Revolute joint

A revolute joint (also called pin joint or hinge joint) is a one-degree-of-freedom kinematic pair used frequently in mechanisms and machines. The joint constrains the motion of two bodies to pure rotation along a common axis. The joint does not allow translation, or sliding linear motion, a constraint not shown in the diagram. Almost all assemblies of multiple moving bodies include revolute joints in their designs. Revolute joints are used in numerous applications such as door hinges, mechanisms, and other uni-axial rotation devices.

A revolute joint is usually made by a pin or knuckle joint, through a rotary bearing. It enforces a cylindrical contact area, which makes it a lower kinematic pair, also called a full joint. However, If there is any clearance between the pin and hole (as there must be for motion), so-called surface contact in the pin joint actually becomes line contact.

The contact between the inner and outer cylindrical surfaces is usually assumed to be frictionless. But some use simplified models assume linear viscous damping in the form $T=B\omega$, where Template:Mvar is the friction torque, Template:Mvar is the relative angular velocity, and Template:Mvar is the friction constant. Some more complex models take stiction and the Stribeck effect into consideration.

Template:Center

See also

• Cylindrical joint
• Kinematics
• Degrees of freedom (mechanics)
• Kinematic pair
• Mechanical joint
• Prismatic joint

References

Template:Classicalmechanics-stub