Iribarren number

Template:Short description Template:Multiple image In fluid dynamics, the Iribarren number or Iribarren parameter – also known as the surf similarity parameter and breaker parameter – is a dimensionless parameter used to model several effects of (breaking) surface gravity waves on beaches and coastal structures. The parameter is named after the Spanish engineer Ramón Iribarren Cavanilles (1900–1967), who introduced it to describe the occurrence of wave breaking on sloping beaches. The parameter used to describe breaking wave types on beaches; or wave run-up on – and reflection by – beaches, breakwaters and dikes.

Iribarren Number (ξ₀) as a function of wave height with constant beach steepness of 7.5 degrees.

Iribarren's work was further developed by Jurjen Battjes in 1974, who named the parameter after Iribarren.

Definition

The Iribarren number which is often denoted as Ir or ξ – is defined as:

$\xi =\frac{\tan \alpha }{\sqrt{H/L_0}},$ Template:Pad with Template:Pad $L_0=\frac{g}{2\pi }{T}^2,$

where ξ is the Iribarren number, $\alpha$ is the angle of the seaward slope of a structure, H is the wave height, L₀ is the deep-water wavelength, T is the period and g is the gravitational acceleration. Depending on the application, different definitions of H and T are used, for example: for periodic waves the wave height H₀ at deep water or the breaking wave height H_b at the edge of the surf zone. Or, for random waves, the significant wave height H_s at a certain location.

Breaker types

Breaker types.

The type of breaking wave – spilling, plunging, collapsing or surging – depends on the Iribarren number. According to Template:Harvtxt, for periodic waves propagating on a plane beach, two possible choices for the Iribarren number are:

${\xi }_0=\frac{\tan \alpha }{\sqrt{H_0/L_0}}$ Template:Pad or Template:Pad ${\xi }_b=\frac{\tan \alpha }{\sqrt{H_b/L_0}},$

where H₀ is the offshore wave height in deep water, and H_b is the value of the wave height at the break point (where the waves start to break). Then the breaker types dependence on the Iribarren number (either ξ₀ or ξ_b) is approximately:

breaker type	ξ0–range	ξb–range
surging or collapsing	ξ0 > 3.3	ξb > 2.0
plunging	0.5 < ξ0 < 3.3	0.4 < ξb < 2.0
spilling	ξ0 < 0.5	ξb < 0.4

References

Other

• Template:Cite book
• Template:Citation
• Template:Citation
• Template:Citation
• Template:Citation