Search results

...s laser]]s,<ref>F. J. Duarte, Multiple-prism Littrow and grazing incidence pulsed CO₂ lasers, ''Appl. Opt.'' '''24''', 1244-1245 (1985).</ref><ref ...\lambda</math> ≈ 0.0004&nbsp;nm at 590&nbsp;nm) in pulses ~ 3 ns wide, at power levels in the kW regime.<ref name=FJD1999/> ...

...b|right|300px|A sequence for a stationary-pulsed-stationary maneuver for a pulsed thermal nuclear rocket. ...r [[specific impulse]] is required, the nuclear core is "switched on" to a pulsed mode. In this mode, the fuel is continuously quenched and instantaneously h ...

* [[fiber coupler]] (FC) to couple out a fraction of the light power ...elay fiber, enabling high energy pulses to be produced directly with a low-power [[semiconductor laser]]. Shorter pulses in the femtosecond regime might be ...

* Power generation: generates power from a mechanical input, e.g. MEMS energy harvesters [[File:Pulsed layer deposition.jpg|thumb|center|200px|Pulsed Layer Deposition]] ...

...ers are optically [[Laser pumping|pumped]] using [[Flashtube|flashlamps]], pulsed [[dye laser]]s or [[Laser diode|diode lasers]]. The strongest emission line Pr:YLF lasers can be operated in continuous wave (cw) or pulsed mode. [[Q-switching|Q-Switched]] and [[Nonlinear optics|frequency-doubled]] ...

...ies are violated in nonlinear optics, which frequently involves high-power pulsed lasers. Also, many material interactions including absorption and [[fluores ...

...Krishnan |author3=F. Blaabjerg |name-list-style=amp | title = Control in Power Electronics: Selected Problems ...oks?id=6_dmMHEyvrkC&dq=%22space+vector+modulation%22+intitle:%22Control+in+Power+Electronics%22&pg=PA373 ...

...d ESR experiments (HYSCORE, [[Electron nuclear double resonance|ENDOR]], [[Pulsed electron paramagnetic resonance|ESEEM]], ''etc.''). ** Pulsed dipolar spectroscopy (DEER, RIDME, ''etc.''). ...

...e and J. A. Piper, "Dispersion theory of multiple-prism beam expanders for pulsed dye lasers", ''Opt. Commun.'' '''43''', 303–307 (1982).</ref><ref name="Dua ...simplifies to<ref name=B1/><ref name="DLP">F. J. Duarte, Narrow-linewidth pulsed dye laser oscillators, in ''Dye Laser Principles'' (Academic, New York, 199 ...

...radiation, it can be directly related to the irradiation [[power (physics)|power]] [[Thermopile Laser Sensors#Sensitivity|(see section 2.1)]]. ...009|isbn=9781566777223}}</ref> making thermopile sensors suitable for high power measurements.<ref name=":8">{{Cite web|url=http://www.thorlabs.de/newgroupp ...

...esonance]] (EPR) transition.<ref name=ENDORreview>{{cite journal | title = Pulsed Electron-Nuclear Double Resonance Methodology | journal = [[Chem. Rev.]] | ...ive balance between electron and nuclear spin relaxation rates and applied power (given long enough relaxation rates).<ref name="Goldfarb2006"/> ...

...e-domain diffuse optics consists of three fundamental components namely, a pulsed laser source, a single photon detector and a timing electronics. ...ction]]; high repetition rate (>20&nbsp;MHz) and finally, sufficient laser power (>1&nbsp;mW) to achieve good [[Signal-to-noise ratio|signal to noise ratio] ...

...[temperature]], <math> P_{\rm out} </math> is the output [[Power (physics)|power]], and <math> \Delta \nu_{\rm c}^* </math> and <math> \Delta \nu_{\rm c} = ...nal | last1 = Sommers | first1 = H. S. | year = 1974 | title = Spontaneous power and the coherent state of injection lasers | journal = Journal of Applied P ...

...d via a precipitation process for lithium-ion battery cathodes. Journal of Power Sources, 174(2), 1032-1035.</ref> However, amorphous oxides, in particular ...nic Radical-Inorganic Hybrid Cathode for Lithium-Ion Batteries. Journal of Power Sources, 233(3): 69-73. doi:10.1016/j.jpowsour.2013.01.076.</ref> ...

A high power infrared laser is typically used. Its beam is split by a beamsplitter into ...der to maximize the power of the THz light commonly generated by a voltage-pulsed photoconductive antenna. The generated THz light is collected through a hyp ...

...ams must circulate for many hours, are much more demanding than those of a pulsed synchrotron, as the SPS.<ref name=Evans2>{{cite book |last1=Evans |first1=L ...kner>{{cite conference |url=https://cds.cern.ch/record/159839?ln=en |title=Pulsed Operation of the CERN SPS Collider |last1=Lauckner |first1=R. |date=October ...

...s a type of [[time-of-flight mass spectrometer]] (TOF MS) that comprises a pulsed ion source, field-free region, ion mirror, and ion detector and uses a sta ...a simpler (so-called linear) time-of-flight mass spectrometer comprising a pulsed ion source, flight tube, and ion detector. The masses of ions analyzed in ...

...rl-status= |publisher=ELI ERIC |page=10 }}</ref> ELI operates several high-power, high-repetition-rate laser systems which enable the research of physical, ...y]] near [[Prague]], [[Czech Republic]]. ELI Beamlines operates high peak-power femtosecond laser systems with high-energy and high-repetition-rate capabil ...

...narrow emission band.<ref name=mtfj /> About 70–80% of the whole radiation power of an excimer lamp is concentrated in this emission band. The [[full width ...ules, which are mainly excited and ionized rare gas atoms. Introduction of power into a gaseous mixture results in the formation of excited and ionized rare ...

...often referred to as computational ghost imaging. By using [[Pulsed laser|pulsed-lasers]] as the light source, single-pixel imaging was applied for [[Time-o ...n-zero coefficients) or r-compressible (the sorted coefficients decay as a power law). This is the principle behind compression standards like [[JPEG]] and ...