View source for Metal casting

{{Short description|Pouring liquid metal into a mold}}
[[File:Molten metal.jpg|thumb|Molten metal before casting]]
[[Image:casting.jpg|thumb|Casting iron in a sand mold]]

In [[metalworking]] and jewelry making, '''casting''' is a process in which a liquid metal is delivered into a [[Mold (manufacturing)|mold]] (usually by a [[crucible]]) that contains a negative impression (i.e., a three-dimensional negative image) of the intended shape. The metal is poured into the mold through a hollow channel called a [[Sprue (manufacturing)|sprue]]. The metal and mold are then cooled, and the metal part (the ''casting'') is extracted. Casting is most often used for making complex shapes that would be difficult or uneconomical to make by other methods.<ref>{{Harvnb|Degarmo|Black|Kohser|2003|p=277}}</ref>

Casting processes have been known for thousands of years, and have been widely used for [[sculpture]] (especially in [[bronze]]),  [[jewelry]] in [[precious metal]]s, and weapons and tools.  Highly engineered castings are found in 90 percent of durable goods, including cars, trucks, aerospace, trains, mining and construction equipment, oil wells, appliances, pipes, hydrants, wind turbines, [[nuclear plants]], medical devices, defense products, toys, and more.<ref>{{Cite web|url=https://www.afsinc.org/about-metalcasting|title=About Metalcasting &#124; American Foundry Society|access-date=2021-01-12|archive-date=2023-06-07|archive-url=https://web.archive.org/web/20230607083646/https://www.afsinc.org/about-metalcasting|url-status=live}}</ref>

Traditional techniques include [[lost-wax casting]] (which may be further divided into [[centrifugal casting (disambiguation)|centrifugal casting]], and [[vacuum assist direct pour]] casting), [[plaster mold casting]] and [[sand casting]].

The modern casting process is subdivided into two main categories: expendable and non-expendable casting. It is further broken down by the mold material, such as sand or metal, and pouring method, such as gravity, vacuum, or low pressure.<ref>{{Harvnb|Degarmo|Black|Kohser|2003|p=278}}</ref>

==Expendable mold casting==
Expendable mold casting is a generic classification that includes sand, plastic, shell, plaster, and investment (lost-wax technique) moldings. This method of mold casting involves the use of temporary, non-reusable molds.

[[File:Casting processes.svg|700px]]

===Sand casting===
{{Main article|Sand casting}}

Sand casting is one of the most popular and simplest types of casting, and has been used for centuries. Sand casting allows for smaller batches than permanent mold casting and at a very reasonable cost. Not only does this method allow manufacturers to create products at a low cost, but there are other benefits to sand casting, such as very small-size operations. The process allows for castings small enough fit in the palm of one's hand to those large enough for a train car bed (one casting can create the entire bed for one rail car). Sand casting also allows most metals to be cast depending on the type of sand used for the molds.<ref>{{harvnb|Schleg|Kohloff|Sylvia|American Foundry Society|2003}}, chapters 2–4.</ref>
[[File:Iron bell cooling after iron pour.jpg|left|thumb|Iron bell cooling after iron pour]]
[[File:Personal protective equipment to shield from radiant heat and molten splashes - zoomed in.jpg|left|thumb|Personal protective equipment to shield from radiant heat and molten splashes]]

Sand casting requires a lead time of days, or even weeks sometimes, for production at high output rates (1–20 pieces/hr-mold) and is unsurpassed for large-part production. Green (moist) sand, which is black in color, has almost no part weight limit, whereas dry sand has a practical part mass limit of {{convert|2300|-|2700|kg|lb|abbr=on}}. Minimum part weight ranges from {{convert|0.075|-|0.1|kg|lb|abbr=on}}. The sand is bonded using clays, chemical binders, or polymerized oils (such as motor oil). Sand can be recycled many times in most operations and requires little maintenance.

===Loam molding===
{{Main article|Loam molding}}
Loam molding has been used to produce large symmetrical objects such as cannon and church bells. Loam is a mixture of clay and sand with straw or dung. A model of the produced is formed in a friable material (the chemise). The mold is formed around this chemise by covering it with loam.  This is then baked (fired) and the chemise removed. The mold is then stood upright in a pit in front of the furnace for the molten metal to be poured. Afterwards the mold is broken off. Molds can thus only be used once, so that other methods are preferred for most purposes.

===Plaster mold casting===
{{Main article|Plaster mold casting}}

Plaster casting is similar to sand casting except that [[plaster of paris]] is used instead of sand as a mold material. Generally, the form takes less than a week to prepare, after which a production rate of 1–10&nbsp;units/hr-mold is achieved, with items as massive as {{convert|45|kg|lb|abbr=on}} and as small as {{convert|30|g|oz|abbr=on|0}} with very good [[surface finish]] and close [[Engineering tolerance|tolerances]].<ref name="met">{{harvnb|Kalpakjian|Schmid|2006}}.</ref> Plaster casting is an inexpensive alternative to other molding processes for complex parts due to the low cost of the plaster and its ability to produce [[near net shape]] castings. The biggest disadvantage is that it can only be used with low melting point non-ferrous materials, such as [[aluminium]], [[copper]], [[magnesium]], and [[zinc]].<ref>{{Harvnb|Degarmo|Black|Kohser|2003|p=315}}</ref>

===Shell molding===
{{Main article|Shell molding}}

Shell molding is similar to sand casting, but the molding cavity is formed by a hardened "shell" of sand instead of a flask filled with sand. The sand used is finer than sand casting sand and is mixed with a [[resin]] so that it can be heated by the pattern and hardened into a shell around the pattern. Because of the resin and finer sand, it gives a much finer surface finish. The process is easily automated and more precise than sand casting. Common metals that are cast include [[cast iron]], aluminium, magnesium, and copper alloys. This process is ideal for complex items that are small to medium-sized.

