Search results

==Transient solution== ===Response time=== ...

...e phenomenon in the opposite direction. It arises especially in the [[step response]] of [[bandlimited]] systems such as [[low-pass filter]]s. It is often foll ...as "the maximum peak value of the response curve measured from the desired response of the system."<ref>{{Cite book| title = Discrete-time control systems | fi ...

...physap:01980001502021900 |issn=0035-1687}}</ref> The technique studies the transient [[photoconductivity]] of a semiconductor sample during or after it is illum ...n the expected lifetime of the material relative to the illumination decay characteristics of the flash lamp, there are several modes that can be used for PCD measure ...

...] for estimating the behaviour of electromagnetic systems by its transient response, building on Sarkar's past work on the original pencil-of-function method.< A transient electromagnetic signal can be represented as:<ref name="generalized-1989"/> ...

...ar as bands or "ghosts" near edges; audibly, they appear as "echos" near [[Transient (acoustics)|transients]], particularly sounds from [[percussion instrument] ...tifacts is [[overshoot (signal)|overshoot]] and oscillations in the [[step response]] of a filter.]] ...

...nt-voltage behavior.png|thumb|250px|Nonideal ''p–n'' diode current-voltage characteristics]] ...explain the various bias regimes in the figure displaying current-voltage characteristics. Operation is described using [[band-bending diagram]]s that show how the l ...

...na. At the conditions of sufficiently fast binding energy oscillation, the transient binding energy variation frequency matches the natural frequencies of the r The basis of catalytic resonance theory utilizes the transient behavior of [[adsorption]], surface reactions, and desorption as surface bi ...

...the aim is to achieve an overall system performance with a flat amplitude response and constant delay over a prescribed frequency range,<ref name = Stewart>St ...s in waveforms that are transmitted with less degradation and have sharper transient edges with reduced overshoots (ringing)<ref>Cherry C., “Pulses and transien ...

RLC response to driving voltage occurs at the frequency for lossless oscillation, <math> ...b>}}. This means that circuits which have similar parameters share similar characteristics regardless of whether or not they are operating in the same frequency band. ...

...[[all-pass filter]]s, so they have a flat amplitude response, but a phase response which varies linearly (or almost linearly) with frequency. All lattice circ ...a cascade of other filter sections without affecting the overall amplitude response, nor will it create mismatch problems, but it will increase the phase slope ...

...nsion with the inverse power of the modulation frequency and the frequency characteristics of the cantilever arrangement.<ref name="Bolte">{{cite journal | last=Bolte ===One-dimensional transient finite element model=== ...

...e coaxial shunt have been widely used for many applications fast rise-time transient currents and high amplitudes but, highly integrated electronic devices pre ...properties of the FSSS in terms of response time, power loss and frequency characteristics, are the same as the shunt resistor but the cost is lower and the construct ...

Stable organorhodium compounds and transient organorhodium intermediates are used as catalyst such as in olefin [[hydrof Organometallic rhodium compounds share many characteristics with those of iridium, but less so with cobalt. Rhodium can exist in [[oxid ...

...nnel]]s, which influences the firing properties of the neuron and also the response of [[neuron]] to [[Synapse|synaptic]] inputs.<ref name="Mathematical founda ...nigra pars compacta]] (SNc). This frequencies can dramatically increase in response to a cue predicting reward or unpredicted reward. The actions that preceded ...

...ections cause several undesirable effects, including modifying [[frequency response]]s, causing [[Overcurrent|overload]] power in [[transmitter]]s and [[overvo ...wledge of what is at the end of the line and is only affected by the local characteristics of the line. However, if the line is of length <math> \ell</math> the step ...

...., "Concentration Dynamics Modeling for Continuous Particulate Air Monitor Response Prediction", ''IEEE Transactions on Nuclear Science'', '''49''', 5, Oct 200 ...s the decay constant approaches zero. If there is any question about which response model to use, the SL expressions will ''always'' apply; however, the LL equ ...

* A clearer understanding of a system's performance characteristics. Modelling of a transmission line is done to analyse its performance and characteristics. The gathered information vis simulating the model can be used to reduce lo ...

...which sweeps linearly in frequency from F1 Hz to F2 Hz, a device with the characteristics of a dispersive delay line is required. This provides most delay for the fr ...e dispersive characteristics. So, if the transmit filter has a group delay response which increases with frequency, then the receive filter will have one which ...

#'''Simple filters'''. The frequency dependence of electrical response was known for capacitors and inductors from very early on. The resonance ph ...l (at least if implemented with ideal components) accurately reproduce the response originally specified in [[black box]] terms. ...

...y in [[Die (integrated circuit)|die]] size and layout, precision and speed characteristics, minimal operating currents, [[safe operating area]]s, and specific voltage The open-loop [[frequency response]] of a TL431 can be reliably approximated as a first-order [[low-pass filte ...