List of optics equations

From testwiki
Jump to navigation Jump to search

Template:Short description This article summarizes equations used in optics, including geometric optics, physical optics, radiometry, diffraction, and interferometry.

Definitions

Geometric optics (luminal rays)

Template:Main

General fundamental quantities

Quantity (common name/s) (Common) symbol/s SI units Dimension
Object distance x, s, d, u, x1, s1, d1, u1 m [L]
Image distance x', s', d', v, x2, s2, d2, v2 m [L]
Object height y, h, y1, h1 m [L]
Image height y', h', H, y2, h2, H2 m [L]
Angle subtended by object θ, θo, θ1 rad dimensionless
Angle subtended by image θ', θi, θ2 rad dimensionless
Curvature radius of lens/mirror r, R m [L]
Focal length f m [L]
Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
Lens power P P=1/f m−1 = D (dioptre) [L]−1
Lateral magnification m m=x2/x1=y2/y1 dimensionless dimensionless
Angular magnification m m=θ2/θ1 dimensionless dimensionless

Physical optics (EM luminal waves)

Template:Main

There are different forms of the Poynting vector, the most common are in terms of the E and B or E and H fields.

Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
Poynting vector S, N 𝐍=1μ0𝐄×𝐁=𝐄×𝐇 W m−2 [M][T]−3
Poynting flux, EM field power flow ΦS, ΦN ΦN=S𝐍d𝐒 W [M][L]2[T]−3
RMS Electric field of Light Erms Erms=E2=E/2 N C−1 = V m−1 [M][L][T]−3[I]−1
Radiation momentum p, pEM, pr pEM=U/c J s m−1 [M][L][T]−1
Radiation pressure Pr, pr, PEM PEM=I/c=pEM/At W m−2 [M][T]−3

Radiometry

Template:Main

Visulization of flux through differential area and solid angle. As always 𝐧^ is the unit normal to the incident surface A, d𝐀=𝐧^dA, and 𝐞^ is a unit vector in the direction of incident flux on the area element, θ is the angle between them. The factor 𝐧^𝐞^dA=𝐞^d𝐀=cosθdA arises when the flux is not normal to the surface element, so the area normal to the flux is reduced.

For spectral quantities two definitions are in use to refer to the same quantity, in terms of frequency or wavelength.

Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
Radiant energy Q, E, Qe, Ee J [M][L]2[T]−2
Radiant exposure He He=dQ/(𝐞^d𝐀) J m−2 [M][T]−3
Radiant energy density ωe ωe=dQ/dV J m−3 [M][L]−3
Radiant flux, radiant power Φ, Φe Q=Φdt W [M][L]2[T]−3
Radiant intensity I, Ie Φ=IdΩ W sr−1 [M][L]2[T]−3
Radiance, intensity L, Le Φ=L(𝐞^d𝐀)dΩ W sr−1 m−2 [M][T]−3
Irradiance E, I, Ee, Ie Φ=E(𝐞^d𝐀) W m−2 [M][T]−3
Radiant exitance, radiant emittance M, Me Φ=M(𝐞^d𝐀) W m−2 [M][T]−3
Radiosity J, Jν, Je, J J=E+M W m−2 [M][T]−3
Spectral radiant flux, spectral radiant power Φλ, Φν, Φ, Φ Q=Φλdλdt

Q=Φνdνdt

W m−1 (Φλ)
W Hz−1 = J (Φν)
[M][L]−3[T]−3 (Φλ)
[M][L]−2[T]−2 (Φν)
Spectral radiant intensity Iλ, Iν, I, I Φ=IλdλdΩ

Φ=IνdνdΩ

W sr−1 m−1 (Iλ)
W sr−1 Hz−1 (Iν)
[M][L]−3[T]−3 (Iλ)
[M][L]2[T]−2 (Iν)
Spectral radiance Lλ, Lν, L, L Φ=Lλdλ(𝐞^d𝐀)dΩ

Φ=Lνdν(𝐞^d𝐀)dΩ

W sr−1 m−3 (Lλ)
W sr−1 m−2 Hz−1 (Lν)
[M][L]−1[T]−3 (Lλ)
[M][L]−2[T]−2 (Lν)
Spectral irradiance Eλ, Eν, E, E Φ=Eλdλ(𝐞^d𝐀)

Φ=Eνdν(𝐞^d𝐀)

W m−3 (Eλ)
W m−2 Hz−1 (Eν)
[M][L]−1[T]−3 (Eλ)
[M][L]−2[T]−2 (Eν)

Equations

Luminal electromagnetic waves

Physical situation Nomenclature Equations
Energy density in an EM wave u = mean energy density For a dielectric:
u=12(ε𝐄2+𝐁2μ)
Kinetic and potential momenta (non-standard terms in use) Potential momentum:

𝐩p=q𝐀

Kinetic momentum: 𝐩k=m𝐯

Canonical momentum: 𝐩=m𝐯+q𝐀

Irradiance, light intensity Template:Plainlist

Template:Endplainlist

I=𝐒=Erms2/cμ0

At a spherical surface: I=P0Ω|r|2

Doppler effect for light (relativistic) λ=λ0cvc+v

v=|Δλ|c/λ0

Cherenkov radiation, cone angle Template:Plainlist

Template:Endplainlist

cosθ=cnv=1vεμ
Electric and magnetic amplitudes Template:Plainlist
  • E = electric field
  • H = magnetic field strength

Template:Endplainlist

For a dielectric

|𝐄|=εμ|𝐇|

EM wave components Electric

𝐄=𝐄0sin(kxωt)

Magnetic

𝐁=𝐁0sin(kxωt)

Geometric optics

Physical situation Nomenclature Equations
Critical angle (optics) Template:Plainlist
  • n1 = refractive index of initial medium
  • n2 = refractive index of final medium
  • θc = critical angle

Template:Endplainlist

sinθc=n2n1
Thin lens equation Template:Plainlist
  • f = lens focal length
  • x1 = object distance
  • x2 = image distance
  • r1 = incident curvature radius
  • r2 = refracted curvature radius

Template:Endplainlist

1x1+1x2=1f

Lens focal length from refraction indices
1f=(nlensnmed1)(1r11r2)

Image distance in a plane mirror x2=x1
Spherical mirror r = curvature radius of mirror Spherical mirror equation

1x1+1x2=1f=2r

Image distance in a spherical mirror n1x1+n2x2=(n2n1)r

Subscripts 1 and 2 refer to initial and final optical media respectively.

