Gaussian units: Difference between revisions

From testwiki
Jump to navigation Jump to search
imported>Hellacioussatyr
 
(No difference)

Latest revision as of 18:10, 26 January 2025

Template:Short description Template:Use British English

Carl Friedrich Gauss

Gaussian units constitute a metric system of units of measurement. This system is the most common of the several electromagnetic unit systems based on the centimetre–gram–second system of units (CGS). It is also called the Gaussian unit system, Gaussian-cgs units, or often just cgs units.Template:Efn The term "cgs units" is ambiguous and therefore to be avoided if possible: there are several variants of CGS, which have conflicting definitions of electromagnetic quantities and units.

SI units predominate in most fields, and continue to increase in popularity at the expense of Gaussian units.[1]Template:Efn Alternative unit systems also exist. Conversions between quantities in the Gaussian and SI systems are Template:Em direct unit conversions, because the quantities themselves are defined differently in each system. This means that the equations that express physical laws of electromagnetism—such as Maxwell's equations—will change depending on the system of quantities that is employed. As an example, quantities that are dimensionless in one system may have dimension in the other.

Alternative unit systems

Template:Main The Gaussian unit system is just one of several electromagnetic unit systems within CGS. Others include "electrostatic units", "electromagnetic units", and Heaviside–Lorentz units.

Some other unit systems are called "natural units", a category that includes atomic units, Planck units, and others.

The International System of Units (SI), with the associated International System of Quantities (ISQ), is by far the most common system of units today. In engineering and practical areas, SI is nearly universal and has been for decades.[1] In technical, scientific literature (such as theoretical physics and astronomy), Gaussian units were predominant until recent decades, but are now getting progressively less so.[1]Template:Efn The 8th SI Brochure mentions the CGS-Gaussian unit system,[2] but the 9th SI Brochure makes no mention of CGS systems.

Natural units may be used in more theoretical and abstract fields of physics, particularly particle physics and string theory.

Major differences between Gaussian and SI systems

"Rationalized" unit systems

One difference between the Gaussian and SI systems is in the factor Template:Math in various formulas that relate the quantities that they define. With SI electromagnetic units, called rationalized,[3][4] Maxwell's equations have no explicit factors of Template:Math in the formulae, whereas the inverse-square force laws – Coulomb's law and the Biot–Savart lawTemplate:Em have a factor of Template:Math attached to the Template:Math. With Gaussian units, called unrationalized (and unlike Heaviside–Lorentz units), the situation is reversed: two of Maxwell's equations have factors of Template:Math in the formulas, while both of the inverse-square force laws, Coulomb's law and the Biot–Savart law, have no factor of Template:Math attached to Template:Math in the denominator.

(The quantity Template:Math appears because Template:Math is the surface area of the sphere of radius Template:Mvar, which reflects the geometry of the configuration. For details, see the articles Relation between Gauss's law and Coulomb's law and Inverse-square law.)

Unit of charge

A major difference between the Gaussian system and the ISQ is in the respective definitions of the quantity charge. In the ISQ, a separate base dimension, electric current, with the associated SI unit, the ampere, is associated with electromagnetic phenomena, with the consequence that a unit of electrical charge (1 coulomb = 1 ampere × 1 second) is a physical quantity that cannot be expressed purely in terms of the mechanical units (kilogram, metre, second). On the other hand, in the Gaussian system, the unit of electric charge (the statcoulomb, statC) Template:Em be written entirely as a dimensional combination of the non-electrical base units (gram, centimetre, second), as:

Template:Block indent

For example, Coulomb's law in Gaussian units has no constant: F=Q1GQ2Gr2, where Template:Mvar is the repulsive force between two electrical charges, Template:Math and Template:Math are the two charges in question, and Template:Mvar is the distance separating them. If Template:Math and Template:Math are expressed in statC and Template:Mvar in centimetres, then the unit of Template:Mvar that is coherent with these units is the dyne.

The same law in the ISQ is: F=14πε0Q1IQ2Ir2 where Template:Math is the vacuum permittivity, a quantity that is not dimensionless: it has dimension (charge)2 (time)2 (mass)−1 (length)−3. Without Template:Math, the equation would be dimensionally inconsistent with the quantities as defined in the ISQ, whereas the quantity Template:Math does not appear in Gaussian equations. This is an example of how some dimensional physical constants can be eliminated from the expressions of physical law by the choice of definition of quantities. In the ISQ, Template:Math converts or scales electric flux density, Template:Math, to the corresponding electric field, Template:Math (the latter has dimension of force per charge), while in the Gaussian system, electric flux density is the same quantity as electric field strength in free space aside from a dimensionless constant factor.

