Van Laar equation

From testwiki
Revision as of 04:11, 28 July 2023 by imported>Citation bot (Alter: pages. Add: authors 1-1. Removed parameters. Formatted dashes. Some additions/deletions were parameter name changes. | Use this bot. Report bugs. | Suggested by Abductive | #UCB_webform 3731/3850)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Template:Short description The Van Laar equation is a thermodynamic activity model, which was developed by Johannes van Laar in 1910-1913, to describe phase equilibria of liquid mixtures. The equation was derived from the Van der Waals equation. The original van der Waals parameters didn't give good description of vapor-liquid equilibria of phases, which forced the user to fit the parameters to experimental results. Because of this, the model lost the connection to molecular properties, and therefore it has to be regarded as an empirical model to correlate experimental results.

Equations

Van Laar derived the excess enthalpy from the van der Waals equation:[1]

Hex=b1X1b2X2b1X1+b2X2(a1b1a2b2)2

In here ai and bi are the van der Waals parameters for attraction and excluded volume of component i. He used the conventional quadratic mixing rule for the energy parameter a and the linear mixing rule for the size parameter b. Since these parameters didn't lead to good phase equilibrium description the model was reduced to the form:

GexRT=A12X1A21X2A12X1+A21X2

In here A12 and A21 are the van Laar coefficients, which are obtained by regression of experimental vapor–liquid equilibrium data.

The activity coefficient of component i is derived by differentiation to xi. This yields:

{ln γ1=A12(A21X2A12X1+A21X2)2ln γ2=A21(A12X1A12X1+A21X2)2

This shows that the van Laar coefficients A12 and A21 are equal to logarithmic limiting activity coefficients ln(γ1) and ln(γ2) respectively. The model gives increasing (A12 and A21 >0) or only decreasing (A12 and A21 <0) activity coefficients with decreasing concentration. The model can not describe extrema in the activity coefficient along the concentration range.

In case A12=A21=A, which implies that the molecules are of equal size but different in polarity, then the equations become:

{ln γ1=Ax22ln γ2=Ax12

In this case the activity coefficients mirror at x1=0.5. When A=0, the activity coefficients are unity, thus describing an ideal mixture.

An extensive range of recommended values for the Van Laar coefficients can be found in the literature.[2][3] Selected values are provided in the table below.

System A12 A21
Acetone(1)-Chloroform(2)[3] Acetone(1)-Methanol(2)[3] 0.6184 0.5797
Acetone(1)-Water(2)[3] 2.1041 1.5555
Carbon tetrachloride(1)-Benzene (2)[3] 0.0951 0.0911
Chloroform(1)-Methanol(2)[3] 0.9356 1.8860
Ethanol(1)-Benzene(2)[3] 1.8570 1.4785
Ethanol(1)-Water(2)[3] 1.6798 0.9227

References

Template:Reflist