Search results

...rpose of inverting the image. They may be made of one or more conventional lenses or [[achromatic doublet]]s, or a long cylindrical [[gradient-index optics|g ...the [[zoom lens]] produces an image plane where the [[image sensor]] or [[photographic film]] would usually go. If you place another lens with [[focal length]] ' ...

...enses-and-better-images |title=Sony's curved sensors may allow for simpler lenses and better images ...gslake1989">{{cite book|last=Kingslake|first=Rudolf|title=A History of the Photographic Lens|url=https://books.google.com/books?id=OJrJrEJ-r9QC&pg=PA4|accessdate=3 ...

...tish journal of photography, Volume 150, Issues 7410-7422 by The Liverpool Photographic Society]</ref> ...image]] of parallel light, for example telescopes and microscopes. Afocal photographic setups work because the imaging device's eyepiece produces [[collimated]] l ...

...1 Ultra]] with periscope telephoto lens (rectangular opening below the two lenses)]] Smartphone lenses are often marketed in terms of "optical zoom"<ref>{{cite web|url=https://ww ...

[[File:Nikon 1 V1 with lenses and flash.jpg|thumb|right|[[Nikon 1 V1]] with Nikkor 10-30mm f/3.5-5.6 atta [[File:Nikon 1 J1 white with lenses.jpg|thumb|right|[[Nikon 1 J1]] with Nikkor 10-30mm f/3.5-5.6, 10mm f/2.8 [[ ...

...e exclusively with [[refraction|light-refracting]] [[lens (optics)|optical lenses]] and does not use [[reflecting telescope|mirrors]] or [[Fresnel zone plate ...ng to the [[hour angle]] of the object to be observed. The [[lens (optics)|lenses]] were made of high-quality glass from the [[Schott AG|Glastechnisches Labo ...

...iates encoded and reconstructed images with a two step hologram process on photographic transparency. More experiments for holographic instruments such as the holo ...c optical element is in thin-profile [[Head-up display#Overview|combiner]] lenses for [[optical head-mounted display]]s.<ref name="ISWC2013">{{citation|last= ...

...zation#Sensor-shift|in-body image stabilization]] (IBIS) with manual focus lenses. ...r than all mentioned lens mounts. This flange distance allows for numerous lenses of nearly all other current and previous mounts to be mounted to Z-mount wi ...

...spersion]], [[transmittance]], [[thermal expansion]] and other parameters. Lenses produced for optical applications use a wide variety of materials, from [[s ...al material. They used it in the form of spheres filled with water to make lenses for lighting fires ([[burning glass]]), as described by [[Aristophanes]] an ...

The goal of these various lenses and aspect ratios was to capture as much of the frame as possible, onto as ...ayer composites). It went into obsolescence largely due to better cameras, lenses, and film stocks available for standard four-perforation formats, in additi ...

...ce falls on another surface, it forms an "objective speckle pattern". If a photographic plate or another 2-D optical sensor is located within the scattered light f ...photograph the laser's [[Gaussian profile]], accomplished by removing all lenses and projecting it onto an opaque liquid (milk) being the only surface flat ...

...he difference in [[optical path length]] through each of the two objective lenses is carefully minimized. By this, molecules residing in the common focal are ...versarial network|GAN]]s) have been used for super-resolution enhancing of photographic images extracted from optical microscopes,<ref>{{Cite book|last1=Ledig|firs ...

...was its second moon to be discovered, on 1 May 1949, by Gerard Kuiper, on photographic plates taken with the 82-inch telescope at McDonald Observatory. ...mple microscopes were made of silver or copper frames, holding hand-ground lenses were capable of magnification up to 275 times. Using these he was the first ...