Force-sensing capacitor

Template:Short description A force-sensing capacitor is a material whose capacitance changes when a force, pressure or mechanical stress is applied. They are also known as "force-sensitive capacitors". They can provide improved sensitivity and repeatability compared to force-sensitive resistors but traditionally required more complicated electronics.

Operation principle

Typical force-sensitive capacitors are examples of parallel plate capacitors. For small deflections, there is a linear relationship between applied force and change in capacitance, which can be shown as follows:

The capacitance, $C$, equals $\epsilon A/d$, where $\epsilon$ is permeability, $A$ is the area of the sensor and $d$ is the distance between parallel plates. If the material is linearly elastic (so follows Hooks Law), then the displacement, due to an applied force $F$, is $x=F/k$, where $k$ is the spring constant. Combining these equations gives the capacitance after an applied force as:

$C=\epsilon A/(d_{nominal}-F/k)$, where $d_{nominal}$ is the separation between parallel plates when no force is applied.

This can be rearranged to:

$C=(\epsilon A{d}_{nominal}+\epsilon AF/k)/(d_{nominal}^2-F^2/k^2)$

Assuming that $d_{nominal}^2>>F^2/k^2$, which is true for small deformations where $d_{nominal}>>x$, we can simplify this to:

C $\simeq (\epsilon A{d}_{nominal}+\epsilon AF/k)/(d_{nominal}^2)$

It follows that:

C $\simeq C_{nominal}+\epsilon AF/k{d}_{nominal}^2$

C $\simeq C_{nominal}+BF$ where $B=ϵA/k{d}^2$, which is constant for a given sensor.

We can express the change in capacitance $\mathrm{\Delta }C$ as:

$\mathrm{\Delta }C=BF$

Production

SingleTact makes force-sensitive capacitors using moulded silicon between two layers of polyimide to construct a 0.35Template:Nbspmm thick sensor, with force ranges from 1Template:NbspN to 450Template:NbspN. The 8mm SingleTact has a nominal capacitance of 75Template:NbsppF, which increases by 2.2Template:NbsppF when the rated force is applied. It can be mounted on many surfaces for direct force measurement.

Uses

Force-sensing capacitors can be used to create low-profile force-sensitive buttons. They have been used in medical imaging to map pressures in the esophagus and to image breast and prostate cancer.