Arc diagram
Template:Short description Template:CS1 config

An arc diagram is a style of graph drawing, in which the vertices of a graph are placed along a line in the Euclidean plane, with edges being drawn as semicircles in one or both of the two halfplanes bounded by the line, or as smooth curves formed by sequences of semicircles. In some cases, line segments of the line itself are also allowed as edges, as long as they connect only vertices that are consecutive along the line. Variations of this drawing style in which the semicircles are replaced by convex curves of some other type are also commonly called arc diagrams.Template:Sfnp
Arc diagrams are also called linear embeddings.Template:Sfnp Within the framework of circuit topology of knots and tangles, they are termed as circuit diagrams.Template:Sfnp Template:Harvtxt write that arc diagrams "may not convey the overall structure of the graph as effectively as a two-dimensional layout", but that their layout makes it easy to display multivariate data associated with the vertices of the graph.Template:Sfnp Applications of arc diagrams include the Farey diagram, a visualization of number-theoretic connections between rational numbers, and diagrams representing RNA secondary structure in which the crossings of the diagram represent pseudoknots in the structure.
History
The use of the phrase "arc diagram" for this kind of drawing follows the use of a similar type of diagram by Template:Harvtxt to visualize the repetition patterns in strings, by using arcs to connect pairs of equal substrings. However, this style of graph drawing is much older than its name, dating back to the work of Template:Harvtxt and Template:Harvtxt, who used arc diagrams to study crossing numbers of graphs.[1]
Planar graphs
As Template:Harvtxt observed, every drawing of a graph in the plane may be deformed into an arc diagram, without changing its number of crossings. In particular, every planar graph has a planar arc diagram. However, this embedding may need to use more than one semicircle for some of its edges.Template:Sfnp
If a graph is drawn without crossings using an arc diagram in which each edge is a single semicircle, then the drawing is a two-page book embedding. This kind of drawing is only possible for the subhamiltonian graphs, a proper subset of the planar graphs.[2] For instance, a maximal planar graph has such an embedding if and only if it contains a Hamiltonian cycle. Therefore, a non-Hamiltonian maximal planar graph such as the Goldner–Harary graph cannot have a planar embedding with one semicircle per edge.[3] Testing whether a given graph has a crossing-free arc diagram of this type (or equivalently, whether it has pagenumber two) is NP-complete.Template:Sfnp
However, every planar graph has an arc diagram in which each edge is drawn as a biarc with at most two semicircles. More strongly, every st-planar directed graph (a planar directed acyclic graph with a single source and a single sink, both on the outer face) has an arc diagram in which every edge forms a monotonic curve, with these curves all consistently oriented from one end of the vertex line towards the other.Template:Sfnp For undirected planar graphs, one way to construct an arc diagram with at most two semicircles per edge is to subdivide the graph and add extra edges so that the resulting graph has a Hamiltonian cycle (and so that each edge is subdivided at most once), and to use the ordering of the vertices on the Hamiltonian cycle as the ordering along the line.Template:Sfnp In a planar graph with vertices, at most biarcs are needed.Template:Sfnp
Minimizing crossings
Because it is NP-complete to test whether a given graph has an arc diagram with one semicircle per edge and no crossings, it is also NP-hard to find an arc diagram of this type that minimizes the number of crossings. This crossing minimization problem remains NP-hard, for non-planar graphs, even if the ordering of the vertices along the line is fixed.Template:Sfnp However, in the fixed-ordering case, an embedding without crossings (if one exists) may be found in polynomial time by translating the problem into a 2-satisfiability problem, in which the variables represent the placement of each arc and the constraints prevent crossing arcs from being placed on the same side of the vertex line.Template:Sfnp Additionally, in the fixed-ordering case, a crossing-minimizing embedding may be approximated by solving a maximum cut problem in an auxiliary graph that represents the semicircles and their potential crossings (or equivalently, by approximating the MAX2SAT version of the 2-satisfiability instance).Template:Sfnp
Template:Harvtxt, Template:Harvtxt, and Template:Harvtxt discuss heuristics for finding arc diagrams with few crossings.
