View source for CoreXY

{{Short description|2-dimensional kinematic system}}
'''CoreXY''' is a technique used to move the printhead of a [[3D printer]] or the toolhead in [[CNC]] machines in the [[horizontal plane]]. The advantage of this technique is that the two motors used to perform the movement in the horizontal plane are stationary and do not have to move themselves, which can result in less moving [[mass]]. Instead, [[Belt (mechanical)|drive belts]] are used which are connected in an intricate way<ref>{{Cite web |author-last= Moyer |author-first= Ilan E. |title=Principle of Operation |date= 2012 |url=https://corexy.com/theory.html |access-date=2021-01-11}}</ref> to provide movement in a [[Cartesian coordinate system]]. Compared to conventional Cartesian 3D printers for [[Fused filament fabrication|fused filament]], it can provide increased [[3D printing speed|printing speed]] due to less moving mass.

== Movement ==
For movement along the ''x''-axis, both motors must rotate in the same direction. For movement along the ''y''-axis, the motors must rotate in opposite directions. If only one motor rotates, the movement will be diagonal.

The movement can be mathematically described as follows. If ''A'' is the movement of the first motor and ''B'' the movement of the second motor, the movement in the ''x'' and ''y'' directions is given by:

<math display=block>
\begin{align}
\Delta x &= \tfrac{1}{2}(\Delta A + \Delta B) \\[2px]
\Delta y &= \tfrac{1}{2}(\Delta A - \Delta B)
\end{align}
</math>

== Compared to conventional printers ==
Other Cartesian 3D printers which do not use the CoreXY technique most commonly also use two motors for the ''xy''-plane, but where one motor is independently responsible for movement along the ''x''-axis, and the other independently responsible for movement along the ''y''-axis. This is sometimes called a ''Cartesian technique''.<ref>{{Cite web |date=2022-03-27 |title=CoreXY vs Cartesian 3D Printers - Which is Best? |url=https://total3dprinting.org/corexy-vs-cartesian/ |access-date=2022-04-18 |website=Total 3D Printing |language=en-US}}</ref> "''Bed slinger''" is a cartesian variant where the build surface moves along the ''y''-axis, and the print head moves along the ''x''-axis, and this technique is used on amongst other the [[Prusa i3]] and clones.

== See also ==
* [[Delta robot]], a parallel robot mechanism used in delta 3D printers
* [[SCARA]], a robot arm-like mechanism used in 3D printers
* [[Voron 2.4]], a CoreXY printer with open source hardware and software

== References ==
{{reflist}}

[[Category:Mechanisms (engineering)]]
[[Category:3D printing]]