Einstein coefficients

From testwiki
Revision as of 20:19, 23 January 2025 by imported>Sbrozell0 (Spontaneous emission: tweaked prepositions.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Template:Short description

Emission lines and absorption lines compared to a continuous spectrum

In atomic, molecular, and optical physics, the Einstein coefficients are quantities describing the probability of absorption or emission of a photon by an atom or molecule.[1] The Einstein A coefficients are related to the rate of spontaneous emission of light, and the Einstein B coefficients are related to the absorption and stimulated emission of light. Throughout this article, "light" refers to any electromagnetic radiation, not necessarily in the visible spectrum.

These coefficients are named after Albert Einstein, who proposed them in 1916.

Spectral lines

In physics, one thinks of a spectral line from two viewpoints.

An emission line is formed when an atom or molecule makes a transition from a particular discrete energy level Template:Math of an atom, to a lower energy level Template:Math, emitting a photon of a particular energy and wavelength. A spectrum of many such photons will show an emission spike at the wavelength associated with these photons.

An absorption line is formed when an atom or molecule makes a transition from a lower, Template:Math, to a higher discrete energy state, Template:Math, with a photon being absorbed in the process. These absorbed photons generally come from background continuum radiation (the full spectrum of electromagnetic radiation) and a spectrum will show a drop in the continuum radiation at the wavelength associated with the absorbed photons.

The two states must be bound states in which the electron is bound to the atom or molecule, so the transition is sometimes referred to as a "bound–bound" transition, as opposed to a transition in which the electron is ejected out of the atom completely ("bound–free" transition) into a continuum state, leaving an ionized atom, and generating continuum radiation.

A photon with an energy equal to the difference Template:Math between the energy levels is released or absorbed in the process. The frequency Template:Math at which the spectral line occurs is related to the photon energy by Bohr's frequency condition Template:Math where Template:Math denotes the Planck constant.[2][3][4][5][6][7]

Emission and absorption coefficients

An atomic spectral line refers to emission and absorption events in a gas in which n2 is the density of atoms in the upper-energy state for the line, and n1 is the density of atoms in the lower-energy state for the line.

The emission of atomic line radiation at frequency Template:Math may be described by an emission coefficient ε with units of energy/(time × volume × solid angle). ε dt dV dΩ is then the energy emitted by a volume element dV in time dt into solid angle dΩ. For atomic line radiation, ε=hν4πn2A21, where A21 is the Einstein coefficient for spontaneous emission, which is fixed by the intrinsic properties of the relevant atom for the two relevant energy levels.

The absorption of atomic line radiation may be described by an absorption coefficient κ with units of 1/length. The expression κ' dx gives the fraction of intensity absorbed for a light beam at frequency Template:Math while traveling distance dx. The absorption coefficient is given by κ=hν4π(n1B12n2B21), where B12 and B21 are the Einstein coefficients for photon absorption and induced emission respectively. Like the coefficient A21, these are also fixed by the intrinsic properties of the relevant atom for the two relevant energy levels. For thermodynamics and for the application of Kirchhoff's law, it is necessary that the total absorption be expressed as the algebraic sum of two components, described respectively by B12 and B21, which may be regarded as positive and negative absorption, which are, respectively, the direct photon absorption, and what is commonly called stimulated or induced emission.[8][9][10]

The above equations have ignored the influence of the spectroscopic line shape. To be accurate, the above equations need to be multiplied by the (normalized) spectral line shape, in which case the units will change to include a 1/Hz term.

Under conditions of thermodynamic equilibrium, the number densities n2 and n1, the Einstein coefficients, and the spectral energy density provide sufficient information to determine the absorption and emission rates.

