Einstein coefficients

From testwiki
Jump to navigation Jump to search

Template:Short description

Emission lines and absorption lines compared to a continuous spectrum

In atomic, molecular, and optical physics, the Einstein coefficients are quantities describing the probability of absorption or emission of a photon by an atom or molecule.[1] The Einstein A coefficients are related to the rate of spontaneous emission of light, and the Einstein B coefficients are related to the absorption and stimulated emission of light. Throughout this article, "light" refers to any electromagnetic radiation, not necessarily in the visible spectrum.

These coefficients are named after Albert Einstein, who proposed them in 1916.

History

In the 19th century there were many measurements of the amount of light absorbed by a various gases as the incoming light frequency was varied, called absorption spectra, and measurements of the light emitted from gases energized by, for example flames, called emission spectra. To the end of that century it was believed that these spectra were caused by vibrations of atoms. In 1907 Arthur William Conway proposed instead that a change in the electron state of a single electron creates a single line. Then the many characteristic lines in the spectra resulted from many atoms with electrons in a variety of different states.[2]Template:Rp

Better models for the atom appeared after Ernest Rutherford showed that they contained a concentrated atomic nucleus surrounded by electrons. John William Nicholson proposed in 1911 that the characteristic lines represented transitions of electrons limited to discrete changes in angular momentum. Then in 1913, Niels Bohr developed a complete model for quantized transitions between electron energy levels that substantially reproduced the atomic spectral line observations.[2]Template:Rp

In Bohr's model a photon with an energy equal to the difference Template:Math between two energy levels is released or absorbed by an atom. The frequency Template:Math at which the spectral line occurs is related to the photon energy by Bohr's frequency condition Template:Math where Template:Math denotes the Planck constant.[3] Bohr's theory related the states of atoms to the energy of the characteristic lines, but it said nothing about why some lines are strong and others weak.

Albert Einstein introduced the coefficients in 1916 and 1917 in a series of papers outlining his quantum theory of radiation interacting with matter.[4][5]Template:Rp[6][7] Einstein adopted one quantum assumption from Bohr's model of the atoms, that they exist in stationary states. Each state has an energy. Einstein treats the interaction between these atoms and a radiation field using Max Planck's classical oscillator, in effect replacing the non-specific oscillators of Planck's law with Bohr atoms. The relative phase of an oscillator and electromagnetic field determines the direction energy flows during the interaction. The probability of interaction is proportional to the spectral flux density of the electromagnetic field, ρ(ν,T). Assuming just two energy levels, Eb>Ea, absorption corresponds to a→b with proportionality constant, Bab, and emission corresponds to b→a with proportionality constant, Bba. This type of emission came to be called stimulated emission. Einstein adds a third constant, Aba, independent of the flux density, corresponding to spontaneous emission in the absence of the field.[8][9]Template:Rp

Paul Dirac derived the coefficients in a 1927 paper titled "The Quantum Theory of the Emission and Absorption of Radiation".[10][11]

Emission and absorption coefficients

Spontaneous emission

Template:Main

Schematic diagram of atomic spontaneous emission

Spontaneous emission is the process by which an electron "spontaneously" (i.e., without any outside influence) decays from a higher energy level to a lower one. The process is described by the Einstein coefficient A21 (s−1), which gives the probability per unit time that an electron in state 2 with energy E2 will decay spontaneously to state 1 with energy E1, emitting a photon with an energy Template:Math. Due to the energy-time uncertainty principle, the transition actually produces photons within a narrow range of frequencies called the spectral linewidth. If ni is the volumetric number density of atoms in state i, then the change in the number density of atoms in state 2 per unit time due to spontaneous emission will be (dn2dt)spontaneous=−A21n2.

The same process results in an increase in the population of state 1: (dn1dt)spontaneous=A21n2.

Stimulated emission

Template:Main

Schematic diagram of atomic stimulated emission

Stimulated emission (also known as induced emission) is the process by which an electron is induced to jump from a higher energy level to a lower one by the presence of electromagnetic radiation at (or near) the frequency of the transition. From the thermodynamic viewpoint, this process must be regarded as negative absorption. The process is described by the Einstein coefficient B21 (m3 J−1 s−2), which gives the probability per unit time per unit energy density of the radiation field per unit frequency that an electron in state 2 with energy E2 will decay to state 1 with energy E1, emitting a photon with an energy Template:Math. The change in the number density of atoms in state 1 per unit time due to induced emission will be (dn1dt)neg. absorb.=B21n2ρ(ν), where ρ(ν) denotes the spectral energy density of the isotropic radiation field at the frequency of the transition (see Planck's law).