In the Gaussian system, the speed of light Template:Mvar appears directly in electromagnetic formulas like Maxwell's equations (see below), whereas in the ISQ it appears via the product Template:Math.

Units for magnetism

In the Gaussian system, unlike the ISQ, the electric field Template:Math and the magnetic field Template:Math have the same dimension. This amounts to a factor of [[speed of light|Template:Mvar]] between how Template:Math is defined in the two unit systems, on top of the other differences.[3] (The same factor applies to other magnetic quantities such as the magnetic field, Template:Math, and magnetization, Template:Math.) For example, in a planar light wave in vacuum, Template:Math in Gaussian units, while Template:Math in the ISQ.

Polarization, magnetization

There are further differences between Gaussian system and the ISQ in how quantities related to polarization and magnetization are defined. For one thing, in the Gaussian system, all of the following quantities have the same dimension: Template:Math, Template:Math, Template:Math, Template:Math, Template:Math, and Template:Math. A further point is that the electric and magnetic susceptibility of a material is dimensionless in both the Gaussian system and the ISQ, but a given material will have a different numerical susceptibility in the two systems. (Equation is given below.)

List of equations

This section has a list of the basic formulae of electromagnetism, given in both the Gaussian system and the International System of Quantities (ISQ). Most symbol names are not given; for complete explanations and definitions, please click to the appropriate dedicated article for each equation. A simple conversion scheme for use when tables are not available may be found in Garg (2012).[5] All formulas except otherwise noted are from Ref.[3]

Maxwell's equations

Template:Main

Here are Maxwell's equations, both in macroscopic and microscopic forms. Only the "differential form" of the equations is given, not the "integral form"; to get the integral forms apply the divergence theorem or Kelvin–Stokes theorem.

Maxwell's equations in Gaussian system and ISQ
Name Gaussian system Template:Abbr
Gauss's lawTemplate:Br(macroscopic) 𝐃G=4πρfG 𝐃I=ρfI
Gauss's law
(microscopic)
𝐄G=4πρG 𝐄I=1ε0ρI
Gauss's law for magnetism 𝐁G=0 𝐁I=0
Maxwell–Faraday equation
(Faraday's law of induction)
×𝐄G+1c𝐁Gt=0 ×𝐄I+𝐁It=0
Ampère–Maxwell equation
(macroscopic)
×𝐇G1c𝐃Gt=4πc𝐉fG ×𝐇I𝐃It=𝐉fI
Ampère–Maxwell equation
(microscopic)
×𝐁G1c𝐄Gt=4πc𝐉G ×𝐁I1c2𝐄It=μ0𝐉I

Other basic laws

Other electromagnetic laws in Gaussian system and ISQ
Name Gaussian system Template:Abbr
Lorentz force 𝐅=qG(𝐄G+1c𝐯×𝐁G) 𝐅=qI(𝐄I+𝐯×𝐁I)
Coulomb's law 𝐅=q1Gq2Gr2𝐫^ 𝐅=14πε0q1Iq2Ir2𝐫^
Electric field of
stationary point charge
𝐄G=qGr2𝐫^ 𝐄I=14πε0qIr2𝐫^
Biot–Savart law[6] 𝐁G=1cIG×𝐫^r2d 𝐁I=μ04πII×𝐫^r2d
Poynting vector
(microscopic)
𝐒=c4π𝐄G×𝐁G 𝐒=1μ0𝐄I×𝐁I

Dielectric and magnetic materials

Below are the expressions for the various fields in a dielectric medium. It is assumed here for simplicity that the medium is homogeneous, linear, isotropic, and nondispersive, so that the permittivity is a simple constant.

Expressions for fields in dielectric media
Gaussian system Template:Abbr
𝐃G=𝐄G+4π𝐏G 𝐃I=ε0𝐄I+𝐏I
𝐏G=χeG𝐄G 𝐏I=χeIε0𝐄I
𝐃G=εG𝐄G 𝐃I=εI𝐄I
εG=1+4πχeG εI/ε0=1+χeI

where

The quantities εG and εI/ε0 are both dimensionless, and they have the same numeric value. By contrast, the electric susceptibility χeG and χeI are both unitless, but have Template:Em for the same material: 4πχeG=χeI.