Equilibrium conditions

The number densities n2 and n1 are set by the physical state of the gas in which the spectral line occurs, including the local spectral radiance (or, in some presentations, the local spectral radiant energy density). When that state is either one of strict thermodynamic equilibrium, or one of so-called "local thermodynamic equilibrium",[11][12][13] then the distribution of atomic states of excitation (which includes n2 and n1) determines the rates of atomic emissions and absorptions to be such that Kirchhoff's law of equality of radiative absorptivity and emissivity holds. In strict thermodynamic equilibrium, the radiation field is said to be black-body radiation and is described by Planck's law. For local thermodynamic equilibrium, the radiation field does not have to be a black-body field, but the rate of interatomic collisions must vastly exceed the rates of absorption and emission of quanta of light, so that the interatomic collisions entirely dominate the distribution of states of atomic excitation. Circumstances occur in which local thermodynamic equilibrium does not prevail, because the strong radiative effects overwhelm the tendency to the Maxwell–Boltzmann distribution of molecular velocities. For example, in the atmosphere of the Sun, the great strength of the radiation dominates. In the upper atmosphere of the Earth, at altitudes over 100 km, the rarity of intermolecular collisions is decisive.

In the cases of thermodynamic equilibrium and of local thermodynamic equilibrium, the number densities of the atoms, both excited and unexcited, may be calculated from the Maxwell–Boltzmann distribution, but for other cases, (e.g. lasers) the calculation is more complicated.

Einstein coefficients

In 1916, Albert Einstein proposed that there are three processes occurring in the formation of an atomic spectral line. The three processes are referred to as spontaneous emission, stimulated emission, and absorption. With each is associated an Einstein coefficient, which is a measure of the probability of that particular process occurring. Einstein considered the case of isotropic radiation of frequency Template:Math and spectral energy density Template:Math.[3][14][15][16] Paul Dirac derived the coefficients in a 1927 paper titled "The Quantum Theory of the Emission and Absorption of Radiation".[17][18]

Various formulations

Hilborn has compared various formulations for derivations for the Einstein coefficients, by various authors.[19] For example, Herzberg works with irradiance and wavenumber;[20] Yariv works with energy per unit volume per unit frequency interval,[21] as is the case in the more recent (2008) [22] formulation. Mihalas & Weibel-Mihalas work with radiance and frequency,[13] as does Chandrasekhar,[23] and Goody & Yung;[24] Loudon uses angular frequency and radiance.[25]

Spontaneous emission

Template:Main article

Schematic diagram of atomic spontaneous emission

Spontaneous emission is the process by which an electron "spontaneously" (i.e. without any outside influence) decays from a higher energy level to a lower one. The process is described by the Einstein coefficient A21 (s−1), which gives the probability per unit time that an electron in state 2 with energy E2 will decay spontaneously to state 1 with energy E1, emitting a photon with an energy Template:Math. Due to the energy-time uncertainty principle, the transition actually produces photons within a narrow range of frequencies called the spectral linewidth. If ni is the number density of atoms in state i , then the change in the number density of atoms in state 2 per unit time due to spontaneous emission will be (dn2dt)spontaneous=A21n2.

The same process results in an increase in the population of state 1: (dn1dt)spontaneous=A21n2.

Stimulated emission

Template:Main article

Schematic diagram of atomic stimulated emission

Stimulated emission (also known as induced emission) is the process by which an electron is induced to jump from a higher energy level to a lower one by the presence of electromagnetic radiation at (or near) the frequency of the transition. From the thermodynamic viewpoint, this process must be regarded as negative absorption. The process is described by the Einstein coefficient B21 (m3 J−1 s−2), which gives the probability per unit time per unit energy density of the radiation field per unit frequency that an electron in state 2 with energy E2 will decay to state 1 with energy E1, emitting a photon with an energy Template:Math. The change in the number density of atoms in state 1 per unit time due to induced emission will be (dn1dt)neg. absorb.=B21n2ρ(ν), where ρ(ν) denotes the spectral energy density of the isotropic radiation field at the frequency of the transition (see Planck's law).

Stimulated emission is one of the fundamental processes that led to the development of the laser. Laser radiation is, however, very far from the present case of isotropic radiation.

Photon absorption

Template:Main article

Schematic diagram of atomic absorption

Absorption is the process by which a photon is absorbed by the atom, causing an electron to jump from a lower energy level to a higher one. The process is described by the Einstein coefficient B12 (m3 J−1 s−2), which gives the probability per unit time per unit energy density of the radiation field per unit frequency that an electron in state 1 with energy E1 will absorb a photon with an energy Template:Math and jump to state 2 with energy E2. The change in the number density of atoms in state 1 per unit time due to absorption will be (dn1dt)pos. absorb.=B12n1ρ(ν). Template:Clear

Detailed balancing

The Einstein coefficients are fixed probabilities per time associated with each atom, and do not depend on the state of the gas of which the atoms are a part. Therefore, any relationship that we can derive between the coefficients at, say, thermodynamic equilibrium will be valid universally.