Stimulated emission is one of the fundamental processes that led to the development of the laser. Laser radiation is, however, very far from the present case of isotropic radiation.

Absorption

Template:Main

Schematic diagram of atomic absorption

Absorption is the process by which a photon is absorbed by the atom, causing an electron to jump from a lower energy level to a higher one. The process is described by the Einstein coefficient B12 (m3 J−1 s−2), which gives the probability per unit time per unit energy density of the radiation field per unit frequency that an electron in state 1 with energy E1 will absorb a photon with an energy Template:Math and jump to state 2 with energy E2. The change in the number density of atoms in state 1 per unit time due to absorption will be (dn1dt)pos. absorb.=−B12n1ρ(ν).

Units

Different authors use different units for frequency-dependent quantities. In particular, the spectral energy density can be expressed per unit of frequency, angular frequency, energy (e.g., electronvolt), or wavelength. Consequently, the B12 and B21 coefficients will have different units. This is sometimes indicated (e.g., B21ω), but more often silently omitted. The A21 coefficient remains in the units of 1/time.[1]

Detailed balance

The Einstein coefficients are fixed probabilities per time associated with each atom, and do not depend on the state of the gas of which the atoms are a part. Therefore, any relationship that we can derive between the coefficients at, say, thermodynamic equilibrium will be valid universally.

At thermodynamic equilibrium, we will have a simple balancing, in which the net change in the number of any excited atoms is zero, being balanced by loss and gain due to all processes. With respect to bound-bound transitions, we will have detailed balancing as well, which states that the net exchange between any two levels will be balanced. This is because the probabilities of transition cannot be affected by the presence or absence of other excited atoms. Detailed balance (valid only at equilibrium) requires that the change in time of the number of atoms in level 1 due to the above three processes be zero: 0=A21n2+B21n2ρ(ν)−B12n1ρ(ν).

Along with detailed balancing, at temperature Template:Math we may use our knowledge of the equilibrium energy distribution of the atoms, as stated in the Maxwell–Boltzmann distribution, and the equilibrium distribution of the photons, as stated in Planck's law of black body radiation to derive universal relationships between the Einstein coefficients.

From Boltzmann distribution we have for the number of excited atomic species i: nin=gie−Ei/kTZ, where n is the total number density of the atomic species, excited and unexcited, k is the Boltzmann constant, T is the temperature, gi is the degeneracy (also called the multiplicity) of state i, and Z is the partition function. From Planck's law of black-body radiation at temperature Template:Math we have for the spectral radiance (radiance is energy per unit time per unit solid angle per unit projected area, when integrated over an appropriate spectral interval)[12] at frequency Template:Math ρν(ν,T)=F(ν)1ehν/kT−1, where[13] F(ν)=2hν3c2, where c is the speed of light and h is the Planck constant.

Substituting these expressions into the equation of detailed balancing and remembering that Template:Math yields A21g2e−hν/kT+B21g2e−hν/kTF(ν)ehν/kT−1=B12g1F(ν)ehν/kT−1, or A21g2(1−e−hν/kT)+B21g2F(ν)e−hν/kT=B12g1F(ν).

The above equation must hold at any temperature, so from T→∞ one gets B21g2=B12g1, and from T→0 A21g2=B21g2F(ν).

Therefore, the three Einstein coefficients are interrelated by A21B21=F(ν) and B21B12=g1g2.

When this relation is inserted into the original equation, one can also find a relation between A21 and B12, involving Planck's law.

Oscillator strengths

The oscillator strength f12 is defined by the following relation to the cross section σ for absorption:[1] σ=e24ε0mecf12ϕν=πe22ε0mecf12ϕω,

where e is the electron charge, me is the electron mass, and ϕν and ϕω are normalized distribution functions in frequency and angular frequency respectively. This allows all three Einstein coefficients to be expressed in terms of the single oscillator strength associated with the particular atomic spectral line: B12=e24ε0mehνf12,B21=e24ε0mehνg1g2f12,A21=2πν2e2ε0mec3g1g2f12.