Next, here are the expressions for the various fields in a magnetic medium. Again, it is assumed that the medium is homogeneous, linear, isotropic, and nondispersive, so that the permeability is a simple constant.

Expressions for fields in magnetic media
Gaussian system Template:Abbr
𝐁G=𝐇G+4π𝐌G 𝐁I=μ0(𝐇I+𝐌I)
𝐌G=χmG𝐇G 𝐌I=χmI𝐇I
𝐁G=μG𝐇G 𝐁I=μI𝐇I
μG=1+4πχmG μI/μ0=1+χmI

where

The quantities μG and μI/μ0 are both dimensionless, and they have the same numeric value. By contrast, the magnetic susceptibility χmG and χmI are both unitless, but has Template:Em in the two systems for the same material: 4πχmG=χmI

Vector and scalar potentials

Template:Main

The electric and magnetic fields can be written in terms of a vector potential Template:Math and a scalar potential Template:Mvar:

Electromagnetic fields in Gaussian system and ISQ
Name Gaussian system Template:Abbr
Electric field 𝐄G=ϕG1c𝐀Gt 𝐄I=ϕI𝐀It
Magnetic B field 𝐁G=×𝐀G 𝐁I=×𝐀I

Electrical circuit

Electrical circuit values in Gaussian system and ISQ
Name Gaussian system Template:Abbr
Charge conservation IG=dQGdt II=dQIdt
Lenz's law VG=1cdΦGdt VI=dΦIdt
Ohm's law VG=RGIG VI=RIII
Capacitance QG=CGVG QI=CIVI
Inductance ΦG=cLGIG ΦI=LIII

where

Fundamental constants

Fundamental constants in Gaussian system and ISQ
Name Gaussian system Template:Abbr
Impedance of free space Z0G=4πc Z0I=μ0ε0
Electric constant 1=4πZ0Gc ε0=1Z0Ic
Magnetic constant 1=Z0Gc4π μ0=Z0Ic
Fine-structure constant α=(eG)2c α=14πε0(eI)2c
Magnetic flux quantum ϕ0G=hc2eG ϕ0I=h2eI
Conductance quantum G0G=2(eG)2h G0I=2(eI)2h
Bohr radius aB=2me(eG)2 aB=4πε02me(eI)2
Bohr magneton μBG=eG2mec μBI=eI2me

Electromagnetic unit names

Template:For

Template:Table alignment

Table 1: Common electromagnetism units in SI vs Gaussian[7]
Quantity Symbol SI unit Gaussian unitTemplate:Br(in base units) Conversion factor
Electric charge Template:Mvar C FrTemplate:Br(cm3/2⋅g1/2⋅s−1) qGqI=14πε02.998×109Fr1C
Electric current Template:Mvar A statATemplate:Br(cm3/2⋅g1/2⋅s−2) IGII=14πε02.998×109statA1A
Electric potential,Template:BrVoltage Template:MvarTemplate:BrTemplate:Mvar V statVTemplate:Br(cm1/2⋅g1/2⋅s−1) VGVI=4πε01statV2.998×102V
Electric field Template:Math V/m statV/cmTemplate:Br(cm−1/2⋅g1/2⋅s−1) 𝐄G𝐄I=4πε01statV/cm2.998×104V/m
Electric displacement field Template:Math C/m2 Fr/cm2Template:Br(cm−1/2g1/2s−1) 𝐃G𝐃I=4πε04π×2.998×105Fr/cm21C/m2
Electric dipole moment Template:Math Cm FrcmTemplate:Br(cm5/2⋅g1/2⋅s−1) 𝐩G𝐩I=14πε02.998×1011Frcm1Cm
Electric fluxTemplate:Efn Template:Math C FrTemplate:Br(cm3/2⋅g1/2⋅s−1) ΦeGΦeI=4πε04π×2.998×109Fr1C
Permittivity Template:Mvar F/m cm/cm εGεI=1ε04π×2.9982×109cm/cm1F/m
Magnetic B field Template:Math T GTemplate:Br(cm−1/2⋅g1/2⋅s−1) 𝐁G𝐁I=4πμ0104G1T
Magnetic H field Template:Math A/m OeTemplate:Br(cm−1/2⋅g1/2⋅s−1) 𝐇G𝐇I=4πμ04π×103Oe1A/m
Magnetic dipole moment Template:Math Am2 erg/GTemplate:Br(cm5/2⋅g1/2⋅s−1) 𝐦G𝐦I=μ04π103erg/G1Am2
Magnetic flux Template:Math Wb MxTemplate:Br(cm3/2⋅g1/2⋅s−1) ΦmGΦmI=4πμ0108Mx1Wb
Permeability Template:Mvar H/m cm/cm μGμI=1μ01cm/cm4π×107H/m
Magnetomotive force A GiTemplate:Br(cm1/2⋅g1/2⋅s−1) GI=4πμ04π×101Gi1A
Magnetic reluctance H−1 Gi/MxTemplate:Br(cm−1) GI=μ04π×109Gi/Mx1H1
Resistance Template:Mvar Ω s/cm RGRI=4πε01s/cm2.9982×1011Ω
Resistivity Template:Mvar Ωm s ρGρI=4πε01s2.9982×109Ωm
Capacitance Template:Mvar F cm CGCI=14πε02.9982×1011cm1F
Inductance Template:Mvar H s2/cm LGLI=4πε01s2/cm2.9982×1011H

