Egli model

From testwiki
Revision as of 11:31, 25 July 2023 by imported>Citation bot (Add: s2cid. | Use this bot. Report bugs. | #UCB_CommandLine 565/7965)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The Egli model is a terrain model for radio frequency propagation. This model, which was first introduced by John Egli in his 1957 paper,[1] was derived from real-world data on UHF and VHF television transmissions in several large cities. It predicts the total path loss for a point-to-point link. Typically used for outdoor line-of-sight transmission, this model provides the path loss as a single quantity.

Applicable to/under conditions

The Egli model is typically suitable for cellular communication scenarios where one antenna is fixed and another is mobile. The model is applicable to scenarios where the transmission has to go over an irregular terrain. However, the model does not take into account travel through some vegetative obstruction, such as trees or shrubbery.

Coverage

Frequency: The model is typically applied to VHF and UHF spectrum transmissions.

Mathematical formulation

The Egli model is formally expressed as:

PR=GBGM[hBhMd2]2[40f]2PT

Where,

PR = Receive power [W]

PT = Transmit power [W]

GB = Absolute gain of the base station antenna.

GM = Absolute gain of the mobile station antenna.

hB = Height of the base station antenna. [m]

hM = Height of the mobile station antenna. [m]

d = Distance from base station antenna. [m]

f = Frequency of transmission. [MHz]

Limitations

This model predicts the path loss as a whole and does not subdivide the loss into free space loss and other losses.

See also

References

Template:Reflist

Further reading

  • Introduction to RF propagation, John S. Seybold, 2005, John Wiley and Sons Inc.

Template:Radio frequency propagation models