===Investment casting===
[[Image:Nuclear valve 01.jpg|frame|An investment-cast valve cover]]
{{Main article|Investment casting}}
{{See also|Lost-wax casting}}

Investment casting (known as [[lost-wax casting]] in art) is a process that has been practiced for thousands of years, with the lost-wax process being one of the oldest known metal forming techniques. From 5000 years ago, when [[beeswax]] formed the pattern, to today's high technology waxes, refractory materials, and specialist alloys, the castings ensure high-quality components are produced with the key benefits of accuracy, repeatability, versatility,  and integrity.

Investment casting derives its name from the fact that the pattern is invested, or surrounded, with a refractory material. The wax patterns require extreme care for they are not strong enough to withstand forces encountered during the mold making. One advantage of investment casting is that the wax can be reused.<ref name=met/>

The process is suitable for repeatable production of net shape components from a variety of different metals and high performance alloys. Although generally used for small castings, this process has been used to produce complete aircraft door frames, with [[steel]] castings of up to 300&nbsp;kg and [[aluminium]] castings of up to 30&nbsp;kg. Compared to other casting processes such as [[die casting]] or [[sand casting]], it can be an expensive process. However, the components that can be produced using investment casting can incorporate intricate contours, and in most cases the components are cast near net shape, so require little or no rework once cast.

===Waste molding of plaster===
{{Unreferenced section|date=February 2009}}

A durable plaster intermediate is often used as a stage toward the production of a bronze sculpture or as a pointing guide for the creation of a carved stone. With the completion of a plaster, the work is more durable (if stored indoors) than a clay original which must be kept moist to avoid cracking. With the low cost plaster at hand, the expensive work of [[bronze]] casting or stone carving may be deferred until a patron is found, and as such work is considered to be a technical, rather than artistic process, it may even be deferred beyond the lifetime of the artist.

In waste molding a simple and thin plaster mold, reinforced by sisal or burlap, is cast over the original clay mixture. When cured, it is then removed from the damp clay, incidentally destroying the fine details in undercuts present in the clay, but which are now captured in the mold. The mold may then at any later time (but only once) be used to cast a plaster positive image, identical to the original clay. The surface of this plaster may be further refined and may be painted and waxed to resemble a finished bronze casting.

===Evaporative-pattern casting===
{{Main article|Evaporative-pattern casting}}

This is a class of casting processes that use pattern materials that evaporate during the pour, which means there is no need to remove the pattern material from the mold before casting. The two main processes are lost-foam casting and full-mold casting.

====Lost-foam casting====
{{Main article|Lost-foam casting}}

Lost-foam casting is a type of evaporative-pattern casting process that is similar to investment casting except foam is used for the pattern instead of wax. This process takes advantage of the low [[boiling point]] of foam to simplify the investment casting process by removing the need to melt the wax out of the mold.

====Full-mold casting====
{{Main article|Full-mold casting}}

Full-mold casting is an evaporative-pattern casting process which is a combination of sand casting and [[lost-foam casting]]. It uses an [[expanded polystyrene]] foam pattern which is then surrounded by sand, much like sand casting. The metal is then poured directly into the mold, which vaporizes the foam upon contact.

==Non-expendable mold casting==
[[Image:Castingtinsoldiers.jpg|thumb|200px|upright|The permanent molding process]]

Non-expendable mold casting differs from expendable processes in that the mold need not be reformed after each production cycle. This technique includes at least four different methods: permanent, die, centrifugal, and continuous casting. This form of casting also results in improved repeatability in parts produced and delivers [[near net shape]] results.

===Permanent mold casting===
{{Main article|Permanent mold casting|low-pressure permanent mold casting|vacuum permanent mold casting}}

Permanent mold casting is a metal casting process that employs reusable [[Molding (process)|molds]] ("permanent molds"), usually made from [[metal]]. The most common process uses gravity to fill the mold. However, gas pressure or a [[vacuum]] are also used. A variation on the typical gravity casting process, called [[slush casting]], produces hollow castings. Common casting metals are [[aluminum]], [[magnesium]], and [[copper]] alloys. Other materials include [[tin]], [[zinc]], and [[lead]] alloys and [[iron]] and steel are also cast in [[graphite]] molds. Permanent molds, while lasting more than one casting still have a limited life before wearing out.<!-- See main article for references -->

===Die casting===
{{Main article|Die casting}}

The die casting process forces molten [[metal]] under high pressure into mold cavities (which are machined into dies). Most die castings are made from [[nonferrous metals]], specifically [[zinc]], copper, and aluminium-based alloys, but [[ferrous metal]] die castings are possible. The die casting method is especially suited for applications where many small to medium-sized parts are needed with good detail, a fine surface quality and dimensional consistency.<!-- See main article for references -->

===Semi-solid metal casting===
{{Main article|Semi-solid metal casting}}

Semi-solid metal (SSM) casting is a modified die casting process that reduces or eliminates the residual porosity present in most die castings. Rather than using liquid metal as the feed material, SSM casting uses a higher viscosity feed material that is partially solid and partially liquid. A modified die casting machine is used to inject the semi-solid slurry into reusable hardened steel dies. The high viscosity of the semi-solid metal, along with the use of controlled die filling conditions, ensures that the semi-solid metal fills the die in a non-turbulent manner so that harmful porosity can be essentially eliminated.

