View source for Haber process

{{Short description|Industrial process for ammonia production}}
{{Lead too short|date=November 2023}}
{{Use dmy dates|date=March 2023}}
[[File:Fritz Haber.png|thumb|upright=0.7|[[Fritz Haber]], 1918]]
The '''Haber process''',<ref>{{Cite book |title=Habers process chemistry |publisher=Arihant publications |year=2018 |isbn=978-93-131-6303-9 |location=India |pages=264}}</ref> also called the '''Haber–Bosch process''', is the main industrial procedure for the [[ammonia production|production of ammonia]].<ref>{{Cite book |last=Appl |first=M. |title=A Century of Chemical Engineering |publisher=Plenum Press |year=1982 |isbn=978-0-306-40895-3 |location=New York |pages=29–54 |chapter=The Haber–Bosch Process and the Development of Chemical Engineering}}</ref><ref name="Appl">{{Ullmann |first=Max |last=Appl |title=Ammonia |doi=10.1002/14356007.a02_143.pub2 |year=2006}}</ref> It converts atmospheric [[nitrogen]] (N<sub>2</sub>) to [[ammonia]] (NH<sub>3</sub>) by a reaction with [[hydrogen]] (H<sub>2</sub>) using finely divided [[iron]] metal as a catalyst:

<math chem="">\ce{N2 + 3H2 <=> 2NH3} \qquad {\Delta H^\circ_\mathrm{298~K} = -92.28~\ce{kJ/mol}}</math>

This reaction is thermodynamically favorable at room temperature, but the kinetics are prohibitively slow. At high temperatures at which catalysts are active enough that the reaction proceeds to equilibrium, the reaction is reactant-favored rather than product-favored. As a result, high pressures are needed to [[Le_Chatelier's_principle|drive the reaction forward]]. 

The German chemists [[Fritz Haber]] and [[Carl Bosch]] developed the process in the first decade of the 20th century, and its improved efficiency over existing methods such as the [[Birkeland–Eyde process|Birkeland-Eyde]] and [[Frank–Caro process|Frank-Caro]] processes was a major advancement in the industrial production of ammonia.<ref name="Smil_2004_Enriching">{{Cite book |last=Smil |first=Vaclav |title=Enriching the Earth: Fritz Haber, Carl Bosch, and the Transformation of World Food Production |date=2004 |publisher=MIT |isbn=978-0-262-69313-4 |edition=1st |location=Cambridge, MA}}</ref><ref name="hager">{{Cite book |last=Hager |first=Thomas |title=The Alchemy of Air: A Jewish genius, a doomed tycoon, and the scientific discovery that fed the world but fueled the rise of Hitler |date=2008 |publisher=Harmony Books |isbn=978-0-307-35178-4 |edition=1st |location=New York, New York}}</ref><ref>{{Cite book |last=Sittig |first=Marshall |title=Fertilizer Industry: Processes, Pollution Control, and Energy Conservation |date=1979 |publisher=Noyes Data Corp. |isbn=978-0-8155-0734-5 |location=Park Ridge, New Jersey}}</ref> The Haber process can be combined with [[steam reforming]] to produce ammonia with just three chemical inputs: water, natural gas, and atmospheric nitrogen. Both Haber and Bosch were eventually awarded the [[List_of_Nobel_laureates_in_Chemistry|Nobel Prize in Chemistry]]: Haber in 1918 for ammonia synthesis specifically, and Bosch in 1931 for related contributions to [[high-pressure chemistry]].

== History ==
{{main|History of the Haber process}}
[[File:1908 Carl Bosch (1874-1940).jpg|thumb|upright=0.7|[[Carl Bosch]], 1927]]
During the 19th century, the demand rapidly increased for nitrates and ammonia for use as fertilizers, which supply plants with the nutrients they need to grow, and for industrial feedstocks. The main source was mining [[niter]] deposits and [[guano]] from tropical islands.<ref name="Vandermeer">{{Cite book |last=Vandermeer |first=John |url={{google books |plainurl=y |id=AFRQSuQGHiIC}} |title=The Ecology of Agroecosystems |date=2011 |publisher=Jones & Bartlett Learning |isbn=978-0-7637-7153-9 |page=149}}</ref> At the beginning of the 20th century these reserves were thought insufficient to satisfy future demands,<ref>{{Cite book |last=James |first=Laylin K. |url=https://archive.org/details/isbn_9780841226906/page/118 |title=Nobel Laureates in Chemistry 1901–1992 |date=1993 |publisher=American Chemical Society |isbn=978-0-8412-2690-6 |edition=3rd |location=Washington, DC |page=[https://archive.org/details/isbn_9780841226906/page/118 118]}}</ref> and research into new potential sources of ammonia increased. Although atmospheric nitrogen (N<sub>2</sub>) is abundant, comprising ~78% of the air, it is exceptionally stable and does not readily react with other chemicals.

Haber, with his assistant [[Robert Le Rossignol]]{{Citation needed|reason=One citation does not even have Roberts name in it if his trail to the lectures is followed, the other situation leads to a opinion piece by a University college london that has no citation in his claims. Claims such as working on and or during the ammonia have no citations. The idea that it was just robert and Haber working together on the project was less likely than haber having a team not a single man makes the need for more citation work. |date=November 2024}}, developed the high-pressure devices and [[catalysts]] needed to demonstrate the Haber process at a laboratory scale.<ref>{{Cite book |last=Haber |first=Fritz |url=https://archive.org/details/thermodynamikte00habegoog |title=Thermodynamik technischer Gasreaktionen |date=1905 |publisher=Salzwasser Verlag |isbn=978-3-86444-842-3 |edition=1st |location=Paderborn |language=de}}</ref><ref>{{Citation |title=Robert Le Rossignol, 1884–1976: Professional Chemist |url=http://www.ucl.ac.uk/chemistry/alumni/documents/A5booklet_020909.pdf |work=ChemUCL Newsletter |page=8 |year=2009 |archive-url=https://web.archive.org/web/20110113022251/http://www.ucl.ac.uk/chemistry/alumni/documents/A5booklet_020909.pdf |url-status=dead |archive-date=13 January 2011}}.</ref> They demonstrated their process in the summer of 1909 by producing ammonia from the air, drop by drop, at the rate of about {{convert|125|mL|USoz|sigfig=1|abbr=on}} per hour<!--a cup every two hours-->. The process was purchased by the German chemical company [[BASF]], which assigned [[Carl Bosch]] the task of scaling up Haber's tabletop machine to industrial scale.<ref name="hager" /><ref>Bosch, Carl (2 March 1908). {{US Patent|990191}}.</ref> He succeeded in 1910. Haber and Bosch were later awarded Nobel Prizes, in 1918 and 1931 respectively, for their work in overcoming the chemical and engineering problems of large-scale, continuous-flow, high-pressure technology.<ref name="hager" />

Ammonia was first manufactured using the Haber process on an industrial scale in 1913 in BASF's [[Ludwigshafen#Oppau|Oppau]] plant in Germany, reaching 20 tonnes/day in 1914.<ref name="AmSci">{{Cite journal |last=Philip |first=Phylis Morrison |year=2001 |title=Fertile Minds (Book Review of ''Enriching the Earth: Fritz Haber, Carl Bosch, and the Transformation of World Food Production'') |url=http://www.americanscientist.org/bookshelf/pub/from-fertile-minds |journal=American Scientist |language=en |archive-url=https://web.archive.org/web/20120702093415/http://www.americanscientist.org/bookshelf/pub/from-fertile-minds |archive-date=2 July 2012}}</ref> During [[World War I]], the production of [[munitions]] required large amounts of nitrate. The [[Allies of World War I|Allied powers]] had access to large deposits of [[sodium nitrate]] in Chile (Chile [[saltpetre]]) controlled by British companies. India had large supplies too, but it was also controlled by the British.<ref name="Brown_2011">{{cite book|last1=Brown|first1=GI|title= Explosives: History with a Bang |date=2011|publisher=The History Press |location= |isbn= 978-0752456966|page=|edition=1|url=https://books.google.com/books?id=PFM7AwAAQBAJ&dq=India,+especially+the+states+of+Bihar+and+Bengal,+was+one+of+the+largest++suppliers,+exporting+around+30,000+tons+of+saltpetre&pg=PT20}}</ref> Moreover, even if German commercial interests had nominal legal control of such resources, the Allies controlled the sea lanes and imposed a highly effective [[blockade]] which would have prevented such supplies from reaching Germany. The Haber process proved so essential to the German war effort<ref name="hager" /><ref name="ny times">{{Cite news |date=3 February 1920 |title=Nobel Award to Haber |work=[[The New York Times]] |url=https://timesmachine.nytimes.com/timesmachine/1920/02/03/118255924.pdf |url-status=dead |access-date=11 October 2010 |archive-url=https://web.archive.org/web/20210224154209/https://timesmachine.nytimes.com/timesmachine/1920/02/03/118255924.pdf |archive-date=24 February 2021}}</ref> that it is considered virtually certain Germany would have been defeated in a matter of months without it. Synthetic ammonia from the Haber process was used for the production of [[nitric acid]], a precursor to the nitrates used in explosives.

