Search results

...ef>Standard ISO 7539-7:2005 (last reviewed 2014), "Corrosion of metals and alloys -- Stress corrosion testing -- Part 7: Method for slow strain rate testing" ...as well as for relative ranking of susceptibility to cracking of different alloys, or the aggressiveness of environments and the effect of temperature, pH, m ...

{{Short description|Aluminium alloys containing magnesium}} ...inium–magnesium–copper alloys]] (AlMgCu) and [[aluminium–magnesium–silicon alloys]] (AlMgSi, 6000 series). ...

...rovides a protecting effect against further surface oxidation (examples [[aluminium]], [[titanium]], [[chromium]]-containing [[steel]]s). ...that is consumed and weakened due to oxidation. The P–B ratio of Zirconium alloys can vary between 1.48 and 1.56,<ref name="Annand"/> meaning that the oxide ...

'''Nanosized aluminium oxide ''' (nanosized [[alumina]]) occurs in the form of spherical or nearly ...es, of the final material, defined as the set of properties of the solid [[Aluminium oxide]] and specific properties of nanostructures. ...

.... Petrov, ''Manganese Influence on Stacking-Fault Energy in Iron-Manganese Alloys'', Physics of Metals and Metallography, Vol. 42 (1976), pp. 126 -130.</ref .... Hsu and Xu Zuyao, ''The stability of transition phases in Fe-Mn-Si based alloys'', CALPHAD, Vol. 25 (2001), pp. 355-362. {{Doi|10.1016/S0364-5916(01)00055- ...

...osion|corrosion resistance]]. It is one of the most commonly used titanium alloys and is applied in a wide range of applications where low density and excell ...st1=Gooch |first1=William A. |title=The Design and Application of Titanium Alloys to U.S. Army Platforms -2010 |url=https://c.ymcdn.com/sites/www.titanium.or ...

...=Marker loads for quantitative fractography of fatigue cracks in aerospace alloys |first=S. A. |last1=Barter |first2=L. |last2=Molent |first3=R. J. H. |last3 ...itative fractography markers for determining fatigue crack growth rates in aluminium and titanium aircraft structures |first1=M. |last1=McDonald |first2=R. |las ...

..."/> and was the inventor of the sub-chloride process for the extraction of aluminium.<ref name="N297"/> ...'bombshell'. Anticipating the requirements of what would become the [[Tube Alloys]] project, he lobbied for their release. He wrote to [[George Paget Thomson ...

...or abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 1: Wheel wear test<ref>{{cite web|url=http://www.webstore.jsa.or.jp ...or abrasion resistance of anodic oxide coatings on aluminium and aluminium alloys -- Part 2: Abrasive jet test<ref>{{cite web|url=http://www.webstore.jsa.or. ...

..., a soft paste or a solid, depending upon the proportion of mercury. These alloys are formed through [[metallic bonding]],<ref>Callister, W. D. "Materials Sc === Aluminium amalgam === ...

...nese alloys]]). The main area of application is aircraft construction. The alloys have medium to high strength and can be [[Precipitation hardening|age harde ...magnesium-silicon alloys]] (AlMgSi) or the naturally hard (non-hardenable) alloys. ...

...hysics | title=Band parameters for III–V compound semiconductors and their alloys | volume=89 | issue=11 | pages=5815–5875 | date=2001 | doi=10.1063/1.136815 * [[Aluminium arsenide antimonide]] - a ternary III-V compound that is used as a barrier ...

| title = Predicting yield-stress anomalies in L1₂ alloys: Ni₃Ge–Fe₃Ge pseudo-binaries ...=137118204}}</ref> and several other ordered [[intermetallic|intermetallic alloys]] demonstrate this effect. [[Precipitation hardening|Precipitation-hardened ...

...t the activation energy for grain boundary sliding in [[Zinc|Zn]]-5 wt.% [[Aluminium|Al]] increased by nearly 20% under the application of a 2 <chem>kV cm^{-1}< ...

...oustic resonance was first obtained in 1963 by Alers and Fleury in solid [[Aluminium|aluminum]].<ref name=":2">{{Cite journal|last1=Leisure|first1=R. G.|last2=H ...l in 1963 when the first observation of the phenomenon occurred in solid [[Aluminium|aluminum]] along with observation of its dispersion in 1973, and subsequent ...

...nd alloys such as [[glass]], [[quartz]], structural ceramics, Ti-alloys, [[Aluminium oxide|alumina]], and [[silicon carbide]].<ref>{{Cite book|title = Micro rot ...

* The extraction of aluminium using sub-halide sublimation * Aluminium-tin and aluminium-lead alloys for plain-bearings ...

...rst=Amit |date=2018 |title=Mechanical Properties and Working of Metals and Alloys |url=http://dx.doi.org/10.1007/978-981-10-7209-3 |journal=Springer Series i ...|date=April 1975|title=Microstructural-mechanism relationship in the zinc/ aluminium eutectoid superplastic alloy|url=http://dx.doi.org/10.1016/0001-6160(75)900 ...

...y the interdiffusion coefficients that were calculated for nickel aluminum alloys.<ref>{{Cite journal |last=Watanabe |first=M. |last2=Horita |first2=Z. |last ...-6454(00)00390-6 | bibcode=2001AcMat..49..861K | title=On the diffusion of aluminium and titanium in the Ni-rich Ni-Al-Ti system between 900 and 1200°C | last1= ...

| Name = Lithium Aluminium Germanium Phosphate | ImageCaption = Lithium aluminium germanium phosphate (LAGP) sputtering target ...