Used commercially mainly for aluminium and magnesium alloys, SSM castings can be heat treated to the T4, T5 or T6 tempers. The combination of heat treatment, fast cooling rates (from using uncoated steel dies) and minimal porosity provides excellent combinations of strength and ductility. Other advantages of SSM casting include the ability to produce complex shaped parts net shape, pressure tightness, tight dimensional tolerances and the ability to cast thin walls.<ref>10th International Conference Semi-Solid Processing of Alloys and Composites, Eds. G. Hirt, A. Rassili & A. Buhrig-Polaczek, Aachen Germany & Liege, Belgium, 2008</ref>

=== Centrifugal casting ===
{{Main article|Centrifugal casting (silversmithing)}}In this process molten metal is poured in the mold and allowed to solidify while the mold is rotating. Metal is poured into the center of the mold at its axis of rotation. Due to inertial force, the liquid metal is thrown out toward the periphery.

Centrifugal casting is both gravity and pressure independent since it creates its own force feed using a temporary sand mold held in a spinning chamber. Lead time varies with the application. Semi- and true-centrifugal processing permit 30–50 pieces/hr-mold to be produced, with a practical limit for batch processing of approximately 9000&nbsp;kg total mass with a typical per-item limit of 2.3–4.5&nbsp;kg.

Industrially, the centrifugal casting<ref>{{cite web |title=Centrifugal casting |url=https://eminentengitech.com/services/casting-manufacturer/ |website=Eminent Engitech |access-date=2022-05-09 |archive-date=2022-10-04 |archive-url=https://web.archive.org/web/20221004121735/https://eminentengitech.com/services/casting-manufacturer/ |url-status=live }}</ref> of railway wheels was an early application of the method developed by the [[Germany|German]] industrial company [[Krupp]] and this capability enabled the rapid growth of the enterprise.

Small art pieces such as jewelry are often cast by this method using the lost wax process, as the forces enable the rather viscous liquid metals to flow through very small passages and into fine details such as leaves and petals. This effect is similar to the benefits from vacuum casting, also applied to jewelry casting.

===Continuous casting===
{{Main article|Continuous casting}}

Continuous casting is a refinement of the casting process for the continuous, high-volume production of metal sections with a constant cross-section. It's primarily used to produce a semi-finished products for further processing.<ref>{{Cite book |title=Springer handbook of mechanical engineering |date=2021 |editor=Karl-Heinrich Grote |editor2=Hamid Hefazi |isbn=978-3-030-47035-7 |edition=2nd |location=Cham |publisher=Springer |oclc=1246246146}}</ref>{{Rp|page=339}}  Molten metal is poured into an open-ended, water-cooled mold, which allows a 'skin' of solid metal to form over the still-liquid center, gradually solidifying the metal from the outside in. After solidification, the strand, as it is sometimes called, is continuously withdrawn from the mold. Predetermined lengths of the strand can be cut off by either mechanical shears or traveling oxyacetylene torches and transferred to further forming processes, or to a stockpile. Cast sizes can range from strip (a few millimeters thick by about five meters wide) to billets (90 to 160&nbsp;mm square) to slabs (1.25 m wide by 230&nbsp;mm thick). Sometimes, the strand may undergo an initial [[hot rolling]] process before being cut.

Continuous casting is used due to the lower costs associated with continuous production of a standard product, and also increased quality of the final product. Metals such as steel, copper, aluminum and lead are continuously cast, with steel being the metal with the greatest tonnages cast using this method.

==== Upcasting ====
{{See also|Czochralski method}}
<!-- This subsection is linked from disambiguation page, leave anchor before renaming -->
The upcasting (up-casting, upstream, or upward casting) is a method of either vertical or horizontal continuous casting of rods and pipes of various profiles (cylindrical, square, hexagonal, slabs etc.) of 8-30mm in diameter.<ref name=":0">{{Cite web |title=Technologies of continuous casting: horizontal, vertical downward, vertical upward – KMM {{!}} bronze and brass foundry {{!}} vertical continuous casting |url=https://kmmbronze.com/technologies-of-continuous-casting-horizontal-vertical-downward-vertical-upward/ |archive-url=https://web.archive.org/web/20210307141606/https://kmmbronze.com/technologies-of-continuous-casting-horizontal-vertical-downward-vertical-upward/ |archive-date=March 7, 2021 |access-date=2022-05-05 |language=en-GB}}</ref>  [[Copper]] (Cu), [[bronze]] (Cu·[[Tin|Sn]] alloy), [[List of named alloys|nickel alloys]] are usually used because of greater casting speed (in case of vertical upcasting) and because of better physical features obtained. The advantage of this method is that metals are almost oxygen-free and that the rate of product crystallization (solidification) may be adjusted in a crystallizer - a high-temperature resistant device that cools a growing metal rod or pipe by using water.<ref name=":0" />

The method is comparable to [[Czochralski method]] of growing [[silicon]] (Si) crystals, which is a [[metalloid]].