The original Haber–Bosch reaction chambers used [[osmium]] as the [[catalyst]], but this was available in extremely small quantities. Haber noted that [[uranium]] was almost as effective and easier to obtain than osmium. In 1909, BASF researcher [[Alwin Mittasch]] discovered a much less expensive iron-based catalyst that is still used. A major contributor to the discovery of this catalysis was [[Gerhard Ertl]].<ref>{{Cite journal |last1=Bozso |first1=F. |last2=Ertl |first2=G. |last3=Grunze |first3=M. |last4=Weiss |first4=M. |year=1977 |title=Interaction of nitrogen with iron surfaces: I. Fe(100) and Fe(111) |journal=[[Journal of Catalysis]] |volume=49 |issue=1 |pages=18–41 |doi=10.1016/0021-9517(77)90237-8}}</ref><ref>{{Cite journal |last1=Imbihl |first1=R. |last2=Behm |first2=R. J. |last3=Ertl |first3=G. |last4=Moritz |first4=W. |year=1982 |title=The structure of atomic nitrogen adsorbed on Fe(100) |url=https://epub.ub.uni-muenchen.de/5778/1/Moritz_Wolfgang_5778.pdf |journal=[[Surface Science]] |volume=123 |issue=1 |pages=129–140 |bibcode=1982SurSc.123..129I |doi=10.1016/0039-6028(82)90135-2}}</ref><ref name="Ertl1982adsorption">{{Cite journal |last1=Ertl |first1=G. |last2=Lee |first2=S. B. |last3=Weiss |first3=M. |year=1982 |title=Kinetics of nitrogen adsorption on Fe(111) |journal=[[Surface Science]] |volume=114 |issue=2–3 |pages=515–526 |bibcode=1982SurSc.114..515E |doi=10.1016/0039-6028(82)90702-6}}</ref><ref>{{Cite journal |last=Ertl |first=G. |year=1983 |title=Primary steps in catalytic synthesis of ammonia |journal=[[Journal of Vacuum Science and Technology A]] |volume=1 |issue=2 |pages=1247–1253 |bibcode=1983JVSTA...1.1247E |doi=10.1116/1.572299}}</ref> The most popular catalysts are based on iron promoted with [[Potassium oxide|K<sub>2</sub>O]], [[Calcium oxide|CaO]], [[Silicon dioxide|SiO<sub>2</sub>]], and [[Aluminium oxide|Al<sub>2</sub>O<sub>3</sub>]].

During the [[Interwar period|interwar years]], alternative processes were developed, most notably the Casale process, the Claude process, and the Mont-Cenis process developed by the [[Friedrich Uhde]] Ingenieurbüro.<ref>{{Cite web |title=100 years of Thyssenkrupp Uhde |url=https://www.thyssenkrupp-industrial-solutions.com/de/media/pressemitteilungen/100-jahre-thyssenkrupp-uhde |access-date=8 December 2021 |website=Industrial Solutions |language=de}}</ref> Luigi Casale and [[Georges Claude]] proposed to increase the pressure of the synthesis loop to {{convert|80|–|100|MPa|abbr=on|lk=on|bar psi}}, thereby increasing the single-pass ammonia conversion and making nearly complete liquefaction at ambient temperature feasible. Claude proposed to have three or four converters with liquefaction steps in series, thereby avoiding recycling. Most plants continue to use the original Haber process ({{convert|20|MPa|abbr=on|bar psi}} and {{convert|500|°C|°F|abbr=on}}), albeit with improved single-pass conversion and lower energy consumption due to process and catalyst optimization.

== Process ==
[[File:Ammoniak Reaktor BASF.jpg|thumb|upright|A historical (1921) high-pressure steel reactor for the production of ammonia via the Haber process is displayed at the [[Karlsruhe Institute of Technology]], Germany]]

Combined with the energy needed to [[Hydrogen production|produce hydrogen]] and purified atmospheric nitrogen, ammonia production is energy-intensive, accounting for 1% to 2% of [[global energy consumption]], 3% of global [[Greenhouse gas emissions|carbon emissions]],<ref>{{cite web |author-link=Lehigh University |date=2018-07-09 |title=Electrochemically-produced ammonia could revolutionize food production |url=https://phys.org/news/2018-07-electrochemically-produced-ammonia-revolutionize-food-production.html |access-date=2018-12-15 |language=en |quote=Ammonia manufacturing consumes 1 to 2% of total global energy and is responsible for approximately 3% of global carbon dioxide emissions.}}</ref> and 3% to 5% of [[natural gas]] consumption.<ref>{{cite journal |last1=Song |first1=Yang |last2=Hensley |first2=Dale |last3=Bonnesen |first3=Peter |last4=Liang |first4=Liango |last5=Huang |first5=Jingsong |last6=Baddorf |first6=Arthur |last7=Tschaplinski |first7=Timothy |last8=Engle |first8=Nancy |last9=Wu |first9=Zili |last10=Cullen |first10=David |last11=Meyer |first11=Harry III |last12=Sumpter |first12=Bobby |last13=Rondinone |first13=Adam |date=2018-05-02 |title=A physical catalyst for the electrolysis of nitrogen to ammonia |url=https://www.ornl.gov/content/physical-catalyst-electrolysis-nitrogen-ammonia |journal=Science Advances |language=en |publisher=Oak Ridge National Laboratory |volume=4 |issue=4 |pages=e1700336 |bibcode=2018SciA....4..336S |doi=10.1126/sciadv.1700336 |pmc=5922794 |pmid=29719860 |access-date=2018-12-15 |quote=Ammonia synthesis consumes 3 to 5% of the world's natural gas, making it a significant contributor to greenhouse gas emissions.}}</ref> Hydrogen required for ammonia synthesis is most often produced through [[gasification]] of carbon-containing material, mostly natural gas, but other potential carbon sources include coal, petroleum, peat, biomass, or waste. As of 2012, the global production of ammonia produced from natural gas using the steam reforming process was 72%,<ref>{{Cite news|url=http://ietd.iipnetwork.org/content/ammonia|title=Ammonia|date=2013-04-30|work=Industrial Efficiency Technology & Measures|access-date=2018-04-06|language=en|archive-date=2 October 2019|archive-url=https://web.archive.org/web/20191002001652/http://ietd.iipnetwork.org/content/ammonia|url-status=dead}}</ref> however in China as of 2022 natural gas and coal were responsible for 20% and 75% respectively.<ref>{{Cite journal |last1=Zhao |first1=Fu |last2=Fan |first2=Ying |last3=Zhang |first3=Shaohui |last4=Eichhammer |first4=Wolfgang |last5=Haendel |first5=Michael |last6=Yu |first6=Songmin |date=2022-04-01 |title=Exploring pathways to deep de-carbonization and the associated environmental impact in China's ammonia industry |journal=Environmental Research Letters |volume=17 |issue=4 |pages=045029 |doi=10.1088/1748-9326/ac614a |bibcode=2022ERL....17d5029Z |issn=1748-9326|doi-access=free }}</ref> Hydrogen can also be produced from water and electricity using [[Electrolysis of water|electrolysis]]: at one time, most of Europe's ammonia was produced from the Hydro plant at [[Vemork]]. Other possibilities include [[biological hydrogen production]] or [[photolysis]], but at present, [[steam reforming]] of natural gas is the most economical means of mass-producing hydrogen.

The choice of catalyst is important for synthesizing ammonia. In 2012, [[Hideo Hosono]]'s group found that [[Ruthenium|Ru]]-loaded calcium-aluminium oxide C12A7:{{chem2|e–}} [[electride]] works well as a catalyst and pursued more efficient formation.<ref>{{Cite journal |last1=Kuganathan |first1=Navaratnarajah |last2=Hosono |first2=Hideo |last3=Shluger |first3=Alexander L. |last4=Sushko |first4=Peter V. |date=January 2014 |title=Enhanced N2 Dissociation on Ru-Loaded Inorganic Electride |url=https://pubs.acs.org/doi/10.1021/ja410925g |journal=Journal of the American Chemical Society |language=en |volume=136 |issue=6 |pages=2216–2219 |doi=10.1021/ja410925g |pmid=24483141|bibcode=2014JAChS.136.2216K }}</ref><ref>{{Cite journal |last1=Hara |first1=Michikazu |last2=Kitano |first2=Masaaki |last3=Hosono |first3=Hideo |last4=Sushko |first4=Peter V. |date=2017 |title=Ru-Loaded C12A7:e– Electride as a Catalyst for Ammonia Synthesi |url=https://pubs.acs.org/doi/10.1021/acscatal.6b03357 |journal=ACS Catalysis |language=en |volume=7 |issue=4 |pages=2313–2324 |doi=10.1021/acscatal.6b03357}}</ref> This method is implemented in a small plant for ammonia synthesis in Japan.<ref>{{cite web |author= |date=27 April 2017 |title=Ajinomoto Co., Inc., UMI, and Tokyo Institute of Technology Professors Establish New Company to Implement the World's First On Site Production of Ammonia |url=https://www.ajinomoto.co.jp/company/en/presscenter/press/detail/g2017_04_27_02.html |access-date=9 November 2021 |website=[[Ajinomoto]]}}</ref><ref>{{cite web |author=Crolius |first=Stephen H. |date=17 December 2020 |title=Tsubame BHB Launches Joint Evaluation with Mitsubishi Chemical |url=https://www.ammoniaenergy.org/articles/tsubame-bhb-launches-joint-evaluation-with-mitsubishi-chemical/ |access-date=9 November 2021 |website=Ammonia Energy Association}}</ref> In 2019, Hosono's group found another catalyst, a novel [[perovskite]] oxynitride-hydride {{chem2|BaCeO_{3-''x''}N_{''y''}H_{''z''}|}}, that works at lower temperature and without costly ruthenium.<ref>{{Cite journal |last1=Kitano |first1=Masaaki |last2=Kujirai |first2=Jun |last3=Ogasawara |first3=Kiya |last4=Matsuishi |first4=Satoru |last5=Tada |first5=Tomofumi |last6=Abe |first6=Hitoshi |last7=Niwa |first7=Yasuhiro |last8=Hosono |first8=Hideo |date=2019 |title=Low-Temperature Synthesis of Perovskite Oxynitride-Hydrides as Ammonia Synthesis Catalysts |url=https://pubs.acs.org/doi/10.1021/jacs.9b10726 |journal=Journal of the American Chemical Society |language=en |volume=141 |issue=51 |pages=20344–20353 |doi=10.1021/jacs.9b10726 |pmid=31755269 |bibcode=2019JAChS.14120344K |s2cid=208227325}}</ref>

=== Hydrogen production ===
The major source of [[hydrogen]] is [[methane]]. Steam reforming of natural gas extracts hydrogen from methane in a high-temperature and pressure tube inside a reformer with a nickel catalyst. Other [[fossil fuel]] sources include coal, [[heavy fuel oil]] and [[naphtha]].