These ratios are sometimes also used, following simply from other definitions of refractive index, wave phase velocity, and the luminal speed equation:

n1n2=v2v1=λ2λ1=ε1μ1ε2μ2

where:Template:Plainlist

Template:Endplainlist

Polarization

Physical situation Nomenclature Equations
Angle of total polarisation θB = Reflective polarization angle, Brewster's angle tanθB=n2/n1
intensity from polarized light, Malus's law Template:Plainlist
  • I0 = Initial intensity,
  • I = Transmitted intensity,
  • θ = Polarization angle between polarizer transmission axes and electric field vector

Template:Endplainlist

I=I0cos2θ

Diffraction and interference

Property or effect Nomenclature Equation
Thin film in air Template:Plainlist
  • n1 = refractive index of initial medium (before film interference)
  • n2 = refractive index of final medium (after film interference)

Template:Endplainlist

Template:Plainlist
  • Min: Nλ/n2
  • Max:2L=(N+1/2)λ/n2

Template:Endplainlist

The grating equation Template:Plainlist
  • a = width of aperture, slit width
  • α = incident angle to the normal of the grating plane

Template:Endplainlist

δ2πλ=a(sinθ+sinα)
Rayleigh's criterion θR=1.22λ/d
Bragg's law (solid state diffraction) Template:Plainlist
  • d = lattice spacing
  • δ = phase difference between two waves

Template:Endplainlist

δ2πλ=2dsinθ

Template:Plainlist

  • For constructive interference: δ/2π=n
  • For destructive interference: δ/2π=n/2

Template:Endplainlist

where n𝐍

Single slit diffraction intensity Template:Plainlist
  • I0 = source intensity
  • Wave phase through apertures

ϕ=2πaλsinθ Template:Endplainlist

I=I0[sin(ϕ/2)(ϕ/2)]2
N-slit diffraction (N ≥ 2) Template:Plainlist
  • d = centre-to-centre separation of slits
  • N = number of slits
  • Phase between N waves emerging from each slit

δ=2πdλsinθ Template:Endplainlist

I=I0[sin(Nδ/2)sin(δ/2)]2
N-slit diffraction (all N) I=I0[sin(ϕ/2)(ϕ/2)sin(Nδ/2)sin(δ/2)]2
Circular aperture intensity Template:Plainlist

Template:Endplainlist

I=I0(2J1(kasinθ)kasinθ)2
Amplitude for a general planar aperture Cartesian and spherical polar coordinates are used, xy plane contains aperture

Template:Plainlist

  • A, amplitude at position r
  • r' = source point in the aperture
  • Einc, magnitude of incident electric field at aperture

Template:Endplainlist

Near-field (Fresnel)

A(𝐫)apertureEinc(𝐫)eik|𝐫𝐫|4π|𝐫𝐫|dxdy

Far-field (Fraunhofer) A(𝐫)eikr4πrapertureEinc(𝐫)eik[sinθ(cosϕx+sinϕy)]dxdy

Huygens–Fresnel–Kirchhoff principle Template:Plainlist
  • r0 = position from source to aperture, incident on it
  • r = position from aperture diffracted from it to a point
  • α0 = incident angle with respect to the normal, from source to aperture
  • α = diffracted angle, from aperture to a point
  • S = imaginary surface bounded by aperture
  • 𝐧^ = unit normal vector to the aperture
  • 𝐫0𝐧^=|𝐫0|cosα0
  • 𝐫𝐧^=|𝐫|cosα
  • |𝐫||𝐫0|λ

Template:Endplainlist

A(𝐫)=i2λapertureei𝐤(𝐫+𝐫0)|𝐫||𝐫0|[cosα0cosα]dS
Kirchhoff's diffraction formula A(𝐫)=14πapertureei𝐤𝐫0|𝐫0|[i|𝐤|U0(𝐫0)cosα+A0(𝐫0)n]dS

Astrophysics definitions

In astrophysics, L is used for luminosity (energy per unit time, equivalent to power) and F is used for energy flux (energy per unit time per unit area, equivalent to intensity in terms of area, not solid angle). They are not new quantities, simply different names.

Quantity (common name/s) (Common) symbol/s Defining equation SI units Dimension
Comoving transverse distance DM pc (parsecs) [L]
Luminosity distance DL DL=L4πF pc (parsecs) [L]
Apparent magnitude in band j (UV, visible and IR parts of EM spectrum) (Bolometric) m mj=52log10|FjFj0| dimensionless dimensionless
Absolute magnitude

(Bolometric)

M M=m5[(log10DL)1] dimensionless dimensionless
Distance modulus μ μ=mM dimensionless dimensionless
Colour indices (No standard symbols) UB=MUMB

BV=MBMV

dimensionless dimensionless
Bolometric correction Cbol (No standard symbol) Cbol=mbolV=MbolMV dimensionless dimensionless

See also

Sources

Further reading