==Terminology==
Metal casting processes uses the following terminology:<ref>{{Harvnb|Degarmo|Black|Kohser|2003|pp=278–279}}</ref>

*[[pattern (casting)|Pattern]]: An approximate duplicate of the final casting used to form the mold cavity.
*Molding material: The material that is packed around the pattern and then the pattern is removed to leave the cavity where the casting material will be poured.
*[[flask (casting)|Flask]]: The rigid wood or metal frame that holds the molding material.
**[[cope and drag|Cope]]: The top half of the pattern, flask, mold, or core.
**[[cope and drag|Drag]]: The bottom half of the pattern, flask, mold, or core.
*[[Core (manufacturing)|Core]]: An insert in the mold that produces internal features in the casting, such as holes.
**Core print: The region added to the pattern, core, or mold used to locate and support the core.
*Mold cavity: The combined open area of the molding material and core, where the metal is poured to produce the casting.
*[[riser (casting)|Riser]]: An extra void in the mold that fills with molten material to compensate for shrinkage during solidification.
*Gating system: The network of connected channels that deliver the molten material to the mold cavities.
**Pouring cup or pouring basin: The part of the gating system that receives the molten material from the pouring vessel.
**[[sprue (manufacturing)|Sprue]]: The pouring cup attaches to the sprue, which is the vertical part of the gating system. The other end of the sprue attaches to the runners.
**Runners: The horizontal portion of the gating system that connects the sprues to the gates.
**Gates: The controlled entrances from the runners into the mold cavities.
*Vents: Additional channels that provide an escape for gases generated during the pour.
*Parting line or parting surface: The interface between the cope and drag halves of the mold, flask, or pattern.
*[[draft (engineering)|Draft]]: The taper on the casting or pattern that allow it to be withdrawn from the mold
*Core box: The mold or die used to produce the cores. 
*Chaplet: Long vertical holding rod for core that after casting it become the integral part of casting, provide the support to the core.

Some specialized processes, such as die casting, use additional terminology.

==Theory==<!-- [[Metal casting theory]] redirects here -->
Casting is a [[solidification]] process, which means the solidification phenomenon controls most of the properties of the casting. Moreover, most of the casting defects occur during solidification, such as ''[[gas porosity (casting)|gas porosity]]'' and ''solidification shrinkage''.<ref>{{Harvnb|Degarmo|Black|Kohser|2003|pp=279–280}}</ref>

Solidification occurs in two steps: ''[[nucleation]]'' and ''[[crystal growth]]''. In the nucleation stage, solid particles form within the liquid. When these particles form, their [[internal energy]] is lower than the surrounded liquid, which creates an energy interface between the two. The formation of the surface at this interface requires energy, so as nucleation occurs, the material actually undercools (i.e. cools below its solidification temperature) because of the extra energy required to form the interface surfaces. It then recalescences, or heats back up to its solidification temperature, for the crystal growth stage. Nucleation occurs on a pre-existing solid surface because not as much energy is required for a partial interface surface as for a complete spherical interface surface. This can be advantageous because fine-grained castings possess better properties than coarse-grained castings. A fine grain structure can be induced by ''[[grain refinement]]'' or ''inoculation'', which is the process of adding impurities to induce nucleation.<ref name="degarmo280">{{Harvnb|Degarmo|Black|Kohser|2003|p=280}}</ref>

All of the nucleations represent a crystal, which grows as the [[heat of fusion]] is extracted from the liquid until there is no liquid left. The direction, rate, and type of growth can be controlled to maximize the properties of the casting. [[Directional solidification]] is when the material solidifies at one end and proceeds to solidify to the other end; this is the most ideal type of grain growth because it allows liquid material to compensate for shrinkage.<ref name="degarmo280"/>

===Cooling curves===
[[Image:Dendrite formation.gif|thumb|300px|Intermediate cooling rates from melt result in a dendritic microstructure. Primary and secondary dendrites can be seen in this image.]]
{{See also|Cooling curves}}

Cooling curves are important in controlling the quality of a casting. The most important part of the cooling curve is the ''cooling rate'' which affects the microstructure and properties. Generally speaking, an area of the casting which is cooled quickly will have a fine grain structure and an area which cools slowly will have a coarse grain structure. Below is an example cooling curve of a pure metal or [[eutectic]] alloy, with defining terminology.<ref>{{Harvnb|Degarmo|Black|Kohser|2003|pp=280–281}}</ref>

[[File:Cooling curve pure metal.svg|500px]]

Note that before the thermal arrest the material is a liquid and after it the material is a solid; during the thermal arrest the material is converting from a liquid to a solid. Also, note that the greater the superheat the more time there is for the liquid material to flow into intricate details.<ref>{{Harvnb|Degarmo|Black|Kohser|2003|p=281}}</ref>

The above cooling curve depicts a basic situation with a pure metal, however, most castings are of alloys, which have a cooling curve shaped as shown below.

[[File:Cooling curve alloy.svg|900px]]

Note that there is no longer a thermal arrest, instead there is a freezing range. The freezing range corresponds directly to the liquidus and solidus found on the [[phase diagram]] for the specific alloy.