Clockwise orientation
For drawings of directed graphs, a common convention is to draw each arc in a clockwise direction, so that arcs that are directed from an earlier to a later vertex in the sequence are drawn above the vertex line, and arcs directed from a later to an earlier vertex are drawn below the line.[4]
Applications

The Farey diagram of a set of rational numbers is a structure that may be represented geometrically as an arc diagram. In this form it has a vertex for each number, placed on the number line, and a semicircular edge above the line connecting pairs of numbers and (in simplest terms) for which . The semicircles of the diagram may be thought of as lines in the Poincaré half-plane model of the hyperbolic plane, with the vertices placed at infinite points on the boundary line of this model. The Poincaré half-plane model has an infinite point that is not represented as point on the boundary line, the shared endpoint of all vertical rays in the model, and this may be represented by the "fraction" 1/0 (undefined as a number), with the same rule for determining its adjacencies. The Farey diagram of any set of rational numbers is a planar graph, and the Farey diagram of the set of all rational numbers forms a tessellation of the hyperbolic plane by ideal triangles.Template:Sfnp
Arc diagrams or circuit diagrams are commonly used in studying folded biopolymers such as proteins and nucleic acids (DNAs, RNAs). Biopolymers are typically represented by their primary monomer sequence along the line of the diagrams, and with arcs above the line representing bonds between monomers (e.g., amino acids in proteins or bases in RNA or DNA) that are adjacent in the physical structure of the polymer despite being nonadjacent in the sequence order. The theoretical framework of circuit topology is then typically applied to extract local and global topological information, which can in turn be related to biological function of the folded molecules.Template:Sfnp When arcs do not cross, the arrangement of the two arcs will be either parallel (P) or series (S). When there are crossings, the crossings represent what is often called as X arrangement in circuit topology. The statistics of P, S, and X can be used to learn about folding kinetics of these polymers.Template:Sfnp
Arc diagrams were used by Template:Harvtxt to visualize the state diagram of a shift register,Template:Sfnp by Template:Harvtxt to show that the crossing number of every graph is lower-bounded by a combination of its cutwidth and vertex degrees,Template:Sfnp by Template:Harvtxt to visualize interactions between Bluetooth devices,Template:Sfnp and by Template:Harvtxt to visualize the yardage of plays in a game of American football.Template:Sfnp Additional applications of this visualization technique are surveyed by Template:Harvtxt.Template:Sfnp
Notes
References
- Template:Citation.
- Template:Citation
- Template:Citation.
- Template:Citation.
- Template:Citation.
- Template:Citation
- Template:Citation.
- Template:Citation.
- Template:Citation.
- Template:Citation.
- Template:Citation.
- Template:Citation.
- Template:Citation.
- Template:Citation; see Section 2.4, "Farey diagrams and continued fractions"
- Template:Citation.
- Template:Citation. See also the same journal 6(2):33 (1975) and 8:104-106 (1977). Reference from listing of Harary's publications.
- Template:Citation.
- Template:Citation.
- Template:Citation.
- Template:Citation.
- Template:Citation
- Template:Citation.
- Template:Citation.
- Template:Citation
- Template:Citation.
- Template:Citation
- Template:Citation.
- Template:Citation.
- Template:Citation.
- ↑ Template:Harvtxt; Template:Harvtxt.
- ↑ The application of semicircles to edge layout in book embeddings was already made by Template:Harvtxt, but the explicit connection of arc diagrams with two-page book embeddings seems to be due to Template:Harvtxt.
- ↑ As Template:Harvtxt show, this is the smallest non-Hamiltonian maximal planar graph. The implication that it has no two-page book embedding is stated by Template:Harvtxt.
- ↑ This clockwise orientation convention was developed as part of a different graph drawing style by Template:Harvtxt, and applied to arc diagrams by Template:Harvtxt.