[[Green hydrogen]] is produced without [[fossil fuels]] or carbon dioxide emissions from [[biomass]], [[electrolysis of water|water electrolysis]] and [[thermochemical]] (solar or another heat source) water splitting.<ref>{{Cite journal |last1=Wang |first1=Ying |last2=Meyer |first2=Thomas J. |date=14 March 2019 |title=A Route to Renewable Energy Triggered by the Haber–Bosch Process |journal=Chem |volume=5 |issue=3 |pages=496–497 |doi=10.1016/j.chempr.2019.02.021 |s2cid=134713643 |doi-access=free|bibcode=2019Chem....5..496W }}</ref><ref>{{Cite journal |last1=Schneider |first1=Stefan |last2=Bajohr |first2=Siegfried |last3=Graf |first3=Frank |last4=Kolb |first4=Thomas |date=13 January 2020 |title=State of the Art of Hydrogen Production via Pyrolysis of Natural Gas |url=https://onlinelibrary.wiley.com/doi/abs/10.1002/cben.202000014 |journal=ChemBioEng Reviews |volume=7 |issue=5 |pages=150–158 |doi=10.1002/cben.202000014 |s2cid=221708661 |via=Wiley Online Library}}</ref><ref>{{Cite web|url=https://www.researchgate.net/publication/304537323|title=Progress in the Electrochemical Synthesis of Ammonia &#124; Request PDF}}</ref>

Starting with a [[natural gas]] ({{chem|link=methane|CH|4}}) feedstock, the steps are as follows;
* Remove [[sulfur]] compounds from the feedstock, because sulfur deactivates the [[catalyst]]s used in subsequent steps. Sulfur removal requires catalytic [[hydrogenation]] to convert sulfur compounds in the feedstocks to gaseous [[hydrogen sulfide]] ([[hydrodesulfurization]], hydrotreating):
::<chem>H2 + RSH -> RH + H2S</chem>
* Hydrogen sulfide is adsorbed and removed by passing it through beds of [[zinc oxide]] where it is converted to solid [[zinc sulfide]]:

[[File:SMR+WGS-1.png|thumb|upright=1.6|Illustrating inputs and outputs of [[steam reforming]] of natural gas, a process to produce hydrogen]]
::<chem>H2S + ZnO -> ZnS + H2O</chem>
* Catalytic [[steam reforming]] of the sulfur-free feedstock forms hydrogen plus [[carbon monoxide]]:
::<chem>CH4 + H2O -> CO + 3 H2</chem>
* Catalytic [[Water gas shift reaction|shift conversion]] converts the carbon monoxide to [[carbon dioxide]] and more hydrogen:
::<chem>CO + H2O -> CO2 + H2</chem>
* Carbon dioxide is removed either by absorption in aqueous [[ethanolamine]] solutions or by adsorption in [[Pressure swing adsorption|pressure swing adsorbers]] (PSA) using proprietary solid adsorption media.
* The final step in producing hydrogen is to use catalytic [[methanation]] to remove residual carbon monoxide or carbon dioxide:
::<chem> CO + 3 H2 -> CH4 + H2O</chem>
::<chem> CO2 + 4 H2 -> CH4 + 2 H2O</chem>

=== Ammonia production ===
The hydrogen is catalytically reacted with nitrogen (derived from process air{{clarify|date=September 2024}}) to form anhydrous [[liquid ammonia]]. It is difficult and expensive, as lower temperatures result in slower [[reaction kinetics]] (hence a slower [[reaction rate]]){{sfn|Clark|2013|loc=However, 400–450&nbsp;°C isn't a low temperature! Rate considerations: The lower the temperature you use, the slower the reaction becomes. A manufacturer is trying to produce as much ammonia as possible per day. It makes no sense to try to achieve an equilibrium mixture which contains a very high proportion of ammonia if it takes several years for the reaction to reach that equilibrium".}} and high pressure requires high-strength pressure vessels{{sfn|Clark|2013|loc="Rate considerations: Increasing the pressure brings the molecules closer together. In this particular instance, it will increase their chances of hitting and sticking to the surface of the catalyst where they can react. The higher the pressure the better in terms of the rate of a gas reaction. Economic considerations: Very high pressures are expensive to produce on two counts. Extremely strong pipes and containment vessels are needed to withstand the very high pressure. That increases capital costs when the plant is built"}} that resist [[hydrogen embrittlement]]. [[Diatomic]] nitrogen is bound together by a [[triple bond]], which makes it relatively inert.<ref name=XiaopingZhang_2024>{{cite journal |journal=[[Nature Communications]] |volume = 15 |issue = 1 |article-number = 1535 |doi=10.1038/s41467-024-45832-9 |title=Efficient catalyst-free N<sub>2</sub> fixation by water radical cations under ambient conditions |year=2024 |first1=Xiaoping|last1=Zhang|first2=Rui|last2=Su|first3=Jingling|last3=Li|first4=Liping|last4=Huang|first5=Wenwen|last5=Yang|first6=Konstantin|last6=Chingin|first7=Roman|last7=Balabin|first8=Jingjing|last8=Wang|first9=Xinglei|last9=Zhang|first10=Weifeng|last10=Zhu|first11=Keke|last11=Huang|first12=Shouhua|last12=Feng|first13=Huanwen|last13=Chen|page = 1535 |pmid=38378822|pmc=10879522|bibcode = 2024NatCo..15.1535Z }}</ref><ref>{{cite web |date=2019-06-05 |title=Chemistry of Nitrogen |url=https://chem.libretexts.org/Bookshelves/Inorganic_Chemistry/Supplemental_Modules_(Inorganic_Chemistry)/Descriptive_Chemistry/Elements_Organized_by_Block/2_p-Block_Elements/Group_15%3A_The_Nitrogen_Family/Z%3D007_Chemistry_of_Nitrogen_(Z%3D7) |access-date=2019-07-07 |website=Chem.LibreTexts.org |department=Compounds}}</ref> Yield and efficiency are low, meaning that the ammonia must be extracted and the gases reprocessed for the reaction to proceed at an acceptable pace.{{sfn|Clark|2013|loc="At each pass of the gases through the reactor, only about 15% of the nitrogen and hydrogen converts to ammonia. (This figure also varies from plant to plant.) By continual recycling of the unreacted nitrogen and hydrogen, the overall conversion is about 98%"}}

This step is known as the ammonia synthesis loop:

:<chem>3 H2 + N2 -> 2 NH3</chem>

The gases (nitrogen and hydrogen) are passed over four beds of [[catalyst]], with cooling between each pass to maintain a reasonable [[equilibrium constant]]. On each pass, only about 15% conversion occurs, but unreacted gases are recycled, and eventually conversion of 97% is achieved.<ref name="Appl" />

Due to the nature of the (typically multi-promoted [[magnetite]]) catalyst used in the ammonia synthesis reaction, only low levels of oxygen-containing (especially CO, CO<sub>2</sub> and H<sub>2</sub>O) compounds can be tolerated in the hydrogen/nitrogen mixture. Relatively pure nitrogen can be obtained by [[air separation]], but additional [[oxygen]] removal may be required.

Because of relatively low single pass conversion rates (typically less than 20%), a large recycle stream is required. This can lead to the accumulation of inerts in the gas.

Nitrogen gas (N<sub>2</sub>) is unreactive because the [[atoms]] are held together by [[Chemical bond|triple bonds]]. The Haber process relies on catalysts that accelerate the [[scission (chemistry)|scission]] of these bonds.

Two opposing considerations are relevant: the equilibrium position and the [[reaction rate]]. At room temperature, the equilibrium is in favor of ammonia, but the reaction does not proceed at a detectable rate due to its high activation energy. Because the reaction is [[exothermic reaction|exothermic]], the equilibrium constant decreases with increasing temperature following [[Le Châtelier's principle]]. It becomes unity at around {{convert|150|–|200|°C|F|abbr=on}}.<ref name="Appl" />

{| class="wikitable" style="clear:right; float:right; margin-left: 1em;" border="3"
|+ ''K''(''T'') for {{chem|N|2}} + 3 {{chem|H|2}} ⇌ 2 {{chem|N|H|3}}<ref>{{Cite book |last1=Brown |first1=Theodore L. |title=Chemistry: The Central Science |last2=LeMay |first2=H. Eugene Jr. |last3=Bursten |first3=Bruce E. |date=2006 |publisher=Pearson |isbn=978-0-13-109686-8 |edition=10th |location=Upper Saddle River, NJ |chapter=Table 15.2 |chapter-url=https://archive.org/details/chemistry00theo_0 |chapter-url-access=registration}}</ref>
! Temperature<br>(°C)
! ''K''<sub>p</sub><br>{{clarify|date=September 2024}}
|-
| align="center" | 300
| 4.34 × 10<sup>−3</sup>
|-
| align="center" | 400
| 1.64 × 10<sup>−4</sup>
|-
| align="center" | 450
| 4.51 × 10<sup>−5</sup>
|-
| align="center" | 500
| 1.45 × 10<sup>−5</sup>
|-
| align="center" | 550
| 5.38 × 10<sup>−6</sup>
|-
| align="center" | 600
| 2.25 × 10<sup>−6</sup>
|}
Above this temperature, the equilibrium quickly becomes unfavorable at atmospheric pressure, according to the [[Van 't Hoff equation]]. Lowering the temperature is unhelpful because the catalyst requires a temperature of at least 400&nbsp;°C to be efficient.<ref name="Appl" />

Increased [[pressure]] favors the forward reaction because 4&nbsp;moles of reactant produce 2&nbsp;moles of product, and the pressure used ({{convert|15|–|25|MPa|abbr=on|bar psi}}) alters the equilibrium concentrations to give a substantial ammonia yield. The reason for this is evident in the equilibrium relationship:

<math chem="" display="block">K = \frac{y_\ce{NH3}^2}{y_\ce{H2}^3 y_\ce{N2}} \frac{\hat\phi_\ce{NH3}^2}{\hat\phi_\ce{H2}^3 \hat\phi_\ce{N2}} \left(\frac{P^\circ}{P}\right)^2,</math>

where <math>\hat\phi_i</math> is the [[fugacity coefficient]] of species <math>i</math>, <math>y_i</math> is the [[mole fraction]] of the same species, <math>P</math> is the reactor pressure, and <math>P^\circ</math> is standard pressure, typically {{convert|1|bar|MPa}}.