===Chvorinov's rule===
{{Main article|Chvorinov's rule}}

The local solidification time can be calculated using Chvorinov's rule, which is:

:<math>t = B \left( \frac{V}{A} \right)^n</math>

Where ''t'' is the solidification time, ''V'' is the [[volume]] of the casting, ''A'' is the [[surface area]] of the casting that contacts the [[molding (process)|mold]], ''n'' is a constant, and ''B'' is the mold constant. It is most useful in determining if a riser will solidify before the casting, because if the riser does solidify first then it is worthless.<ref name="degarmo282">{{Harvnb|Degarmo|Black|Kohser|2003|p=282}}</ref>

===The gating system===<!-- [[Runner (casting)]] and [[Gate (casting)]] redirect here -->
[[File:Casting gating system.svg|thumb|right|400px|A simple gating system for a horizontal parting mold.]]
{{See also|Sprue (manufacturing)}}

The gating system serves many purposes, the most important being conveying the liquid material to the mold, but also controlling shrinkage, the speed of the liquid, turbulence, and trapping [[dross]]. The gates are usually attached to the thickest part of the casting to assist in controlling shrinkage. In especially large castings multiple gates or runners may be required to introduce metal to more than one point in the mold cavity. The speed of the material is important because if the material is traveling too slowly it can cool before completely filling, leading to misruns and cold shuts. If the material is moving too fast then the liquid material can erode the mold and contaminate the final casting. The shape and length of the gating system can also control how quickly the material cools; short round or square channels minimize heat loss.<ref name="degarmo284">{{Harvnb|Degarmo|Black|Kohser|2003|p=284}}</ref>

The gating system may be designed to minimize turbulence, depending on the material being cast. For example, steel, cast iron, and most copper alloys are turbulent insensitive, but aluminium and magnesium alloys are turbulent sensitive. The turbulent insensitive materials usually have a short and open gating system to fill the mold as quickly as possible. However, for turbulent sensitive materials short sprues are used to minimize the distance the material must fall when entering the mold. Rectangular pouring cups and tapered sprues are used to prevent the formation of a vortex as the material flows into the mold; these vortices tend to suck gas and oxides into the mold. A large sprue well is used to dissipate the kinetic energy of the liquid material as it falls down the sprue, decreasing turbulence. The ''choke'', which is the smallest cross-sectional area in the gating system used to control flow, can be placed near the sprue well to slow down and smooth out the flow. Note that on some molds the choke is still placed on the gates to make separation of the part easier, but induces extreme turbulence.<ref name="degarmo285">{{Harvnb|Degarmo|Black|Kohser|2003|p=285}}</ref> The gates are usually attached to the bottom of the casting to minimize turbulence and splashing.<ref name="degarmo284"/>

The gating system may also be designed to trap dross. One method is to take advantage of the fact that some dross has a lower density than the base material so it floats to the top of the gating system. Therefore, long flat runners with gates that exit from the bottom of the runners can trap dross in the runners; note that long flat runners will cool the material more rapidly than round or square runners. For materials where the dross is a similar density to the base material, such as aluminium, ''runner extensions'' and ''runner wells'' can be advantageous. These take advantage of the fact that the dross is usually located at the beginning of the pour, therefore the runner is extended past the last gate(s) and the contaminates are contained in the wells. Screens or filters may also be used to trap contaminates.<ref name="degarmo285"/>

It is important to keep the size of the gating system small, because it all must be cut from the casting and remelted to be reused. The efficiency, or ''{{visible anchor|yield}}'', of a casting system can be calculated by dividing the weight of the casting by the weight of the metal poured. Therefore, the higher the number the more efficient the gating system/risers.<ref name="degarmo287"/>

===Shrinkage===
There are three types of shrinkage: ''shrinkage of the liquid'', ''solidification shrinkage'' and ''patternmaker's shrinkage''. The shrinkage of the liquid is rarely a problem because more material is flowing into the mold behind it. Solidification shrinkage occurs because metals are less dense as a liquid than a solid, so during solidification the metal density dramatically increases. Patternmaker's shrinkage refers to the shrinkage that occurs when the material is cooled from the solidification temperature to room temperature, which occurs due to [[thermal contraction]].<ref>{{Harvnb|Degarmo|Black|Kohser|2003|pp=285–286}}</ref>

====Solidification shrinkage====
{| class="wikitable" align="right"
|+ Solidification shrinkage of various metals<ref name="degarmo286"/><ref>{{harvnb|Stefanescu|2008|p=66}}.</ref>
! Metal !! Percentage
|-
| Aluminium || 6.6
|-
| Copper || 4.9
|-
| Magnesium || 4.0 or 4.2
|-
| Zinc || 3.7 or 6.5
|-
| Low carbon steel || 2.5–3.0
|-
| High carbon steel || 4.0
|-
| White cast iron || 4.0–5.5
|-
| Gray cast iron || −2.5–1.6
|-
| Ductile cast iron || −4.5–2.7
|}

Most materials shrink as they solidify, but, as the adjacent table shows, a few materials do not, such as [[gray cast iron]]. For the materials that do shrink upon solidification the type of shrinkage depends on how wide the freezing range is for the material. For materials with a narrow freezing range, less than {{convert|50|C|abbr=on}},<ref name="stefanescu67">{{harvnb|Stefanescu|2008|p=67}}.</ref> a cavity, known as a ''pipe'', forms in the center of the casting, because the outer shell freezes first and progressively solidifies to the center. Pure and eutectic metals usually have narrow solidification ranges. These materials tend to form a ''skin'' in open air molds, therefore they are known as ''skin forming alloys''.<ref name="stefanescu67"/> For materials with a wide freezing range, greater than {{convert|110|C|abbr=on}},<ref name="stefanescu67"/> much more of the casting occupies the ''mushy'' or ''slushy'' zone (the temperature range between the solidus and the liquidus), which leads to small pockets of liquid trapped throughout and ultimately porosity. These castings tend to have poor [[ductility]], [[toughness]], and [[fatigue (material)|fatigue]] resistance. Moreover, for these types of materials to be fluid-tight, a secondary operation is required to impregnate the casting with a lower melting point metal or resin.<ref name="degarmo286"/><ref>{{Citation | last1 = Porter | first1 = David A. | last2 = Easterling | first2 = K. E. | title = Phase transformations in metals and alloys | page = 236 | publisher = CRC Press | year = 2000 | edition = 2nd | url = https://books.google.com/books?id=eYR5Re5tZisC | isbn = 978-0-7487-5741-1}}.</ref>