Note: The SI quantities ε0 and μ0 satisfy Template:Tmath.

The conversion factors are written both symbolically and numerically. The numerical conversion factors can be derived from the symbolic conversion factors by dimensional analysis. For example, the top row says Template:Nowrap a relation which can be verified with dimensional analysis, by expanding ε0 and coulombs (C) in SI base units, and expanding statcoulombs (or franklins, Fr) in Gaussian base units.

It is surprising to think of measuring capacitance in centimetres. One useful example is that a centimetre of capacitance is the capacitance between a sphere of radius 1 cm in vacuum and infinity.

Another surprising unit is measuring resistivity in units of seconds. A physical example is: Take a parallel-plate capacitor, which has a "leaky" dielectric with permittivity 1 but a finite resistivity. After charging it up, the capacitor will discharge itself over time, due to current leaking through the dielectric. If the resistivity of the dielectric is Template:Mvar seconds, the half-life of the discharge is Template:Math seconds. This result is independent of the size, shape, and charge of the capacitor, and therefore this example illuminates the fundamental connection between resistivity and time units.

Dimensionally equivalent units

A number of the units defined by the table have different names but are in fact dimensionally equivalent – i.e., they have the same expression in terms of the base units cm, g, s. (This is analogous to the distinction in SI between newton-metre and joule.) The different names help avoid ambiguities and misunderstandings as to what physical quantity is being measured. In particular, Template:Em of the following quantities are dimensionally equivalent in Gaussian units, but they are nevertheless given different unit names as follows:[8]

Dimensionally equivalent units
Quantity Gaussian symbol In Gaussian
base units
Gaussian unit
of measure
Electric field Template:Math cm−1/2⋅g1/2⋅s−1 statV/cm
Electric displacement field Template:Math cm−1/2⋅g1/2⋅s−1 statC/cm2
Polarization density Template:Math cm−1/2⋅g1/2⋅s−1 statC/cm2
Magnetic flux density Template:Math cm−1/2⋅g1/2⋅s−1 G
Magnetizing field Template:Math cm−1/2⋅g1/2⋅s−1 Oe
Magnetization Template:Math cm−1/2⋅g1/2⋅s−1 dyn/Mx

General rules to translate a formula

Any formula can be converted between Gaussian and SI units by using the symbolic conversion factors from Table 1 above.

For example, the electric field of a stationary point charge has the ISQ formula 𝐄I=qI4πε0r2𝐫^, where Template:Mvar is distance, and the "Template:Smaller" superscript indicates that the electric field and charge are defined as in the ISQ. If we want the formula to instead use the Gaussian definitions of electric field and charge, we look up how these are related using Table 1, which says: 𝐄G𝐄I=4πε0,qGqI=14πε0.

Therefore, after substituting and simplifying, we get the Gaussian-system formula: 𝐄G=qGr2𝐫^, which is the correct Gaussian-system formula, as mentioned in a previous section.