Economically, reactor pressurization is expensive: pipes, valves, and reaction vessels need to be strong enough, and safety considerations affect operating at 20&nbsp;MPa. Compressors take considerable energy, as work must be done on the (compressible) gas. Thus, the compromise used gives a single-pass yield of around 15%.<ref name="Appl" />

While removing the ammonia from the system increases the reaction yield, this step is not used in practice, since the temperature is too high; instead it is removed from the gases leaving the reaction vessel. The hot gases are cooled under high pressure, allowing the ammonia to condense and be removed as a liquid. Unreacted hydrogen and nitrogen gases are returned to the reaction vessel for another round.<ref name="Appl" /> While most ammonia is removed (typically down to 2–5&nbsp;mol.%), some ammonia remains in the recycle stream. In academic literature, a more complete separation of ammonia has been proposed by absorption in [[metal halides]], [[metal-organic framework]]s or [[zeolites]].<ref>{{Cite journal |last1=De Alwis Jayasinghe |first1=Dukula |last2=Chen |first2=Yinlin |last3=Li |first3=Jiangnan |last4=Rogacka |first4=Justyna M. |last5=Kippax-Jones |first5=Meredydd |last6=Lu |first6=Wanpeng |last7=Sapchenko |first7=Sergei |last8=Yang |first8=Jinyue |last9=Chansai |first9=Sarayute |last10=Zhou |first10=Tianze |last11=Guo |first11=Lixia |last12=Ma |first12=Yujie |last13=Dong |first13=Longzhang |last14=Polyukhov |first14=Daniil |last15=Shan |first15=Lutong |last16=Han |first16=Yu |last17=Crawshaw |first17=Danielle |last18=Zeng |first18=Xiangdi |last19=Zhu |first19=Zhaodong |last20=Hughes |first20=Lewis |last21=Frogley |first21=Mark D. |last22=Manuel |first22=Pascal |last23=Rudić |first23=Svemir |last24=Cheng |first24=Yongqiang |last25=Hardacre |first25=Christopher |last26=Schröder |first26=Martin |last27=Yang |first27=Sihai|date=8 November 2024 |title=A Flexible Phosphonate Metal–Organic Framework for Enhanced Cooperative Ammonia Capture |journal=Journal of the American Chemical Society |volume=146 |issue=46 |pages=32040–32048  |doi=10.1021/jacs.4c12430|pmid=39513623 |pmc=11583364 }}</ref> Such a process is called an ''absorbent-enhanced Haber process'' or ''adsorbent-enhanced Haber–Bosch process''.<ref>{{Cite journal |last1=Abild-pedersen |first1=Frank |last2=Bligaard |first2=Thomas |date=1 January 2014 |title=Exploring the limits: A low-pressure, low-temperature Haber–Bosch process |url=https://www.academia.edu/25092433 |journal=Chemical Physics Letters |volume=598 |page=108 |bibcode=2014CPL...598..108V |doi=10.1016/j.cplett.2014.03.003 |via=academia.edu}}</ref>

=== Pressure/temperature ===
The steam reforming, shift conversion, [[carbon dioxide removal]], and [[methanation]] steps each operate at absolute pressures of about 25 to 35 bar, while the ammonia synthesis loop operates at temperatures of {{Convert|300-500|C|abbr=on}} and pressures ranging from 60 to 180 bar depending upon the method used. The resulting ammonia must then be separated from the residual hydrogen and nitrogen at temperatures of {{Convert|-20|C|abbr=on}}.<ref name=":0">{{Cite web |last=Koop |first=Fermin |date=2023-01-13 |title=Green ammonia (and fertilizer) may finally be in sight -- and it would be huge |url=https://www.zmescience.com/science/green-ammonia-and-fertilizer-may-finally-be-in-sight-and-it-would-be-huge/ |access-date=2023-03-21 |website=ZME Science |language=en-US}}</ref><ref name="Appl" />

== Catalysts ==
[[File:Ammoniak-Reaktor 1913 Oppau (retuschiert).jpg|thumb|upright|First reactor at the Oppau plant in 1913]]
[[File:Heterogene Katalyse.svg|thumb|upright|Profiles of the active components of heterogeneous catalysts; the top right figure shows the profile of a shell catalyst.]]
The Haber–Bosch process relies on catalysts to accelerate N<sub>2</sub> hydrogenation. The catalysts are [[heterogeneous catalyst|heterogeneous]] solids that interact with gaseous reagents.<ref name="mittasch">{{Cite journal |last=Mittasch |first=Alwin |year=1926 |title=Bemerkungen zur Katalyse |journal=Berichte der Deutschen Chemischen Gesellschaft (A and B Series) |volume=59 |pages=13–36 |doi=10.1002/cber.19260590103}}</ref>

The catalyst typically consists of finely divided iron bound to an iron oxide [[catalyst support|carrier]] containing [[Promoter (catalysis)|promoters]] possibly including [[aluminium oxide]], [[potassium oxide]], [[calcium oxide]], potassium hydroxide,<ref>{{Cite web |title=3.1 Ammonia synthesis |url=http://resources.schoolscience.co.uk/ICI/14-16/catalysis/catsch3pg2.html |url-status=live |archive-url=https://web.archive.org/web/20200706200813/http://resources.schoolscience.co.uk/ICI/14-16/catalysis/catsch3pg2.html |archive-date=6 July 2020 |website=resources.schoolscience.co.uk}}</ref> molybdenum,<ref>{{Cite book |last=Rock |first=Peter A. |url={{google books |plainurl=y |id=TLJoF9kizrAC|page=317}} |title=Chemical Thermodynamics |date=19 June 2013 |isbn=978-1-891389-32-0 |page=317|publisher=University Science Books }}</ref> and [[magnesium oxide]].

=== Iron-based catalysts ===
The iron catalyst is obtained from finely ground iron powder, which is usually obtained by reduction of high-purity [[magnetite]] (Fe<sub>3</sub>O<sub>4</sub>). The pulverized iron is oxidized to give magnetite or [[wüstite]] (FeO, ferrous oxide) particles of a specific size. The magnetite (or wüstite) particles are then partially reduced, removing some of the [[oxygen]]. The resulting catalyst particles consist of a core of magnetite, encased in a shell of [[wüstite]], which in turn is surrounded by an outer shell of metallic iron. The catalyst maintains most of its bulk volume during the reduction, resulting in a highly porous high-surface-area material, which enhances its catalytic effectiveness. Minor components include [[Calcium oxide|calcium]] and [[aluminium oxide]]s, which support the iron catalyst and help it maintain its surface area. These oxides of Ca, Al, K, and Si are unreactive to reduction by hydrogen.<ref name="Appl" />

The production of the catalyst requires a particular melting process in which used [[raw material]]s must be free of [[Catalyst poisoning|catalyst poisons]] and the promoter aggregates must be evenly distributed in the magnetite melt. Rapid cooling of the magnetite, which has an initial temperature of about 3500&nbsp;°C, produces the desired precursor. Unfortunately, the rapid cooling ultimately forms a catalyst of reduced abrasion resistance. Despite this disadvantage, the method of rapid cooling is often employed.<ref name="Appl" />

The reduction of the precursor magnetite to α-iron is carried out directly in the production plant with [[synthesis gas]]. The reduction of the magnetite proceeds via the formation of [[wüstite]] (FeO) so that particles with a core of magnetite become surrounded by a shell of wüstite. The further reduction of magnetite and wüstite leads to the formation of α-iron, which forms together with the promoters the outer shell.<ref name="max">{{Ullmann|author=Max Appl|title=Ammonia|year=2006|doi=10.1002/14356007.a02_143.pub2}}</ref> The involved processes are complex and depend on the reduction temperature: At lower temperatures, wüstite [[disproportionates]] into an iron phase and a magnetite phase; at higher temperatures, the reduction of the wüstite and magnetite to iron dominates.<ref name="jozwiak">{{Cite journal |last1=Jozwiak |first1=W. K. |last2=Kaczmarek |first2=E. |year=2007 |title=Reduction behavior of iron oxides in hydrogen and carbon monoxide atmospheres |journal=Applied Catalysis A: General |volume=326 |pages=17–27 |doi=10.1016/j.apcata.2007.03.021}}</ref>

The α-iron forms primary [[crystallite]]s with a diameter of about 30 nanometers. These crystallites form a bimodal pore system with pore diameters of about 10 nanometers (produced by the reduction of the magnetite phase) and of 25 to 50 nanometers (produced by the reduction of the wüstite phase).<ref name="max" /> With the exception of [[cobalt oxide]], the promoters are not reduced.