For the materials that have narrow solidification ranges, pipes can be overcome by designing the casting to promote directional solidification, which means the casting freezes first at the point farthest from the gate, then progressively solidifies toward the gate. This allows a continuous feed of liquid material to be present at the point of solidification to compensate for the shrinkage. Note that there is still a shrinkage void where the final material solidifies, but if designed properly, this will be in the gating system or riser.<ref name="degarmo286">{{Harvnb|Degarmo|Black|Kohser|2003|p=286}}</ref>
{{Clear}}

====Risers and riser aids====
[[File:Casting riser types.svg|thumb|right|400px|Different types of risers]]
{{Main article|Riser (casting)|chill (casting)}}

Risers, also known as ''feeders'', are the most common way of providing directional solidification. It supplies liquid metal to the solidifying casting to compensate for solidification shrinkage. For a riser to work properly the riser must solidify after the casting, otherwise it cannot supply liquid metal to shrinkage within the casting. Risers add cost to the casting because it lowers the ''yield'' of each casting; i.e. more metal is lost as scrap for each casting. Another way to promote directional solidification is by adding chills to the mold. A chill is any material which will conduct heat away from the casting more rapidly than the material used for molding.<ref>{{harvnb|Degarmo|Black|Kohser|2003|pp=286–288}}.</ref>

Risers are classified by three criteria. The first is if the riser is open to the atmosphere, if it is then it is called an ''open'' riser, otherwise it is known as a ''blind'' type. The second criterion is where the riser is located; if it is located on the casting then it is known as a ''top riser'' and if it is located next to the casting it is known as a ''side riser''. Finally, if the riser is located on the gating system so that it fills after the molding cavity, it is known as a ''live riser'' or ''hot riser'', but if the riser fills with materials that have already flowed through the molding cavity it is known as a ''dead riser'' or ''cold riser''.<ref name="degarmo287">{{Harvnb|Degarmo|Black|Kohser|2003|p=287}}</ref>

Riser aids are items used to assist risers in creating directional solidification or reducing the number of risers required. One of these items are ''chills'' which accelerate cooling in a certain part of the mold. There are two types: external and internal chills. External chills are masses of high-heat-capacity and high-thermal-conductivity material that are placed on an edge of the molding cavity. Internal chills are pieces of the same metal that is being poured, which are placed inside the mold cavity and become part of the casting. Insulating sleeves and toppings may also be installed around the riser cavity to slow the solidification of the riser. Heater coils may also be installed around or above the riser cavity to slow solidification.<ref name="degarmo288">{{Harvnb|Degarmo|Black|Kohser|2003|p=288}}</ref>
{{Clear}}

====Patternmaker's shrink====
{| class="wikitable" align="right"
|+ Typical patternmaker's shrinkage of various metals<ref name="degarmo289"/>
! Metal !! Percentage !! in/ft
|-
| Aluminium || 1.0–1.3 || {{Frac|1|8}}–{{Frac|5|32}}
|-
| Brass || 1.5 || {{Frac|3|16}}
|-
| Magnesium || 1.0–1.3 || {{Frac|1|8}}–{{Frac|5|32}}
|-
| Cast iron || 0.8–1.0 || {{Frac|1|10}}–{{Frac|1|8}}
|-
| Steel || 1.5–2.0 || {{Frac|3|16}}–{{Frac|1|4}}
|}

Shrinkage after solidification can be dealt with by using an oversized pattern designed specifically for the alloy used. ''{{visible anchor|Contraction rule}}s'', or ''{{visible anchor|shrink rule}}s'', are used to make the patterns oversized to compensate for this type of shrinkage.<ref name="degarmo289">{{Harvnb|Degarmo|Black|Kohser|2003|p=289}}</ref> These rulers are up to 2.5% oversize, depending on the material being cast.<ref name="degarmo288"/>  These rulers are mainly referred to by their percentage change. A pattern made to match an existing part would be made as follows:  First, the existing part would be measured using a standard ruler, then when constructing the pattern, the pattern maker would use a contraction rule, ensuring that the casting would contract to the correct size.

Note that patternmaker's shrinkage does not take phase change transformations into account. For example, eutectic reactions, [[martensitic]] reactions, and [[graphitization]] can cause expansions or contractions.<ref name="degarmo289"/>

===Mold cavity===
The mold cavity of a casting does not reflect the exact dimensions of the finished part due to a number of reasons. These modifications to the mold cavity are known as ''allowances'' and account for patternmaker's shrinkage, draft, machining, and distortion. In non-expendable processes, these allowances are imparted directly into the permanent mold, but in expendable mold processes they are imparted into the patterns, which later form the mold cavity.<ref name="degarmo289"/> Note that for non-expendable molds an allowance is required for the dimensional change of the mold due to heating to operating temperatures.<ref name="degarmo290"/>

For surfaces of the casting that are perpendicular to the parting line of the mold a draft must be included. This is so that the casting can be released in non-expendable processes or the pattern can be released from the mold without destroying the mold in expendable processes. The required draft angle depends on the size and shape of the feature, the depth of the mold cavity, how the part or pattern is being removed from the mold, the pattern or part material, the mold material, and the process type. Usually the draft is not less than 1%.<ref name="degarmo289"/>

