Search results

...ched.<ref name=smeCM /> For decorative applications, this is often done by hand through the use of a scribing knife, etching needle or similar tool; modern ...d to remove the maskant, the most common being hand removal using scraping tools. This is frequently time-consuming and laborious, and for large-scale proce ...

...ature that commonly requires a tool to transfer the twisting force. Common tools for driving screws include [[screwdriver]]s, [[wrench]]es, [[coins]] and [[ ...the left-side [[Bicycle pedal#Attachment|pedal of a bicycle]] has a [[left-hand thread]].<ref>{{cite web | url = http://www.sheldonbrown.com/gloss_p.html#p ...

...otor and stator are both assembled from a stack of laminations [[Stamping (metalworking)|stamped]] from sheets of [[electrical steel]], typically 1&nbsp;mm thick. ...ction of movement from layer to layer changing between right-hand and left-hand, the wires cross and locate themselves within the gap of the layer undernea ...

* Cutting tools for example for lengthening [[Drill bit|drill bits]],<ref>{{Citation |title ...e files for programs where simulation of welding is possible. On the other hand, some of the knowledge is difficult<ref>{{Cite thesis |title=Friction stir ...