For convenience, the table below has a compilation of the symbolic conversion factors from Table 1. To convert any formula from the Gaussian system to the ISQ using this table, replace each symbol in the Gaussian column by the corresponding expression in the SI column (vice versa to convert the other way). Replace 1/c2 by ε0μ0 (or vice versa). This will reproduce any of the specific formulas given in the list above, such as Maxwell's equations, as well as any other formula not listed.[9][10][11]Template:Efn

Table 2A: Replacement rules for translating formulas from Gaussian to ISQ
Name Gaussian system Template:Abbr
electric field, electric potential, electromotive force (𝐄G,φG,G) 4πε0(𝐄I,φI,I)
electric displacement field 𝐃G 4πε0𝐃I
charge, charge density, current,
current density, polarization density,
electric dipole moment
(qG,ρG,IG,𝐉G,𝐏G,𝐩G) 14πε0(qI,ρI,II,𝐉I,𝐏I,𝐩I)
[[Magnetic field|magnetic Template:Math field]], magnetic flux,
magnetic vector potential
(𝐁G,ΦmG,𝐀G) 4πμ0(𝐁I,ΦmI,𝐀I)
[[Magnetic field|magnetic Template:Math field]], magnetic scalar potential, magnetomotive force (𝐇G,ψG,G) 4πμ0(𝐇I,ψI,I)
magnetic moment, magnetization, magnetic pole strength (𝐦G,𝐌G,pG) μ04π(𝐦I,𝐌I,pI)
permittivity,
permeability
(εG,μG) (εIε0,μIμ0)
electric susceptibility,
magnetic susceptibility
(χeG,χmG) 14π(χeI,χmI)
conductivity, conductance, capacitance (σG,SG,CG) 14πε0(σI,SI,CI)
resistivity, resistance, inductance, memristance, impedance (ρG,RG,LG,MG,ZG) 4πε0(ρI,RI,LI,MI,ZI)
magnetic reluctance G μ0I
Table 2B: Replacement rules for translating formulas from ISQ to Gaussian
Name Template:Abbr Gaussian system
electric field, electric potential, electromotive force (𝐄I,φI,I) 14πε0(𝐄G,φG,G)
electric displacement field 𝐃I ε04π𝐃G
charge, charge density, current,
current density, polarization density,
electric dipole moment
(qI,ρI,II,𝐉I,𝐏I,𝐩I) 4πε0(qG,ρG,IG,𝐉G,𝐏G,𝐩G)
[[Magnetic field|magnetic Template:Math field]], magnetic flux,
magnetic vector potential
(𝐁I,ΦmI,𝐀I) μ04π(𝐁G,ΦmG,𝐀G)
[[Magnetic field|magnetic Template:Math field]], magnetic scalar potential, magnetomotive force (𝐇I,ψI,I) 14πμ0(𝐇G,ψG,G)
magnetic moment, magnetization, magnetic pole strength (𝐦I,𝐌I,pI) 4πμ0(𝐦G,𝐌G,pG)
permittivity,
permeability
(εI,μI) (ε0εG,μ0μG)
electric susceptibility,
magnetic susceptibility
(χeI,χmI) 4π(χeG,χmG)
conductivity, conductance, capacitance (σI,SI,CI) 4πε0(σG,SG,CG)
resistivity, resistance, inductance, memristance, impedance (ρI,RI,LI,MI,ZI) 14πε0(ρG,RG,LG,MG,ZG)
magnetic reluctance I 1μ0G

After the rules of the table have been applied and the resulting formula has been simplified, replace all combinations ε0μ0 by 1/c2.

Notes

Template:Notelist

References

Template:Reflist

Template:Carl Friedrich Gauss

  1. 1.0 1.1 1.2 "CGS", in How Many? A Dictionary of Units of Measurement, by Russ Rowlett and the University of North Carolina at Chapel Hill
  2. Template:SIbrochure8th, p. 128
  3. 3.0 3.1 3.2 Template:Cite web
  4. Kowalski, Ludwik, 1986, "A Short History of the SI Units in Electricity", Template:Webarchive The Physics Teacher 24(2): 97–99. Alternate web link (subscription required)
  5. A. Garg, 2012, "Classical Electrodynamics in a Nutshell" (Princeton University Press).
  6. Introduction to Electrodynamics by Capri and Panat, p180
  7. Template:Cite book
  8. Template:Cite book
  9. Template:Cite book
  10. Template:Cite web
  11. Template:Cite book