The machining allowance varies drastically from one process to another. Sand castings generally have a rough surface finish, therefore need a greater machining allowance, whereas die casting has a very fine surface finish, which may not need any machining tolerance. Also, the draft may provide enough of a machining allowance to begin with.<ref name="degarmo290">{{Harvnb|Degarmo|Black|Kohser|2003|p=290}}</ref>

The distortion allowance is only necessary for certain geometries. For instance, U-shaped castings will tend to distort with the legs splaying outward, because the base of the shape can contract while the legs are constrained by the mold. This can be overcome by designing the mold cavity to slope the leg inward to begin with. Also, long horizontal sections tend to sag in the middle if ribs are not incorporated, so a distortion allowance may be required.<ref name="degarmo290"/>

Cores may be used in expendable mold processes to produce internal features. The core can be of metal but it is usually done in sand.<!-- This topic needs expansion -->

===Filling{{anchor|Filling}}===
[[File:Low pressure permanent mold casting schematic.svg|thumb|300px|upright|Schematic of the low-pressure permanent mold casting process]]
{{Expand section|date=February 2010}}

There are a few common methods for filling the mold cavity: ''gravity'', ''low-pressure'', ''high-pressure'', and ''vacuum''.<ref name="degarmo319"/>

Vacuum filling, also known as ''counter-gravity'' filling, is more metal efficient than gravity pouring because less material solidifies in the gating system. Gravity pouring only has a 15 to 50% metal yield as compared to 60 to 95% for vacuum pouring. There is also less turbulence, so the gating system can be simplified since it does not have to control turbulence. Plus, because the metal is drawn from below the top of the pool the metal is free from [[dross]] and slag, as these are lower density (lighter) and float to the top of the pool. The pressure differential helps the metal flow into every intricacy of the mold. Finally, lower temperatures can be used, which improves the grain structure.<ref name="degarmo319">{{harvnb|Degarmo|Black|Kohser|2003|pp=319–320}}.</ref> The first patented vacuum casting machine and process dates to 1879.<ref>{{Citation | last = [[Iron and Steel Institute]] | title = Journal of the Iron and Steel Institute | page = 547 | publisher = Iron and Steel Institute | year = 1912 | volume = 86 | url = https://books.google.com/books?id=Bz8ZAQAAIAAJ&pg=RA2-PA547 | postscript =.}}</ref>

Low-pressure filling uses 5 to 15&nbsp;psig (35 to 100&nbsp;kPag) of air pressure to force liquid metal up a feed tube into the mold cavity. This eliminates turbulence found in gravity casting and increases density, repeatability, tolerances, and grain uniformity. After the casting has solidified the pressure is released and any remaining liquid returns to the crucible, which increases yield.<ref>{{Citation | last = Lesko | first = Jim | title = Industrial design | page = 39 | publisher = John Wiley and Sons | year = 2007 | edition = 2nd | url = https://books.google.com/books?id=1_3snz7LgiMC&pg=PA39 | isbn = 978-0-470-05538-0 | postscript =.}}</ref>

====Tilt filling{{Anchor|Tilt casting}}====
''Tilt filling'', also known as ''tilt casting'', is an uncommon filling technique where the crucible is attached to the gating system and both are slowly rotated so that the metal enters the mold cavity with little turbulence. The goal is to reduce porosity and inclusions by limiting turbulence. For most uses tilt filling is not feasible because the following inherent problem: if the system is rotated slow enough to not induce turbulence, the front of the metal stream begins to solidify, which results in mis-runs. If the system is rotated faster it induces turbulence, which defeats the purpose. [[Durville (metallurgist)|Durville]] of France was the first to try tilt casting, in the 1800s. He tried to use it to reduce surface defects when casting coinage from [[aluminium bronze]].<ref>{{Citation | last = Campbell | first = John | title = Castings practice: the 10 rules of castings | pages = 69–71 | publisher = Butterworth-Heinemann | year = 2004 | url = https://books.google.com/books?id=MS-JFA04n0QC&pg=PA69 | isbn = 978-0-7506-4791-5 | postscript =.}}</ref>

===Macrostructure===
The grain macrostructure in ingots and most castings have three distinct regions or zones: the chill zone, columnar zone, and equiaxed zone. The image below depicts these zones.

[[File:Cast ingot macrostructure.svg|500px]]

The chill zone is named so because it occurs at the walls of the mold where the wall ''chills'' the material. Here is where the nucleation phase of the solidification process takes place. As more heat is removed the grains grow towards the center of the casting. These are thin, long ''columns'' that are perpendicular to the casting surface, which are undesirable because they have [[anisotropic]] properties. Finally, in the center the equiaxed zone contains spherical, randomly oriented crystals. These are desirable because they have [[isotropic]] properties. The creation of this zone can be promoted by using a low pouring temperature, alloy inclusions, or [[wikt:inoculant|inoculants]].<ref name="degarmo282"/>

===Inspection===
Common inspection methods for steel castings are ''[[magnetic particle inspection|magnetic particle testing]]'' and ''[[liquid penetrant testing]]''.<ref>{{harvnb|Blair|Stevens|1995|p=4‐6<!-- This is not a range! -->}}.</ref> Common inspection methods for aluminum castings are ''[[industrial radiography|radiography]]'', ''[[ultrasonic testing]]'', and ''liquid penetrant testing''.<ref>{{harvnb|Kissell|Ferry|2002|p=73}}.</ref>

====Defects====
{{Main article|Casting defects}}

There are a number of problems that can be encountered during the casting process. The main types are: ''gas porosity'', ''shrinkage defects'', ''mold material defects'', ''pouring metal defects'', and ''metallurgical defects''.

