Blackman's theorem

Blackman's theorem is a general procedure for calculating the change in an impedance due to feedback in a circuit. It was published by Ralph Beebe Blackman in 1943, was connected to signal-flow analysis by John Choma, and was made popular in the extra element theorem by R. D. Middlebrook and the asymptotic gain model of Solomon Rosenstark. Blackman's approach leads to the formula for the impedance Z between two selected terminals of a negative feedback amplifier as Blackman's formula:

$Z=Z_D\frac{1+T_{SC}}{1+T_{OC}},$

where Z_D = impedance with the feedback disabled, T_SC = loop transmission with a small-signal short across the selected terminal pair, and T_OC = loop transmission with an open circuit across the terminal pair. The loop transmission also is referred to as the return ratio. Blackman's formula can be compared with Middlebrook's result for the input impedance Z_in of a circuit based upon the extra-element theorem:

$Z_{in}=Z_{in}^{\mathrm{\infty }}\left[\frac{1+Z_e^0/Z}{1+Z_e^{\mathrm{\infty }}/Z}\right]$

where:

$Z$ is the impedance of the extra element; $Z_{in}^{\mathrm{\infty }}$ is the input impedance with $Z$ removed (or made infinite); $Z_e^0$ is the impedance seen by the extra element $Z$ with the input shorted (or made zero); $Z_e^{\mathrm{\infty }}$ is the impedance seen by the extra element $Z$ with the input open (or made infinite).

Blackman's formula also can be compared with Choma's signal-flow result:

$Z_{SS}=Z_{S0}\left[\frac{1+T_I}{1+T_Z}\right],$

where $Z_{S0}$ is the value of $Z_{SS}$ under the condition that a selected parameter P is set to zero, return ratio $T_Z$ is evaluated with zero excitation and $T_I$ is $T_Z$ for the case of short-circuited source resistance. As with the extra-element result, differences are in the perspective leading to the formula.

See also

• Mason's gain formula

Further reading

• Template:Cite journal
• Template:Cite book
• Template:Cite journal

References

Template:Engineering-stub