At thermodynamic equilibrium, we will have a simple balancing, in which the net change in the number of any excited atoms is zero, being balanced by loss and gain due to all processes. With respect to bound-bound transitions, we will have detailed balancing as well, which states that the net exchange between any two levels will be balanced. This is because the probabilities of transition cannot be affected by the presence or absence of other excited atoms. Detailed balance (valid only at equilibrium) requires that the change in time of the number of atoms in level 1 due to the above three processes be zero: 0=A21n2+B21n2ρ(ν)B12n1ρ(ν).

Along with detailed balancing, at temperature Template:Math we may use our knowledge of the equilibrium energy distribution of the atoms, as stated in the Maxwell–Boltzmann distribution, and the equilibrium distribution of the photons, as stated in Planck's law of black body radiation to derive universal relationships between the Einstein coefficients.

From Boltzmann distribution we have for the number of excited atomic species i: nin=gieEi/kTZ, where n is the total number density of the atomic species, excited and unexcited, k is the Boltzmann constant, T is the temperature, gi is the degeneracy (also called the multiplicity) of state i, and Z is the partition function. From Planck's law of black-body radiation at temperature Template:Math we have for the spectral radiance (radiance is energy per unit time per unit solid angle per unit projected area, when integrated over an appropriate spectral interval)[26] at frequency Template:Math ρν(ν,T)=F(ν)1ehν/kT1, where[27] F(ν)=2hν3c2, where c is the speed of light and h is the Planck constant.

Substituting these expressions into the equation of detailed balancing and remembering that Template:Math yields A21g2ehν/kT+B21g2ehν/kTF(ν)ehν/kT1=B12g1F(ν)ehν/kT1, or A21g2(1ehν/kT)+B21g2F(ν)ehν/kT=B12g1F(ν).

The above equation must hold at any temperature, so from T one gets B21g2=B12g1, and from T0 A21g2=B21g2F(ν).

Therefore, the three Einstein coefficients are interrelated by A21B21=F(ν) and B21B12=g1g2.

When this relation is inserted into the original equation, one can also find a relation between A21 and B12, involving Planck's law.

Oscillator strengths

The oscillator strength f12 is defined by the following relation to the cross section σ for absorption:[19] σ=e24ε0mecf12ϕν=πe22ε0mecf12ϕω,

where e is the electron charge, me is the electron mass, and ϕν and ϕω are normalized distribution functions in frequency and angular frequency respectively. This allows all three Einstein coefficients to be expressed in terms of the single oscillator strength associated with the particular atomic spectral line: B12=e24ε0mehνf12,B21=e24ε0mehνg1g2f12,A21=2πν2e2ε0mec3g1g2f12.

Dipole approximation

The value of A and B coefficients can be calculated using quantum mechanics where dipole approximations in time dependent perturbation theory is used. While the calculation of B coefficient can be done easily, that of A coefficient requires using results of second quantization. This is because the theory developed by dipole approximation and time dependent perturbation theory gives a semiclassical description of electronic transition which goes to zero as perturbing fields go to zero. The A coefficient which governs spontaneous emission should not go to zero as perturbing fields go to zero. The result for transition rates of different electronic levels as a result of spontaneous emission is given as (in SI units):[28][19][29] wifs.emi=ωif3e23πε0c3|f|r|i|2=Aif

For B coefficient, straightforward application of dipole approximation in time dependent perturbation theory yields (in SI units):[30][29] wifabs=u(ωfi)πe23ε02|f|r|i|2=Bifabsu(ωfi) wifemi=u(ωif)πe23ε02|f|r|i|2=Bifemiu(ωif)

Note that the rate of transition formula depends on dipole moment operator. For higher order approximations, it involves quadrupole moment and other similar terms.

