Search results

{{Short description|Device to increase vehicle traction}} ...ve been developed to temporarily cover grousers/cleats in order to allow a vehicle to travel on paved roads. ...

...he number of input-output devices, and software compatibility with upgrade parts. | Relative || Angle in deck-plane coordinates using vehicle heading as the reference ...

...y Information]</ref>In 1971, on NASA's Apollo 15 mission, the Lunar Roving Vehicle (LRV) was driven by one electric motor per wheel - connected by 80:1 Harmon The wave generator is made of two separate parts: an elliptical disk called a ''wave generator plug'' and an outer ball bear ...

* Spare parts ...solution for things like the Global Positioning System (GPS) because each vehicle occupies a slightly different orbit. ...

{{Short description|Process of controlling orientation of an aerospace vehicle}} ...trol''' is the process of controlling the orientation of a [[spacecraft]] (vehicle or satellite) with respect to an [[inertial frame of reference]] or another ...

...data and control information on 2 wire interconnections between different parts of electronic [[instrumentation]] and control system. This protocol is used ...ler]]s. Although CAN FD was primarily designed for use in high performance vehicle ECUs, the pervasiveness of classical CAN in the different industries will{{ ...

| variants =[[Artillery tractor]],<br>Recovery vehicle <!-- Vehicle/missile specifications --> ...

...ems generally used an [[inertial platform]] as their mounting point to the vehicle and the terms are sometimes considered synonymous. ...and begins to descend. Based on this information alone, they know how the vehicle is accelerating relative to itself; that is, whether it is accelerating for ...

Geometric roadway design can be broken into three main parts: alignment, profile, and cross-section. Combined, they provide a three-dime * The '''cross section''' shows the position and number of vehicle and bicycle lanes and sidewalks, along with their cross slope or [[banked t ...

...systems (CWKPS). The kite system is characterized by [[energy]]-harvesting parts flying transversely to the direction of the ambient wind, i.e., to [[crossw ...vement of crosswinding tethered wings is sometimes compared with the outer parts of conventional wind turbine blades. However, a conventional traverse-to-wi ...

...of a continuous guideway on equally spaced supports traversed by a moving vehicle |url=http://dx.doi.org/10.1016/0022-460x(79)90487-5 |journal=Journal of Sou ...O. |date=2014-04-03 |title=Railway-induced ground vibrations – a review of vehicle effects |journal=International Journal of Rail Transportation |volume=2 |is ...

...story of wheel/rail contact mechanics: from Redtenbacher to Kalker|journal=Vehicle System Dynamics|year=2008|volume=46|issue=1–2|pages=9–26|doi=10.1080/004231 ...].<ref name=Pacejka2002>{{cite book|last=Pacejka|first=Hans|title=Tire and Vehicle Dynamics|year=2002|publisher=Butterworth-Heinemann|location=Oxford}}</ref> ...

...f> the [[Wingless Electromagnetic Air Vehicle|wingless electromagnetic air vehicle]], and [[magnetoplasmadynamic thruster]] (which does use propellant). ...

...and readily available (it is easier to find cars and trucks than any other vehicle). ...ing a disaster. There are three main components: the number of trips for a vehicle, the volume, and the total number of vehicles. ...

{{short description|Motor vehicle automatic transmission models}} ...Ratios{{efn|Differences in gear ratios have a measurable, direct impact on vehicle dynamics, performance, waste emissions as well as fuel mileage}}<ref>{{cite ...

...urce]]: A path-finding problem that seeks to find the shortest path to all parts from the graph, starting from one vertex. ...is an extension of A* that considers two additional dimension representing vehicle state, so that the paths are actually possible. It was created by Stanford ...

...e a relative center of rotation somewhere along the line ''AB''. Since the parts cannot interpenetrate the relative rotation center must also be along the n ...ing between the gears. In fact, the gearing ratio between the two rotating parts is found by the ratio of the two distances to the relative center. In the e ...

...of propellers. It involves breaking an [[airfoil]] down into several small parts then determining the forces on them. These forces are then converted into [ increase through the disc to vehicle velocity, the Froude efficiency is equal to 1/(slip + 1).<ref name="Schmidt ...

...{rp|100}} The entire body behind the driver, almost half the length of the vehicle, tilted back for access to the engine. Returning to the Deep Sanderson disp ...ce problem for LawrenceTune, as they did not have enough room to store the parts and build the cars.<ref name="maverick"/>{{rp|102}} A solution was presente ...

...d built a concept car to explore how they might be applied to a full-sized vehicle. This car was the Panhard Dynavia. Parts to build a third Dynavia were produced but this car was never assembled.<re ...