During the reduction of the iron oxide with synthesis gas, water vapor is formed. This water vapor must be considered for high catalyst quality as contact with the finely divided iron would lead to premature aging of the catalyst through [[Recrystallization (metallurgy)|recrystallization]], especially in conjunction with high temperatures. The [[vapor pressure]] of the water in the gas mixture produced during catalyst formation is thus kept as low as possible, target values are below 3 gm<sup>−3</sup>. For this reason, the reduction is carried out at high gas exchange, low pressure, and low temperatures. The [[Exothermic reaction|exothermic]] nature of the ammonia formation ensures a gradual increase in temperature.<ref name="Appl" />

The reduction of fresh, fully oxidized catalyst or precursor to full production capacity takes four to ten days.<ref name="Appl" /> The wüstite phase is reduced faster and at lower temperatures than the [[magnetite]] phase (Fe<sub>3</sub>O<sub>4</sub>). After detailed kinetic, microscopic, and [[X-ray spectroscopy|X-ray spectroscopic]] investigations it was shown that wüstite reacts first to metallic iron. This leads to a gradient of iron(II) ions, whereby these diffuse from the magnetite through the wüstite to the particle surface and precipitate there as iron nuclei. A high-activity novel catalyst based on this phenomenon was discovered in the 1980s at the [[Zhejiang University of Technology]] and commercialized by 2003.<ref>{{Cite journal |last1=Liu |first1=Huazhang |last2=Han |first2=Wenfeng |last3=Huo |first3=Chao |last4=Cen |first4=Yaqing |date=2020-09-15 |title=Development and application of wüstite-based ammonia synthesis catalysts |url=https://www.sciencedirect.com/science/article/abs/pii/S0920586119305966 |journal=Catalysis Today |series=SI: Energy and the Environment |volume=355 |pages=110–127 |doi=10.1016/j.cattod.2019.10.031 |issn=0920-5861}}</ref>

Pre-reduced, stabilized catalysts occupy a significant [[market share]]. They are delivered showing the fully developed pore structure, but have been oxidized again on the surface after manufacture and are therefore no longer [[Pyrophoricity|pyrophoric]]. The reactivation of such pre-reduced catalysts requires only 30 to 40 hours instead of several days. In addition to the short start-up time, they have other advantages such as higher water resistance and lower weight.<ref name="Appl" />
{| class="wikitable centered"
!Typical catalyst composition<ref name="ertl1">{{Cite journal |last=Ertl |first=Gerhard |year=1983 |title=Zum Mechanismus der Ammoniak-Synthese |journal=Nachrichten aus Chemie, Technik und Laboratorium |language=de |volume=31 |issue=3 |pages=178–182 |doi=10.1002/nadc.19830310307}}</ref>
! Iron (%)
! Potassium (%)
! Aluminium (%)
! Calcium (%)
! Oxygen (%)
|-
|align="left" | Volume composition
| 40.5
| {{0}}0.35
| {{0}}2.0
| 1.7
| 53.2
|-
|align="left" | Surface composition before reduction
| {{0}}8.6
| 36.1
| 10.7
| 4.7
| 40.0
|-
|align="left" | Surface composition after reduction
| 11.0
| 27.0
| 17.0
| 4.0
| 41.0
|}

=== Catalysts other than iron ===
Many efforts have been made to improve the Haber–Bosch process. Many metals were tested as catalysts. The requirement for suitability is the [[dissociative adsorption]] of [[nitrogen]] (i. e. the nitrogen molecule must be split into nitrogen atoms upon adsorption). If the binding of the nitrogen is too strong, the catalyst is blocked and the catalytic ability is reduced (self-poisoning). The elements in the [[periodic table]] to the left of the [[iron group]] show such strong bonds. Further, the formation of surface nitrides makes, for example, chromium catalysts ineffective. Metals to the right of the iron group, in contrast, adsorb nitrogen too weakly for ammonia synthesis. Haber initially used catalysts based on [[osmium]] and [[uranium]]. Uranium reacts to its nitride during catalysis, while osmium oxide is rare.<ref name="Bowker">{{Cite book |last=Bowker |first=Michael |title=The Chemical Physics of Solid Surfaces |date=1993 |publisher=Elsevier |isbn=978-0-444-81468-5 |editor-last=King |editor-first=D. A. |volume=6: ''Coadsorption, promoters and poisons'' |pages=225–268 |chapter=Chapter 7 |editor-last2=Woodruff |editor-first2=D. P.}}</ref>

According to theoretical and practical studies, improvements over pure iron are limited. The activity of iron catalysts is increased by the inclusion of cobalt.<ref>{{Cite journal |last1=Tavasoli |first1=Ahmad |last2=Trépanier |first2=Mariane |last3=Malek Abbaslou |first3=Reza M. |last4=Dalai |first4=Ajay K. |last5=Abatzoglou |first5=Nicolas |date=1 December 2009 |title=Fischer–Tropsch synthesis on mono- and bimetallic Co and Fe catalysts supported on carbon nanotubes |url=https://www.sciencedirect.com/science/article/pii/S0378382009002069 |journal=Fuel Processing Technology |language=en |volume=90 |issue=12 |pages=1486–1494 |doi=10.1016/j.fuproc.2009.07.007 |bibcode=2009FuPrT..90.1486T |issn=0378-3820}}</ref>

==== Ruthenium ====
[[Ruthenium]] forms highly active catalysts. Allowing milder operating pressures and temperatures, Ru-based materials are referred to as second-generation catalysts. Such catalysts are prepared by the decomposition of [[triruthenium dodecacarbonyl]] on [[graphite]].<ref name="Appl" /> A drawback of activated-carbon-supported ruthenium-based catalysts is the methanation of the support in the presence of hydrogen. Their activity is strongly dependent on the catalyst carrier and the promoters. A wide range of substances can be used as carriers, including [[carbon]], [[magnesium oxide]], [[aluminium oxide]], [[zeolite]]s, [[spinel]]s, and [[boron nitride]].<ref name="YouZhixiong">{{Cite journal |last1=You |first1=Zhixiong |last2=Inazu |first2=Koji |last3=Aika |first3=Ken-ichi |last4=Baba |first4=Toshihide |date=October 2007 |title=Electronic and structural promotion of barium hexaaluminate as a ruthenium catalyst support for ammonia synthesis |journal=Journal of Catalysis |volume=251 |issue=2 |pages=321–331 |doi=10.1016/j.jcat.2007.08.006}}</ref>

Ruthenium-activated carbon-based catalysts have been used industrially in the KBR Advanced Ammonia Process (KAAP) since 1992.<ref name="rosowski">{{Cite journal |last1=Rosowski |first1=F. |last2=Hornung |first2=A. |last3=Hinrichsen |first3=O. |last4=Herein |first4=D. |last5=Muhler |first5=M. |date=April 1997 |title=Ruthenium catalysts for ammonia synthesis at high pressures: Preparation, characterization, and power-law kinetics |journal=Applied Catalysis A: General |volume=151 |issue=2 |pages=443–460 |doi=10.1016/S0926-860X(96)00304-3}}</ref> The carbon carrier is partially degraded to [[methane]]; however, this can be mitigated by a special treatment of the carbon at 1500&nbsp;°C, thus prolonging the catalyst lifetime. In addition, the finely dispersed carbon poses a risk of explosion. For these reasons and due to its low [[acid]]ity, magnesium oxide has proven to be a good choice of carrier. Carriers with acidic properties extract electrons from ruthenium, make it less reactive, and have the undesirable effect of binding ammonia to the surface.<ref name="YouZhixiong" />

=== Catalyst poisons ===
[[Catalyst poisoning|Catalyst poisons]] lower catalyst activity. They are usually impurities in the [[synthesis gas]]. Permanent poisons cause irreversible loss of catalytic activity, while temporary poisons lower the activity while present. [[Sulfur]] compounds, [[phosphorus]] compounds, [[arsenic]] compounds, and [[chlorine]] compounds are permanent poisons. Oxygenic compounds like water, [[carbon monoxide]], [[carbon dioxide]], and [[oxygen]] are temporary poisons.<ref name="Appl" /><ref>{{Citation |last=Højlund Nielsen |first=P. E. |title=Poisoning of Ammonia Synthesis Catalysts |url=https://doi.org/10.1007/978-3-642-79197-0_5 |work=Ammonia: Catalysis and Manufacture |pages=191–198 |year=1995 |editor-last=Nielsen |editor-first=Anders |access-date=30 July 2022 |place=Berlin, Heidelberg |publisher=Springer |language=en |doi=10.1007/978-3-642-79197-0_5 |isbn=978-3-642-79197-0}}</ref>

Although chemically inert components of the synthesis gas mixture such as [[noble gas]]es or [[methane]] are not strictly poisons, they accumulate through the recycling of the process gases and thus lower the partial pressure of the reactants, which in turn slows conversion.<ref name="roempp">{{Cite book |last=Falbe |first=Jürgen |title=Römpp-Lexikon Chemie (H–L) |date=1997 |publisher=Georg Thieme Verlag |isbn=978-3-13-107830-8 |pages=1644–1646}}</ref>

== Industrial production ==

=== Synthesis parameters ===
{| class="wikitable floatright"
|+Change of the equilibrium constant K<sub>eq</sub> as a function of temperature<ref name="brown">{{Cite book |last1=Brown |first1=Theodore L. |title=Chemistry the Central Science |last2=LeMay |first2=H. Eugene |last3=Bursten |first3=Bruce Edward |date=2003 |publisher=Prentice Hall |isbn=978-0-13-038168-2 |editor-last=Brunauer |editor-first=Linda Sue |edition=9th |location=Upper Saddle River, New Jersey, Pakistan Punjab|language=en}}</ref>
|-
! temperature (°C)
! K<sub>eq</sub>
|-
|align="center" | 300
| 4.34 × 10<sup>−3</sup>
|-
|align="center" | 400
| 1.64 × 10<sup>−4</sup>
|-
|align="center" | 450
| 4.51 × 10<sup>−5</sup>
|-
|align="center" | 500
| 1.45 × 10<sup>−5</sup>
|-
|align="center" | 550
| 5.38 × 10<sup>−6</sup>
|-
|align="center" | 600
| 2.25 × 10<sup>−6</sup>
|}

The reaction is:

:<math chem>\ce{N2 + 3H2 <=> 2NH3} \qquad {\Delta H^\circ_{\mathrm{298~K}} = -92.28 \; \ce{kJ/mol}}) </math><ref name="Holleman">{{Holleman&Wiberg|edition=102|pages=662–665}}</ref>

The reaction is an exothermic equilibrium reaction in which the gas volume is reduced. The equilibrium constant K<sub>eq</sub> of the reaction (see table) and obtained from:

: <math chem>K_{eq} = \frac{p^2 \ce{(NH3)}}{p \ce{(N2)}\cdot p^3 \ce{(H2)}}</math>

Since the reaction is [[Exothermic reaction|exothermic]], the equilibrium of the reaction shifts at lower temperatures to the ammonia side. Furthermore, four volumetric units of the raw materials produce two volumetric units of ammonia. According to [[Le Chatelier's principle]], higher pressure favours ammonia. High pressure is necessary to ensure sufficient surface coverage of the catalyst with nitrogen.<ref name="cornils">{{Cite book |last1=Cornils |first1=Boy |title=Catalysis from A to Z: A Concise Encyclopedia |last2=Herrmann |first2=Wolfgang A. |last3=Muhler |first3=M. |last4=Wong |first4=C. |date=2007 |publisher=Verlag Wiley-VCH |isbn=978-3-527-31438-6 |page=31}}</ref> For this reason, a ratio of nitrogen to hydrogen of 1 to 3, a [[pressure]] of 250 to 350 bar, a temperature of 450 to 550&nbsp;°C and α iron are optimal.