Here, the B coefficients are chosen to correspond to ω energy distribution function. Often these different definitions of B coefficients are distinguished by superscript, for example, B21f=B21ω2π where B21f term corresponds to frequency distribution and B21ω term corresponds to ω distribution.[19] The formulas for B coefficients varies inversely to that of the energy distribution chosen, so that the transition rate is same regardless of convention.

Hence, AB coefficients are calculated using dipole approximation as: Aab=ωab3e23πε0c3|a|r|b|2Bab=πe23ε02|a|r|b|2 where ωab=EaEb and B coefficients correspond to ω energy distribution function.

Hence the following ratios are also derived: B12B21=1 and AifB=ωif3π2c3

Derivation of Planck's law

It follows from theory that:[29] dNbdt=AbaNbNbu(ωba)Bba+Nau(ωba)Bab=Nbwbas.emiNbwbaemi+Nawababs where Na and Nb are number of occupied energy levels of Ea and Eb respectively, where Eb>Ea. Note that from time dependent perturbation theory application, the fact that only radiation whose ω is close to value of ωba can produce respective stimulated emission or absorption, is used.

Where Maxwell distribution involving Na and Nb ensures NaNb=eEaβeEbβ=eωbaβ

Solving for u for equilibrium condition dNbdt=0 using the above equations and ratios while generalizing ωba to ω, we get: uω(ω,T)=ω3π2c31eωβ1 which is the angular frequency energy distribution from Planck's law.[29]

See also

Template:Div col

Template:Div col end

References

Template:Reflist

Cited bibliography

Template:Refbegin

  • Chandrasekhar, S. (1950). Radiative Transfer, Oxford University Press, Oxford.
  • Garrison, J. C., Chiao, R. Y. (2008). Quantum Optics, Oxford University Press, Oxford UK, Template:ISBN.
  • Goody, R. M., Yung, Y. L. (1989). Atmospheric Radiation: Theoretical Basis, 2nd edition, Oxford University Press, Oxford, New York, 1989, Template:ISBN.
  • Template:Cite journal Translated as "Quantum-theoretical Re-interpretation of kinematic and mechanical relations" in

Template:Cite book

Template:Refend

Other reading

Template:Refbegin

Template:Refend

Template:Albert Einstein

bg:Атомна спектрална линия it:Linea spettrale atomica pl:Widmo liniowe zh:原子谱线#爱因斯坦系数

  1. Template:Cite journal
  2. Template:Cite journal
  3. 3.0 3.1 Template:Cite journal Translated in Template:Cite book
  4. Template:Cite book
  5. Template:Harvnb.
  6. Template:Cite book
  7. Template:Cite book
  8. Template:Cite journal
  9. Template:Cite journal
  10. Baltes, H. P. (1976). On the validity of Kirchhoff's law of heat radiation for a body in a nonequilibrium environment, Chapter 1, pages 1–25 of Progress in Optics XIII, edited by E. Wolf, North-Holland, Template:ISSN.
  11. Template:Cite journal
  12. Chandrasekhar, S. (1950), p. 7.
  13. 13.0 13.1 Mihalas, D., Weibel-Mihalas, B. (1984), pp. 329–330.
  14. Loudon, R. (2000), Section 1.5, pp. 16–19.
  15. Template:Cite journal
  16. Template:Cite journal Translated in Template:Cite book Also in Boorse, H. A., Motz, L. (1966). The world of the atom, edited with commentaries, Basic Books, Inc., New York, pp. 888–901.
  17. Template:Cite journal
  18. Template:Cite book
  19. 19.0 19.1 19.2 19.3 Template:Cite web
  20. Herzberg, G. (1950).
  21. Yariv, A. (1967/1989), pp. 171–173.
  22. Garrison, J. C., Chiao, R. Y. (2008), pp. 15–19.
  23. Chandrasekhar, S. (1950), p. 354.
  24. Goody, R. M., Yung, Y. L. (1989), pp. 33–35.
  25. Loudon, R. (1973/2000), pp. 16–19.
  26. Robert W. Boyd, Radiometry and the Detection of Optical Radiation, John Wiley and Sons, 1983
  27. Template:Cite book
  28. Template:Cite book
  29. 29.0 29.1 29.2 29.3 Template:Cite web
  30. Template:Cite web