Search results

...ation of another mechanism or system. As a general [[actuator]], following standards have to be met: The basic principle can be described as the expression for [[mechanical work]]<br /> ...

...rico |last15=Maksym |first15=Geoffrey N. |date=2020-02-01 |title=Technical standards for respiratory oscillometry |url=https://erj.ersjournals.com/content/55/2/ ...the respiratory system ({{Math|Z_rs}}), which encompasses the [[Mechanical resistance|resistance]] of the respiratory system to flow ({{Math|R<sub>rs< ...

...generating pulses and a transducer for transforming electronic pulse into mechanical pulse having an oscillation frequency in range of 40&nbsp;kHz to 50&nbsp;kH ...rasonic pulse velocity test of concrete properties as specified in various standards | journal=Cement and Concrete Composites | pages=357–364| date=January 1996 ...

...lled result. The liquid pump can provide detergent or other liquids to the mechanical arm during testing to simulate washing and other normal uses.<ref>{{cite we ==Standards== ...

...es at least <math>2a</math> thick. With the aid of calibration resistivity standards, <math>\rho</math> can be determined at each probing by the probe pair. == Mechanical == ...

...ational System of Units (SI) |date=2008 |publisher=[[National Institute of Standards and Technology]] |page=66 }}</ref> ...on of units#Pressure or mechanical stress|Conversion of units: Pressure or mechanical stress]] ...

...t Zeeman-split-sublevel in a sufficient way without needing a full quantum mechanical description.<ref name="Siegman" /> ...5717/http://physics.nist.gov/Pubs/AtSpec/node17.html National Institute of Standards and Technology] ...

...fetime of the geonet, are also of importance. Thus, a number of physical, mechanical, endurance, and environmental properties will also be mentioned. ...in [[ASTM]], [[International Organization for Standardization|ISO]] or GRI Standards. ...

== ASME Standards == ...tion and Validation in Computational Fluid Dynamics and Heat Transfer”]. ''Standards''. ASME. Retrieved 2 September 2018.</ref> ASME V&V 40 provides a framework ...

{{short description|Metricated industry standards}} ...wide Manufacturing|last=Kverneland|first=Knut O.|publisher=Amer Society of Mechanical Engineers|year=1996|isbn=978-0791800416}}</ref> ...

...ook|last=Soboyejo|first=W. O.|url=http://worldcat.org/oclc/300921090|title=Mechanical properties of engineered materials|date=2003|publisher=Marcel Dekker|isbn=0 ...ook|last=Soboyejo|first=W. O.|url=http://worldcat.org/oclc/300921090|title=Mechanical properties of engineered materials|date=2003|publisher=Marcel Dekker|isbn=0 ...

...at the development of the premium efficiency standard (IE3) and premium [[Mechanical efficiency|efficiency]] motors (PEMs) and associated environmental, [[Envir ...40% of global electricity used to drive pumps, fans, compressors and other mechanical traction equipment. Motor technology has evolved over the last few decades. ...

...f Trapped Ions| journal = Journal of Research of the National Institute of Standards and Technology| volume=103| pages=259–328 | year =1998 | issue =3| doi=10.6 ...e used to couple the internal state of an ion with its motional state. The mechanical recoil of the ion upon absorption or emission of a photon is described by t ...

...mics)}}Mechanical work performed on a working fluid causes a change in the mechanical constraints of the system; in other words, for work to occur, the volume mu ...energy. The product <math>pV</math> is the energy lost to a system due to mechanical work. This product is one term which makes up [[enthalpy]] <math>H</math>: ...

...CAMPUS is based on [[International Organization for Standardization|ISO]] standards 10350,<ref name="ISO10350">ISO 10350, "Plastics – Acquisition and presentat ...50" /> and ISO 11403.<ref name="ISO11403" /> In the years after, these two standards were revised several times, most recently in 2008 resp. 2003. ...

...peed, gas flow rate, and torch orientation all influence the integrity and mechanical properties of the finished weld. Gas temperature and flow rate are controll ...ırım|first4=Hüseyin|date=2008-04-01|title=Effects of welding procedures on mechanical and morphological properties of hot gas butt welded PE, PP, and PVC sheets| ...

...icians performing concrete tests are certified to do so according to these standards. [[Structural design]], concrete material design and properties are often ...rence Laboratory] (CCRL) of the [http://www.nist.gov National Institute of Standards and Technology] (NIST) in the U.S., or regional equivalents internationally ...

...iehle |url=https://books.google.com/books?id=q9AKk3smIJwC |title=Frequency Standards: Basics and Applications |date=8 May 2006 |publisher=John Wiley & Sons |isb ...en the laser detuning is zero, can be used for very sensitive detection of mechanical motion, such as used in [[LIGO]]. ...

{{Short description|Mechanical test for materials}} ...th three-point bending.,<ref>ASTM C1161-13, section 4: http://www.astm.org/Standards/C1161.htm</ref> Compared with [[Three-point flexural test|three-point bendi ...

...behavior of the material in greater depth to better understand the complex mechanical and metallurgical phenomena ([[crack propagation]], work softening, strain ...9-1361-x|s2cid=182197597 }}</ref> This event caused Chilean seismic design standards to be updated based on observations on damaged structures caused by the ear ...