The catalyst [[Ferrite (iron)|ferrite]] (α-Fe) is produced in the reactor by the reduction of magnetite with hydrogen. The catalyst has its highest efficiency at temperatures of about 400 to 500&nbsp;°C. Even though the catalyst greatly lowers the [[activation energy]] for the cleavage of the [[triple bond]] of the nitrogen molecule, high temperatures are still required for an appropriate reaction rate. At the industrially used reaction temperature of 450 to 550&nbsp;°C an optimum between the decomposition of ammonia into the starting materials and the effectiveness of the catalyst is achieved.<ref name="Oberstufe">{{Cite book |title=Fokus Chemie Oberstufe Einführungsphase |date=2010 |publisher=Cornelsen-Verlag |isbn=978-3-06-013953-8 |location=Berlin |page=79 |language=de}}</ref> The formed ammonia is continuously removed from the system. The volume fraction of ammonia in the gas mixture is about 20%.

The inert components, especially the noble gases such as [[argon]], should not exceed a certain content in order not to reduce the [[partial pressure]] of the reactants too much. To remove the inert gas components, part of the gas is removed and the argon is separated in a [[gas separation plant]]. The extraction of pure argon from the circulating gas is carried out using the [[Linde process]].<ref name="ullmann">P. Häussinger u. a.: ''Noble Gases.'' In: ''Ullmann's Encyclopedia of Industrial Chemistry.'' Wiley-VCH, Weinheim 2006. {{doi|10.1002/14356007.a17_485}}</ref>

=== Large-scale implementation ===
Modern ammonia plants produce more than 3000 tons per day in one production line. The following diagram shows the set-up of a modern (designed in the early 1960s by [[KBR, Inc.|Kellogg]]<ref>https://acshist.scs.illinois.edu/bulletin_open_access/v47-1/v47-1%20p50-61.pdf</ref>) "single-train" Haber–Bosch plant:

[[File:Haber-Bosch-En.svg|upright=3.6|thumb|center|{{Farbindex|ecbae7|primary reformer}} {{Farbindex|4d94e1|air feed}} {{Farbindex|f2c500|secondary reformer}} {{Farbindex|cadaeb|CO conversion}} {{Farbindex|cadaeb|washing tower}} {{Farbindex|f2c500|ammonia reactor}} {{Farbindex|4d94e1|heat exchanger}} {{Farbindex|fffc51|ammonia condenser}}]]

Depending on its origin, the synthesis gas must first be freed from impurities such as [[hydrogen sulfide]] or organic sulfur compounds, which act as a [[catalyst poisoning|catalyst poison]]. High concentrations of hydrogen sulfide, which occur in synthesis gas from [[carbonization]] coke, are removed in a wet cleaning stage such as the [[sulfosolvan process]], while low concentrations are removed by adsorption on [[activated carbon]].<ref name="leibnitz">{{Cite journal |last1=Leibnitz |first1=E. |last2=Koch |first2=H. |last3=Götze |first3=A. |year=1961 |title=Über die drucklose Aufbereitung von Braunkohlenkokereigas auf Starkgas nach dem Girbotol-Verfahren |journal=Journal für Praktische Chemie |language=de |volume=13 |issue=3–4 |pages=215–236 |doi=10.1002/prac.19610130315}}</ref> Organosulfur compounds are separated by [[pressure swing adsorption]] together with carbon dioxide after CO conversion.

To produce [[hydrogen]] by steam reforming, methane reacts with water vapor using a nickel oxide-alumina catalyst in the primary reformer to form [[carbon monoxide]] and hydrogen. The energy required for this, the [[enthalpy]] ΔH, is 206 kJ/mol.<ref name="steinborn1">{{Cite book |last=Steinborn |first=Dirk |title=Grundlagen der metallorganischen Komplexkatalyse |date=2007 |publisher=Teubner |isbn=978-3-8351-0088-6 |location=Wiesbaden |pages=319–321 |language=de}}</ref>

:<math chem>\ce{ {CH4_{(g)} } + H2O_{(g)} -> {CO_{(g)} } + 3H2_{(g)} } \qquad {\Delta H^\circ = +206\ \ce{kJ/mol} }</math>

The methane gas reacts in the primary reformer only partially. To increase the hydrogen yield and keep the content of inert components (i. e. methane) as low as possible, the remaining methane gas is converted in a second step with oxygen to hydrogen and carbon monoxide in the secondary reformer. The secondary reformer is supplied with air as the oxygen source. Also, the required nitrogen for the subsequent ammonia synthesis is added to the gas mixture.

:<math chem>\ce{ {2CH4_{(g)} } + O2_{(g)} -> {2CO_{(g)} } + 4H2_{(g)} } \qquad {\Delta H^\circ = -71\ \ce{kJ/mol} }</math>

In the third step, the carbon monoxide is oxidized to [[carbon dioxide]], which is called CO conversion or [[water-gas shift reaction]].

:<math chem>\ce{ {CO_{(g)} } + H2O(g) -> {CO2_{(g)} } + H2_{(g)}} \qquad {\Delta H^\circ = -41\ \ce{kJ/mol} }</math>

Carbon monoxide and carbon dioxide would form [[carbamate]]s with ammonia, which would clog (as solids) pipelines and apparatus within a short time. In the following process step, the carbon dioxide must therefore be removed from the gas mixture. In contrast to carbon monoxide, carbon dioxide can easily be removed from the gas mixture by [[Scrubber|gas scrubbing]] with [[triethanolamine]]. The gas mixture then still contains methane and noble gases such as argon, which, however, behave inertly.<ref name="roempp" />

The gas mixture is then compressed to operating pressure by [[Turbo-compressor|turbo compressors]]. The resulting compression heat is dissipated by [[heat exchanger]]s; it is used to preheat raw gases.

The actual production of ammonia takes place in the ammonia reactor. The first reactors were bursting under high pressure because the atomic hydrogen in the carbonaceous steel [[High temperature hydrogen attack|partially recombined into methane]] and produced cracks in the steel. Bosch, therefore, developed tube reactors consisting of a pressure-bearing steel tube in which a low-carbon iron lining tube was inserted and filled with the catalyst. Hydrogen that diffused through the inner steel pipe escaped to the outside via thin holes in the outer steel jacket, the so-called Bosch holes.<ref name="Holleman" /> A disadvantage of the tubular reactors was the relatively high-pressure loss, which had to be applied again by compression. The development of hydrogen-resistant chromium-molybdenum steels made it possible to construct single-walled pipes.<ref name="forst" />

[[File:Ammoniakreaktor MS.svg|thumb|upright=1.2|Modern ammonia reactor with heat exchanger modules: The cold gas mixture is preheated to reaction temperature in heat exchangers by the reaction heat and cools in turn the produced ammonia.]]

Modern ammonia reactors are designed as multi-storey reactors with a low-pressure drop, in which the catalysts are distributed as fills over about ten storeys one above the other. The gas mixture flows through them one after the other from top to bottom. Cold gas is injected from the side for cooling. A disadvantage of this reactor type is the incomplete conversion of the cold gas mixture in the last catalyst bed.<ref name="forst">{{Cite book |last1=Forst |first1=Detlef |title=Chemie für Ingenieure |last2=Kolb |first2=Maximillian |last3=Roßwag |first3=Helmut |date=1993 |publisher=Springer Verlag |isbn=978-3-662-00655-9 |pages=234–238 |language=de}}</ref>

Alternatively, the reaction mixture between the catalyst layers is cooled using heat exchangers, whereby the hydrogen-nitrogen mixture is preheated to the reaction temperature. Reactors of this type have three catalyst beds. In addition to good temperature control, this reactor type has the advantage of better conversion of the raw material gases compared to reactors with cold gas injection.

Uhde has developed and is using an ammonia converter with three radial flow catalyst beds and two internal heat exchangers instead of axial flow catalyst beds. This further reduces the pressure drop in the converter.<ref>{{Cite web |title=Ammoniakkonverter – Düngemittelanlagen |url=https://www.thyssenkrupp-industrial-solutions.com/de/produkte-und-services/duengemittelanlagen/ammonia-plants-by-uhde/ammonia-plants-500mtpd/ammoniakkonverter |access-date=8 December 2021 |website=Industrial Solutions |language=de}}</ref>

The reaction product is continuously removed for maximum yield. The gas mixture is cooled to 450&nbsp;°C in a heat exchanger using water, freshly supplied gases, and other process streams. The ammonia also condenses and is separated in a pressure separator. Unreacted nitrogen and hydrogen are then compressed back to the process by a [[Gas compressor|circulating gas compressor]], supplemented with fresh gas, and fed to the reactor.<ref name="forst" /> In a subsequent distillation, the product ammonia is purified.