Dipole approximation

The value of A and B coefficients can be calculated using quantum mechanics where dipole approximations in time dependent perturbation theory is used. While the calculation of B coefficient can be done easily, that of A coefficient requires using results of second quantization. This is because the theory developed by dipole approximation and time dependent perturbation theory gives a semiclassical description of electronic transition which goes to zero as perturbing fields go to zero. The A coefficient which governs spontaneous emission should not go to zero as perturbing fields go to zero. The result for transition rates of different electronic levels as a result of spontaneous emission is given as (in SI units):[14][1][15] wi→fs.emi=ωif3e23πε0ℏc3|⟨f|r→|i⟩|2=Aif

For B coefficient, straightforward application of dipole approximation in time dependent perturbation theory yields (in SI units):[16][15] wi→fabs=u(ωfi)πe23ε0ℏ2|⟨f|r→|i⟩|2=Bifabsu(ωfi) wi→femi=u(ωif)πe23ε0ℏ2|⟨f|r→|i⟩|2=Bifemiu(ωif)

Note that the rate of transition formula depends on dipole moment operator. For higher order approximations, it involves quadrupole moment and other similar terms.

Here, the B coefficients are chosen to correspond to ω energy distribution function. Often these different definitions of B coefficients are distinguished by superscript, for example, B21f=B21ω2π where B21f term corresponds to frequency distribution and B21ω term corresponds to ω distribution.[1] The formulas for B coefficients varies inversely to that of the energy distribution chosen, so that the transition rate is same regardless of convention.

Hence, AB coefficients are calculated using dipole approximation as: Aab=ωab3e23πε0ℏc3|⟨a|r→|b⟩|2Bab=πe23ε0ℏ2|⟨a|r→|b⟩|2 where ωab=Ea−Ebℏ and B coefficients correspond to ω energy distribution function.

Hence the following ratios are also derived: B12B21=1 and AifB=ωif3ℏπ2c3

Derivation of Planck's law

It follows from theory that:[15] dNbdt=−AbaNb−Nbu(ωba)Bba+Nau(ωba)Bab=−Nbwb→as.emi−Nbwb→aemi+Nawa→babs where Na and Nb are number of occupied energy levels of Ea and Eb respectively, where Eb>Ea. Note that from time dependent perturbation theory application, the fact that only radiation whose ω is close to value of ωba can produce respective stimulated emission or absorption, is used.

Where Maxwell distribution involving Na and Nb ensures NaNb=e−Eaβe−Ebβ=eωbaℏβ

Solving for u for equilibrium condition dNbdt=0 using the above equations and ratios while generalizing ωba to ω, we get: uω(ω,T)=ω3ℏπ2c31eωℏβ−1 which is the angular frequency energy distribution from Planck's law.[15]

See also

Template:Div col

Template:Div col end

References

Template:Reflist

Further reading

Template:Refbegin

Template:Refend

Template:Albert Einstein

bg:Атомна спектрална линия it:Linea spettrale atomica pl:Widmo liniowe zh:原子谱线#爱因斯坦系数

  1. ↑ 1.0 1.1 1.2 1.3 1.4 Template:Cite arXiv; a revised version of Template:Cite journal
  2. ↑ 2.0 2.1 Template:Cite book
  3. ↑ Template:Cite book
  4. ↑ Template:Cite journal Translated in Template:Cite book
  5. ↑ Template:Cite book
  6. ↑ Template:Cite journal
  7. ↑ Template:Cite journal Translated in Template:Cite book Also in Boorse, H. A., Motz, L. (1966). The world of the atom, edited with commentaries, Basic Books, Inc., New York, pp. 888–901.
  8. ↑ Template:Cite journal
  9. ↑ Template:Cite book
  10. ↑ Template:Cite journal
  11. ↑ Template:Cite book
  12. ↑ Robert W. Boyd, Radiometry and the Detection of Optical Radiation, John Wiley and Sons, 1983
  13. ↑ Template:Cite book
  14. ↑ Template:Cite book
  15. ↑ 15.0 15.1 15.2 15.3 Template:Cite web
  16. ↑ Template:Cite web