Search results
Jump to navigation
Jump to search
Page title matches
- ...2=Vanessa |last3=Achten |first3=Wouter M. J. |date=2020-03-10 |title=Input-output models and waste management analysis: A critical review |url=https://www.sc ...ra |first1=Shinichiro |last2=Kondo |first2=Yasushi |date=2002 |title=Input-Output Analysis of Waste Management |url=https://onlinelibrary.wiley.com/doi/10.11 ...31 KB (4,512 words) - 06:00, 25 November 2024
Page text matches
- * A read-only ''input'' tape. * A write-only, write-once ''output'' tape. ...2 KB (429 words) - 08:26, 18 November 2024
- ...rential DC voltage required between the inputs of an amplifier to make the output zero}} ...] with respect to ground or between differential outputs, depending on the output type).<ref>{{cite book |title=Fundamentals of Analog Circuits |last=Floyd | ...3 KB (508 words) - 04:50, 1 December 2023
- ...ple mass in one-dimensional space under the effect of a time-varying force input <math>\textbf{u}</math>. ...th>. In the scalar form, the control input is the second derivative of the output <math>q</math>. ...3 KB (383 words) - 07:15, 31 August 2024
- ...= P. | doi = 10.1088/0964-1726/10/3/303 | title = Modal identification of output-only systems using frequency domain decomposition | journal = Smart Materia ## Using the mode shapes, an input-output system realization can be written. ...2 KB (325 words) - 10:16, 8 August 2023
- ...l]], [[time invariant]] [[nonlinear system]] to a [[Sine wave|sinusoidal]] input signal: ...output is denoted by <math> y(t) </math> and consists of harmonics of the input frequency: ...3 KB (443 words) - 01:55, 14 January 2020
- ...ng the low-frequency transfer functions from a defined input source to the output terminal, instead of the resistance seen by the reactive elements. ...stant <math display="inline">H^0</math> denotes the ratio of the output to input when all elements are zero-valued (hence the superscript of 0). <math displ ...2 KB (288 words) - 00:57, 22 May 2024
- ...ideal input threshold value and the measured threshold level of a certain output code. This measurement is performed after offset and gain errors have been ...n other words, the line connecting the smallest and largest measured input/output value. An alternative is to use a [[linear regression|best fit line]], wher ...3 KB (520 words) - 21:15, 17 March 2024
- ...ref> It is based on the [[Geometric mean|mathematic geometric mean]]. The output image G(x,y) of a geometric mean is given by ...ower of 1/mn. For example, using a mask size of 3 by 3, pixel (x,y) in the output image will be the product of S(x,y) and all 8 of its surrounding pixels rai ...3 KB (415 words) - 02:17, 8 October 2021
- ...> belongs to the set of [[computable function]]s, and <math>X</math> is an input vector. While testing the system, various test vectors must be used to exa For example, consider a login page with two input fields: a [[username]] field and a [[password]] field. In that case, the lo ...2 KB (403 words) - 16:03, 3 February 2025
- ...google.com/books?id=-luzt97NKLEC&q=SiTF+signal-transfer-function+input-and-output&pg=PA247 }}</ref> ...al. Finally, the net signal is plotted versus the signal input. The signal input of the UUT is within its own spectral response. (e.g. [[color temperature|c ...4 KB (634 words) - 05:53, 22 May 2021
- ...etely deterministic: for any given input and any desired output length the output is always the same. ...eed to the function is unknown, it should be infeasible to distinguish the output from a truly random string.<ref name="rsa">{{cite web |url=https://www.ietf ...7 KB (996 words) - 21:03, 8 April 2024
- ...ghtened by three surrounding balls. The fine focusing knob connects to the input axle while the fast focusing knob connects to the holder shelf. On the othe ...t a slower speed. The metal balls then push the holder shelf and drive the output axle. As a result, rotating either of the focusing knobs will cause the oth ...3 KB (494 words) - 08:40, 15 February 2024
- ...ut a comparator is designed to operate with positive feedback and with its output saturated at one power rail or the other. If necessary, an op-amp can be pr [[Bistability|Bistable]] output that indicates which of the two inputs has a higher voltage. That is, ...6 KB (943 words) - 05:16, 25 November 2024
- ...using two input [[Noise (electronics)|noise levels]], and by measuring the output noise factor (referred to as ''Y'') the [[noise figure]] of the amplifier c ...is determined by calculating the noise in a 50 [[ohm]] [[resistor]] at the input of the receiver as follows: ...3 KB (555 words) - 02:37, 21 September 2024
- ...r be high, the binary code of this 'hot' line is produced on the ''n''-bit output lines. A binary encoder is the [[Duality (mathematics)|dual]] of a [[binary ...a simple encoder can generate an incorrect output when more than a single input is active, so a [[priority encoder]] is required in such cases. ...6 KB (741 words) - 09:46, 21 December 2024
- ...the filtering of lower frequency inputs signals, leaving the steady state output unaffected by unwanted low frequency inputs. ...constant steady state value. Conversely, the filter will “wash out” sensed input signals that is of lower frequency (constant steady-state signal). [C.K. Wa ...2 KB (382 words) - 20:23, 16 June 2023
- ...applications that require a linear phase response because it will pass the input without phase distortion.<ref>IIR Filters and FIR Filters. (2012, June). Re ...f the input with a transfer function <math>h(t)</math> provides a filtered output. The mathematical model of this type of filter is: ...6 KB (948 words) - 15:39, 11 April 2024
- * If [[monochromatic light]] enters an unchanging linear-optical system, the output will be at the same frequency. For example, if red light enters a lens, it ...into output D, then an input consisting of A and C simultaneously give an output of B and D simultaneously. ...4 KB (543 words) - 21:47, 19 January 2022
- If the input is The normalized output is ...2 KB (338 words) - 02:31, 2 September 2024
- ...nd [[switch]]es, designed to create an [[attenuation]] from an input to an output signal, where the [[logarithm]] of the attenuation ratio is proportional to == Logarithmic input/output behavior == ...7 KB (1,078 words) - 02:56, 28 June 2023