== Mechanism ==
=== Elementary steps ===
The mechanism of ammonia synthesis contains the following seven [[elementary step]]s:

# transport of the reactants from the gas phase through the boundary layer to the surface of the catalyst.
# pore diffusion to the reaction center
# [[adsorption]] of reactants
# reaction
# [[desorption]] of product
# transport of the product through the pore system back to the surface
# transport of the product into the gas phase

Transport and diffusion (the first and last two steps) are fast compared to adsorption, reaction, and desorption because of the shell structure of the catalyst. It is known from various investigations that the [[rate-determining step]] of the ammonia synthesis is the [[Dissociation (chemistry)|dissociation]] of nitrogen.<ref name="Appl" /> In contrast, exchange reactions between [[hydrogen]] and [[deuterium]] on the Haber–Bosch catalysts still take place at temperatures of {{convert|-196|C}} at a measurable rate; the exchange between deuterium and hydrogen on the ammonia molecule also takes place at room temperature. Since the adsorption of both molecules is rapid, it cannot determine the speed of ammonia synthesis.<ref name="moore">{{Cite book |last1=Moore |first1=Walter J. |title=Physikalische Chemie |last2=Hummel |first2=Dieter O. |date=1983 |publisher=Walter de Gruyter |isbn=978-3-11-008554-9 |location=Berlin |page=604}}</ref>

In addition to the reaction conditions, the adsorption of nitrogen on the catalyst surface depends on the microscopic structure of the catalyst surface. Iron has different crystal surfaces, whose reactivity is very different. The Fe(111) and Fe(211) surfaces have by far the highest activity. The explanation for this is that only these surfaces have so-called C7 sites – these are iron atoms with seven closest neighbours.<ref name="Appl" />

The dissociative adsorption of nitrogen on the surface follows the following scheme, where S* symbolizes an iron atom on the surface of the catalyst:<ref name="max" />

: N<sub>2</sub> → S<sup>*</sup>–N<sub>2</sub> (γ-species) → S*–N<sub>2</sub>–S<sup>*</sup> (α-species) → 2 S*–N (β-species, ''surface nitride'')

The adsorption of nitrogen is similar to the chemisorption of carbon monoxide. On a Fe(111) surface, the adsorption of nitrogen first leads to an adsorbed γ-species with an adsorption energy of 24 kJmol<sup>−1</sup> and an N-N stretch vibration of 2100&nbsp;cm<sup>−1</sup>. Since the nitrogen is [[Isoelectronicity|isoelectronic]] to carbon monoxide, it adsorbs in an on-end configuration in which the molecule is bound perpendicular to the metal surface at one nitrogen atom.<ref name="Ertl1982adsorption" /><ref name="Ertl1982potassium">{{Cite journal |last1=Lee |first1=S. B. |last2=Weiss |first2=M. |year=1982 |title=Adsorption of nitrogen on potassium promoted Fe(111) and (100) surfaces |journal=Surface Science |language=en |volume=114 |issue=2–3 |pages=527–545 |bibcode=1982SurSc.114..527E |doi=10.1016/0039-6028(82)90703-8}}</ref><ref name="Appl" /> This has been confirmed by [[photoelectron spectroscopy]].<ref name="ErtlSolidSurfaces">{{Cite book |last=Ertl |first=Gerhard |url=https://archive.org/details/reactionsatsolid00ertl_180 |title=Reactions at Solid Surfaces |publisher=John Wiley & Sons |year=2010 |isbn=978-0-470-26101-9 |page=[https://archive.org/details/reactionsatsolid00ertl_180/page/n135 123] |language=en |url-access=limited}}</ref>

[[Ab initio quantum chemistry methods|Ab-initio-MO calculations]] have shown that, in addition to the [[Σ bond|σ binding]] of the free electron pair of nitrogen to the metal, there is a [[Π bond|π binding]] from the [[d orbitals]] of the metal to the π* orbitals of nitrogen, which strengthens the iron-nitrogen bond. The nitrogen in the α state is more strongly bound with 31 kJmol<sup>−1</sup>. The resulting N–N bond weakening could be experimentally confirmed by a reduction of the wave numbers of the N–N stretching oscillation to 1490&nbsp;cm<sup>−1</sup>.<ref name="Ertl1982potassium" />

Further heating of the Fe(111) area covered by α-N<sub>2</sub> leads to both [[desorption]] and the emergence of a new band at 450&nbsp;cm<sup>−1</sup>. This represents a metal-nitrogen oscillation, the β state. A comparison with vibration spectra of complex compounds allows the conclusion that the N<sub>2</sub> molecule is bound "side-on", with an N atom in contact with a C7 site. This structure is called "surface nitride". The surface nitride is very strongly bound to the surface.<ref name="ErtlSolidSurfaces" /> Hydrogen atoms (H<sub>ads</sub>), which are very mobile on the catalyst surface, quickly combine with it.

Infrared spectroscopically detected surface imides (NH<sub>ad</sub>), surface amides (NH<sub>2,ad</sub>) and surface ammoniacates (NH<sub>3,ad</sub>) are formed, the latter decay under NH<sub>3</sub> release ([[desorption]]).<ref name="Holleman" /> The individual molecules were identified or assigned by [[X-ray photoelectron spectroscopy]] (XPS), [[High resolution electron energy loss spectroscopy|high-resolution electron energy loss spectroscopy]] (HREELS) and [[Ir Spectroscopy]].

:[[File:KatNH3.svg|thumb|upright=1.2|Drawn reaction scheme]]

On the basis of these experimental findings, the [[reaction mechanism]] is believed to involve the following steps (see also figure):<ref>{{Cite web |last1=Wennerström |first1=Håkan |last2=Lidin |first2=Sven |title=Scientific Background on the Nobel Prize in Chemistry 2007 Chemical Processes on Solid Surfaces |url=https://www.nobelprize.org/uploads/2018/06/advanced-chemistryprize2007.pdf |access-date=17 September 2015 |publisher=Nobel Foundation}}</ref>
# N<sub>2</sub> (g) → N<sub>2</sub> (adsorbed)
# N<sub>2</sub> (adsorbed) → 2&nbsp;N (adsorbed)
# H<sub>2</sub> (g) → H<sub>2</sub> (adsorbed)
# H<sub>2</sub> (adsorbed) → 2&nbsp;H (adsorbed)
# N (adsorbed) + 3&nbsp;H (adsorbed) → NH<sub>3</sub> (adsorbed)
# NH<sub>3</sub> (adsorbed) → NH<sub>3</sub> (g)

Reaction 5 occurs in three steps, forming NH, NH<sub>2</sub>, and then NH<sub>3</sub>. Experimental evidence points to reaction 2 as being slow, [[rate-determining step]]. This is not unexpected, since that step breaks the nitrogen triple bond, the strongest of the bonds broken in the process.

As with all Haber–Bosch catalysts, nitrogen dissociation is the rate-determining step for ruthenium-activated carbon catalysts. The active center for ruthenium is a so-called B5 site, a 5-fold coordinated position on the Ru(0001) surface where two ruthenium atoms form a step edge with three ruthenium atoms on the Ru(0001) surface.<ref name="gavnholt">{{Cite journal |last1=Gavnholt |first1=Jeppe |last2=Schiøtz |first2=Jakob |year=2008 |title=Structure and reactivity of ruthenium nanoparticles |url=https://backend.orbit.dtu.dk/ws/files/4788727/Jeppe.pdf |journal=Physical Review B |volume=77 |issue=3 |pages=035404 |bibcode=2008PhRvB..77c5404G |doi=10.1103/PhysRevB.77.035404 |s2cid=49236953}}</ref> The number of B5 sites depends on the size and shape of the ruthenium particles, the ruthenium precursor and the amount of ruthenium used.<ref name="YouZhixiong" /> The reinforcing effect of the basic carrier used in the ruthenium catalyst is similar to the promoter effect of alkali metals used in the iron catalyst.<ref name="YouZhixiong" />

=== Energy diagram ===
[[File:Potential energy diagram for ammonia synthesis.svg|thumb|upright=1.7|[[Energy profile (chemistry)|Energy diagram]] ]]

An [[Energy profile (chemistry)|energy diagram]] can be created based on the [[Enthalpy of Reaction]] of the individual steps. The energy diagram can be used to compare homogeneous and heterogeneous reactions: Due to the high [[activation energy]] of the dissociation of nitrogen, the homogeneous gas phase reaction is not realizable. The catalyst avoids this problem as the energy gain resulting from the binding of nitrogen atoms to the catalyst surface overcompensates for the necessary dissociation energy so that the reaction is finally exothermic. Nevertheless, the dissociative adsorption of nitrogen remains the rate-determining step: not because of the activation energy, but mainly because of the unfavorable [[pre-exponential factor]] of the rate constant. Although [[hydrogenation]] is endothermic, this energy can easily be applied by the reaction temperature (about 700 K).<ref name="Appl" />
{{clear}}

== Economic and environmental aspects ==
{{Further|Ammonia production#Sustainable production}}
{{externalvideo|video1=[https://www.youtube.com/watch?v=U7l8imwtMkY How Earth's Population Exploded Bloomberg Quicktake]}}
[[File:Severnside fertilizer works - geograph.org.uk - 189990.jpg|thumbnail|upright=1.2|left|Severnside fertilizer plant northwest of [[Bristol]], UK]]
When first invented, the Haber process competed against another industrial process, the [[Frank–Caro process|cyanamide process]]. However, the cyanamide process consumed large amounts of electrical power and was more labor-intensive than the Haber process.<ref name="hager" />{{rp|137–143}}

