $[0,\frac{1}{2}]$ cycle/sample to $[0,1]$ half-cycle/sample. Therefore, the normalized frequency unit is important when converting normalized results into physical units.

Example of plotting samples of a frequency distribution in the unit "bins", which are integer values. A scale factor of 0.7812 converts a bin number into the corresponding physical unit (hertz).

A common practice is to sample the frequency spectrum of the sampled data at frequency intervals of $\frac{f_s}{N},$ for some arbitrary integer $N$ (see Template:Slink). The samples (sometimes called frequency bins) are numbered consecutively, corresponding to a frequency normalization by $\frac{f_s}{N}.$Template:Rp The normalized Nyquist frequency is $\frac{N}{2}$ with the unit Template:Sfrac^th cycle/sample.

Angular frequency, denoted by $\omega$ and with the unit radians per second, can be similarly normalized. When $\omega$ is normalized with reference to the sampling rate as ${\omega }^{\prime }=\frac{\omega }{f_s},$ the normalized Nyquist angular frequency is Template:Nowrap.

The following table shows examples of normalized frequency for $f=1$ kHz, $f_s=44100$ samples/second (often denoted by 44.1 kHz), and 4 normalization conventions:

Quantity	Numeric range	Calculation	Reverse
$f^{\prime }=\frac{f}{f_s}$	Template:Math0, Template:SfracTemplate:Math cycle/sample	1000 / 44100 = 0.02268	$f=f^{\prime }\cdot f_s$
$f^{\prime }=\frac{f}{f_s/2}$	[0, 1] half-cycle/sample	1000 / 22050 = 0.04535	$f=f^{\prime }\cdot \frac{f_s}{2}$
$f^{\prime }=\frac{f}{f_s/N}$	Template:Math0, Template:SfracTemplate:Math bins	1000 × Template:Mvar / 44100 = 0.02268 Template:Mvar	$f=f^{\prime }\cdot \frac{f_s}{N}$
${\omega }^{\prime }=\frac{\omega }{f_s}$	[0, π] radians/sample	1000 × 2π / 44100 = 0.14250	$\omega ={\omega }^{\prime }\cdot f_s$

See also

• Prototype filter