Search results

Alternatives to the quarter-wave impedance transformer include lumped circuits that can produce the impedance inverter function, and [[Stub (electronics)| ...of ''J''-inverters, resulting in a mixed lumped-element and [[distributed-element]] design.]] ...

...e: The source delivers the [[voltage]] as per the voltage of the dependent element. <math>V={f_a}({v_x})</math> ...ivers the [[Electric current|current]] as per the voltage of the dependent element. <math>I={f_b}({v_x})</math> ...

...ommensurate line theory is particularly useful for designing [[distributed-element filter]]s for use at [[microwave]] frequencies. ...cally repeat, limiting the frequency range over which they are effective. Circuits designed by the methods of Richards and Kuroda are not the most compact. R ...

[[Category:Distributed element circuits]] ...

[[Category:Distributed element circuits]] ...

--><ref group=note name=element>'''Element'''. A component in a network, an individual resistor (R), inductor (L) or c ...elements. For instance, a network consisting solely of LC elements is a 2-element-kind network.</ref><!-- ...

[[Category:Distributed element circuits]] ...

...ed]] to remove certain [[frequency|frequencies]] and allow others to pass. Circuits that perform this function are generally [[linear filter|linear]] in their ...mechanics. Likewise, there are corresponding components in [[distributed-element filter]]s. ...

...ion|Electrical circuits composed of lengths of transmission lines or other distributed components}} ...ements. The circuitry on the right is [[lumped element]]s. The distributed-element circuitry is centre and left of centre, and is constructed in [[microstrip] ...

...gth. The circuit representation of these elements requires a [[distributed-element model]] and consequently [[calculus]] must be used to analyse the circuit. ...ig. 1.''' Equivalent circuit representation of a transmission line using [[distributed elements]]. {{math|δ''L''}}, {{math|''δR''}}, {{math|''δC''}} and {{math|'' ...

...Hz Agilent N9344C spectrum analyser showing various microstrip distributed-element filter technology elements]] ...itors and inductors. There is no precise frequency above which distributed element filters must be used but they are especially associated with the [[microwav ...

...[Electrical element|element]] in the electrical domain has a corresponding element in the mechanical domain with an analogous [[constitutive equation]]. All l ...and the electrical representations produced are the [[dual impedance|dual circuits]] of each other. The impedance analogy preserves the analogy between [[ele ...

...eam ports) to which power is applied, and <math>n</math> output ports (the element ports) to which <math>n</math> antenna elements are connected. The Butler ...[[Passivity (engineering)|passive]] and [[Reciprocity theorem (electrical circuits)|reciprocal]], the same matrix can do both – in a [[transceiver]] for insta ...

...[Electrical element|element]] in the electrical domain has a corresponding element in the mechanical domain with an analogous [[constitutive equation]]. All ...and the electrical representations produced are the [[dual impedance|dual circuits]] of each other. The mobility analogy preserves the topology of the mechan ...

...abstract topological diagram (the [[circuit diagram]]) using the [[lumped element model]] and the ability of network analysis to [[Network synthesis filters| ...-ideal components can be accommodated in this model by using more than one element to represent the component. For instance, a [[electromagnetic coil|coil]] ...

...line impedance by setting the position of the feed point along the antenna element. ...ement required [[distributed-element]] RF components such as [[Distributed-element filter|filters]], while at the same time being economical because the same ...

...ive current traveling in the reverse direction), the [[Duality (electrical circuits)|dual]] situation to the open circuit case.<ref name=Pai/> ...the discontinuity. For the example shown (figure&nbsp;6) of a shunt lumped element, ...

...ily measured in the [[transmission line]] technology used in [[distributed-element circuit]]s in the microwave band. The most well known and widely used of t ...rt with a transfer matrix is a useful thing to do because, like electrical circuits, the component can often be operated in reverse and its behaviour is depend ...

{{about|the topology of electrical circuits|the topology of polymers|Circuit topology}} ...ectronic circuit]] is the form taken by the [[Network analysis (electrical circuits)|network]] of interconnections of the circuit components. Different specif ...

...ame is ambiguous: [[multitree]]s also refer to partial orders with no four-element diamond suborder<ref>{{citation ...ifferent partial order that reverses the order relations of pairs with one element in {{mvar|P}} and one in {{mvar|Q}}.<ref name="bgr"/> ...