As of 2018, the Haber process produces 230 million tonnes of anhydrous [[ammonia|ammonia per year]].<ref>{{Cite web |title=Ammonia annual production capacity globally 2030 |url=https://www.statista.com/statistics/1065865/ammonia-production-capacity-globally/ |access-date=7 May 2020 |website=Statista |language=en}}</ref> The ammonia is used mainly as a nitrogen [[fertilizers|fertilizer]] as ammonia itself, in the form of [[ammonium nitrate]], and as [[urea]]. The Haber process consumes 3–5% of the world's natural gas production (around 1–2% of the world's energy supply).<ref name=Smil_2004_Enriching/><ref>{{Cite web |title=International Energy Outlook 2007 |url=http://www.eia.doe.gov/oiaf/ieo/nat_gas.html |website=eia.gov |publisher=U.S. Energy Information Administration}}</ref><ref>Fertilizer statistics. {{Cite web |title=Raw material reserves |url=http://www.fertilizer.org/ifa/statistics/indicators/ind_reserves.asp |url-status=dead |archive-url=https://web.archive.org/web/20080424083111/http://www.fertilizer.org/ifa/statistics/indicators/ind_reserves.asp |archive-date=24 April 2008 |website=www.fertilizer.org |publisher=International Fertilizer Industry Association}}</ref><ref>{{Cite journal |last=Smith |first=Barry E. |date=September 2002 |title=Structure. Nitrogenase reveals its inner secrets |journal=[[Science (journal)|Science]] |volume=297 |issue=5587 |pages=1654–1655 |doi=10.1126/science.1076659 |pmid=12215632 |s2cid=82195088}}</ref> In combination with advances in breeding, herbicides, and pesticides, these fertilizers have helped to increase the productivity of agricultural land:
{{blockquote|With average crop yields remaining at the 1900 level the crop harvest in the year 2000 would have required nearly four times more land and the cultivated area would have claimed nearly half of all ice-free continents, rather than under 15% of the total land area that is required today.<ref name="Smil 2011">{{Cite journal |last=Smil |first=Vaclav |year=2011 |title=Nitrogen cycle and world food production |url=http://www.vaclavsmil.com/wp-content/uploads/docs/smil-article-worldagriculture.pdf |journal=World Agriculture |volume=2 |pages=9–13 |access-date=16 December 2013 |archive-date=21 June 2015 |archive-url=https://web.archive.org/web/20150621000149/http://www.vaclavsmil.com/wp-content/uploads/docs/smil-article-worldagriculture.pdf |url-status=dead }}</ref>|author=Vaclav Smil|title=Nitrogen cycle and world food production|source=Volume 2, pages 9–13}}

The energy-intensity of the process contributes to climate change and other environmental problems such as the leaching of nitrates into groundwater, rivers, ponds, and lakes; expanding dead zones in coastal ocean waters, resulting from recurrent eutrophication; atmospheric deposition of nitrates and ammonia affecting natural ecosystems; higher emissions of [[nitrous oxide]] (N<sub>2</sub>O), now the third most important greenhouse gas following CO<sub>2</sub> and CH<sub>4</sub>.<ref name="Smil 2011" /> The Haber–Bosch process is one of the largest contributors to a buildup of [[reactive nitrogen]] in the [[biosphere]], causing an anthropogenic disruption to the [[nitrogen cycle]].<ref>{{Cite journal |last1=Kanter |first1=David R. |last2=Bartolini |first2=Fabio |last3=Kugelberg |first3=Susanna |last4=Leip |first4=Adrian |last5=Oenema |first5=Oene |last6=Uwizeye |first6=Aimable |date=2 December 2019 |title=Nitrogen pollution policy beyond the farm |journal=Nature Food |language=en |volume=1 |pages=27–32 |doi=10.1038/s43016-019-0001-5 |issn=2662-1355 |doi-access=free}}</ref>

Since [[nitrogen use efficiency]] is typically less than 50%,<ref name="Oenema 2009">{{Cite journal |last1=Oenema |first1=O. |last2=Witzke |first2=H. P. |last3=Klimont |first3=Z. |last4=Lesschen |first4=J. P. |last5=Velthof |first5=G. L. |year=2009 |title=Integrated assessment of promising measures to decrease nitrogen losses in agriculture in EU-27 |journal=Agriculture, Ecosystems and Environment |volume=133 |issue=3–4 |pages=280–288 |doi=10.1016/j.agee.2009.04.025}}</ref> farm runoff from heavy use of fixed industrial nitrogen disrupts biological habitats.<ref name=Smil_2004_Enriching/><ref name="Howarth 2008">{{Cite journal |last=Howarth |first=R. W. |year=2008 |title=Coastal nitrogen pollution: a review of sources and trends globally and regionally |journal=Harmful Algae |volume=8 |issue=1 |pages=14–20 |doi=10.1016/j.hal.2008.08.015|bibcode=2008HAlga...8...14H }}</ref>

Nearly 50% of the nitrogen found in human tissues originated from the Haber–Bosch process.<ref>{{Cite journal |last=Ritter |first=Steven K. |date=18 August 2008 |title=The Haber–Bosch Reaction: An Early Chemical Impact On Sustainability |url=https://cen.acs.org/articles/86/i33/Haber-Bosch-Reaction-Early-Chemical.html |journal=Chemical & Engineering News |volume=86 |issue=33}}</ref> Thus, the Haber process serves as the "detonator of the [[Human overpopulation|population explosion]]", enabling the [[global population]] to increase from 1.6 billion in 1900 to 7.7 billion by November 2018.<ref name="Smil 1999">{{Cite journal |last=Smil |first=Vaclav |year=1999 |title=Detonator of the population explosion |url=http://www.vaclavsmil.com/wp-content/uploads/docs/smil-article-1999-nature7.pdf |journal=Nature |volume=400 |issue=6743 |page=415 |bibcode=1999Natur.400..415S |doi=10.1038/22672 |s2cid=4301828 |access-date=16 December 2013 |archive-date=22 January 2021 |archive-url=https://web.archive.org/web/20210122190517/http://vaclavsmil.com/wp-content/uploads/docs/smil-article-1999-nature7.pdf |url-status=dead }}</ref>

[[Regenerative fuel cell|Reverse fuel cell]]<ref>{{cite web | url=https://www.science.org/content/article/ammonia-renewable-fuel-made-sun-air-and-water-could-power-globe-without-carbon | title=Ammonia—a renewable fuel made from sun, air, and water—could power the globe without carbon }}</ref> technology converts electric energy, water and nitrogen into ammonia without a separate hydrogen electrolysis process.<ref>{{Cite web |last=Blain |first=Loz |date=2021-09-03 |title=Green ammonia: The rocky pathway to a new clean fuel |url=https://newatlas.com/energy/green-ammonia-primer-clean-fuel/ |access-date=2023-03-23 |website=New Atlas |language=en-US}}</ref>

The use of synthetic nitrogen fertilisers reduces the incentive for farmers to use more sustainable [[crop rotation]]s which include [[legume]]s for their natural nitrogen-fixing ability.

== See also ==
* {{annotated link|Birkeland–Eyde process}}
* {{annotated link|Calcium cyanamide}}
* {{annotated link|Chilean saltpeter}}
* {{annotated link|Guano}}
* {{annotated link|Hydrogen production}}
* {{annotated link|Industrial gas}}
* {{annotated link|Paradas method}}
* [[Crop rotation]]
* [[Legume]]

== References ==
{{reflist}}

==Sources==
* {{cite web |url=https://chemguide.co.uk/physical/equilibria/haber.html |title=The Haber Process |last=Clark |first=Jim |date= April 2013 |orig-year= 2002 |language= en |access-date= 15 December 2018 }}

== External links ==
* {{Cite journal |title=Detonator of the population explosion |url=https://www.nature.com/articles/22672.pdf?origin=ppub |journal=Nature | date=1999 |publisher=Macmillan Magazines Ltd| doi=10.1038/22672 | last1=Smil | first1=Vaclav | volume=400 | issue=6743 | page=415 | bibcode=1999Natur.400..415S }}, 29 July 1999.
* {{Cite web |title=Review of "Between Genius and Genocide: The Tragedy of Fritz Haber, Father of Chemical Warfare |url=http://www.fas.harvard.edu/~hsdept/bios/docs/shapin_LRBHaber.pdf |website=Daniel Charles}}
* {{Cite web |title=The Haber Process |url=http://www.chemguide.co.uk/physical/equilibria/haber.html |website=Chemguide.co.uk}}
* [https://archive.today/20140210085650/http://www.basf.com/group/corporate/en/news-and-media-relations/science-around-us/ammonia/story BASF – Fertilizer out of thin air]
* [https://www.britannica.com/nobelprize/article-9038696 Britannica guide to Nobel Prizes: Fritz Haber]
* [https://www.ias.ac.in/public/Volumes/reso/016/12/1159-1167.pdf Haber Process for Ammonia Synthesis]
* [http://www.idsia.ch/~juergen/haberbosch.html Haber–Bosch process], most important invention of the 20th century, according to V. Smil, [[Nature (journal)|Nature]], 29 July 1999, p.&nbsp;415 (by [[Jürgen Schmidhuber]])
* [http://nobelprize.org/nobel_prizes/chemistry/laureates/1918/haber-bio.html Nobel e-Museum – Biography of Fritz Haber]
* [http://www.ausetute.com.au/haberpro.html Uses and Production of Ammonia]
{{Authority control}}

<!--Categories-->
[[Category:BASF]]
[[Category:Chemical processes]]
[[Category:Industrial processes]]
[[Category:Equilibrium chemistry]]
[[Category:Peak oil]]
[[Category:Catalysis]]
[[Category:History of mining in Chile]]
[[Category:German inventions]]
[[Category:Industrial gases]]
[[Category:Name reactions]]
[[Category:Fritz Haber]]
[[Category:1909 in science]]
[[Category:1909 in Germany]]