==Casting process simulation==
[[File:Poligonsoft casting.jpg|thumb|A high-performance [[software]] for the simulation of casting processes provides opportunities for an interactive or automated evaluation of results (here, for example, of mold filling and solidification, [[porosity]] and flow characteristics).]]
[[:es:Modelado de procesos de fundición|Casting processes simulation]] uses [[numerical analysis|numerical methods]] to calculate cast component quality considering mold filling, [[solidification]] and cooling, and provides a quantitative prediction of casting mechanical properties, [[thermal stress|thermal stresses]] and distortion. Simulation accurately describes a cast component's quality up-front before production starts. The casting rigging can be designed with respect to the required component properties. This has benefits beyond a reduction in pre-production sampling, as the precise layout of the complete casting system also leads to [[energy]], material, and tooling savings.

The software supports the user in component design, the determination of melting practice and casting methoding through to pattern and mold making, [[heat treating|heat treatment]], and finishing. This saves costs along the entire casting manufacturing route.

Casting process simulation was initially developed at universities starting from the early [[70s|1970s]], mainly in Europe and in the U.S., and is regarded as the most important innovation in casting technology over the last 50 years. Since the late [[80s|1980s]], commercial programs are available which make it possible for foundries to gain new insight into what is happening inside the mold or die during the casting process.<ref>{{Cite journal |author=N. Hansen |author2=Erwin Flender |author3=Jörg C. Sturm |date=April 2010 |title=Thirty Years of Casting Process Simulation |journal=International Journal of Metalcasting |language=en |volume=4 |issue=2 |pages=7–23 |doi=10.1007/BF03355463}}</ref>

==See also==
{{Portal| Engineering }}
*[[Bronze and brass ornamental work]]
*[[Bronze sculpture]]
*[[Forging]]
*[[Foundry]]
*[[Porosity sealing]]
*[[Spin casting]]
*[[Spray forming]]
*[[Stone mould]]

==References==

===Notes===
{{Reflist|30em}}

===Bibliography===
*{{Citation | last1 = Blair  | first1 = Malcolm | last2 = Stevens | first2 = Thomas L. | title = Steel castings handbook | publisher = ASM International | year = 1995 | edition = 6th | url = https://books.google.com/books?id=QG3_QqmPZ_AC | isbn = 978-0-87170-556-3 | postscript =.}}
*{{Citation | last1 = Degarmo | first1 = E. Paul | last2 = Black | first2 = J T. | last3 = Kohser | first3 = Ronald A. | title = Materials and Processes in Manufacturing | publisher = Wiley | year = 2003 | edition = 9th | isbn = 0-471-65653-4}}.
*{{Citation | last1 = Kalpakjian | first1 = Serope | last2 = Schmid | first2 = Steven | title = Manufacturing Engineering and Technology | publisher = Pearson | year = 2006 | edition = 5th | isbn = 0-13-148965-8}}.
*{{Citation | last1 = Kissell | first1 = J. Randolph | last2 = Ferry | first2 = Robert L. | title = Aluminum structures: a guide to their specifications and design | publisher = John Wiley and Sons | year = 2002 | edition = 2nd | url = https://books.google.com/books?id=NJh8Y9bV-hEC | isbn = 978-0-471-01965-7 | postscript =.}}
*{{Citation | last1 = Schleg | first1 = Frederick P. | last2 = Kohloff | first2 = Frederick H. | last3 = Sylvia | first3 = J. Gerin | last4 = American Foundry Society | title = Technology of Metalcasting | publisher = American Foundry Society | year = 2003 | isbn = 978-0-87433-257-5}}.
*{{Citation | last = Stefanescu | first = Doru Michael | title = Science and Engineering of Casting Solidification | publisher = Springer | year = 2008 | edition = 2nd | url = https://books.google.com/books?id=JVTJi30phCwC | isbn = 978-0-387-74609-8}}.
*{{Citation | last = Ravi | first = B | title = Metal Casting: Computer-aided Design and Analysis | publisher = PHI | year = 2010 | edition = 1st | url = https://books.google.com/books?id=d_A2o4YXfUAC | isbn = 978-81-203-2726-9}}.

==External links==
{{Commons|Casting}}
{{EB1911 poster|Founding}}
*[http://www.sfsa.org/tutorials/ Interactive casting design/manufacturing examples] {{Webarchive|url=https://web.archive.org/web/20200609092605/https://www.sfsa.org/tutorials/ |date=2020-06-09 }}
*[https://web.archive.org/web/20071010032149/http://www.sfsa.org/sfsa/pubs/cvf/ecs.html Castings or Forgings? A look at the advantages of each manufacturing process]
*[https://web.archive.org/web/20151210223620/https://www.ameslab.gov/mpc/video Video clip of a 50 gram arc cast alloy solidifying]

{{Metalworking navbox|castopen}}
{{Jewellery}}
{{Authority control}}

{{DEFAULTSORT:Casting (Metalworking)}}
[[Category:Casting (manufacturing)| Metalworking]]
[[Category:Jewellery making]]
[[Category:History of metallurgy]]
[[Category:Metallurgy]]
[[Category:Sculpture techniques]]

[[es:Fundición]]
[[hr:Lijevanje]]
[[pt:Fundição]]