View source for Atomic mass

{{distinguish|standard atomic weight|mass number|relative atomic mass|atomic mass unit|atomic number}}
{{for|the musical group|Atomic Mass (band)}}
{{pp-move-indef}}
{{Short description|Rest mass of an atom in its ground state}}{{Infobox quantity
| name = Atomic mass
| othernames =
| width =
| background =
| image = Stylised Lithium Atom.svg
| caption = Stylized [[lithium]]-7 atom: 3 protons, 4 neutrons, and 3 electrons (total electrons are ~{{frac|1|4300}}th of the mass of the nucleus). It has a mass of 7.016&nbsp;Da. Rare lithium-6 (mass of 6.015&nbsp;Da) has only 3 neutrons, reducing the atomic weight (average) of lithium to 6.941.
| unit = [[kilogram]] (kg)
| otherunits = [[dalton (unit)|dalton]] (Da)
| symbols = ''m''<sub>a</sub>, ''m''
| baseunits =
| dimension =
| extensive = 
| intensive = yes
| conserved =
| transformsas = scalar
| derivations =
}}

'''Atomic mass''' (''m''<sub>a</sub> or ''m'') is the [[mass]] of a single [[atom]]. The atomic mass mostly comes from the combined mass of the [[Proton|protons]] and [[Neutron|neutrons]] in the nucleus, with minor contributions from the [[Electron|electrons]] and [[nuclear binding energy]].<ref>{{Cite web |title=DOE Explains...Nuclei |url=https://www.energy.gov/science/doe-explainsnuclei |access-date=2023-04-13 |website=Energy.gov |language=en}}</ref> The atomic mass of atoms, ions, or atomic nuclei is [[Nuclear_binding_energy#Mass defect|slightly less]] than the sum of the masses of their constituent protons, neutrons, and [[electron]]s, due to  (per {{math|''E'' {{=}} ''mc''<sup>2</sup>}}).

Atomic mass is often measured in [[Dalton (unit)|dalton (Da)]] or [[Unified atomic mass unit|unified atomic mass unit (u)]]. One dalton is equal to  {{frac|1|12}} the mass of a [[carbon-12]] atom in its natural state. Thus, the numeric value of the atomic mass when expressed in daltons has nearly the same value as the [[mass number]]. The value of 1 unified atomic mass unit in kilograms is <math>m_{\rm{u}} = 1.660539066 \times 10^{-27} \ \mathrm{kg}</math>.<ref>{{GoldBookRef|file=A00496|title=atomic mass}}</ref> 
Conversion between mass in kilograms and mass in daltons can be done using the atomic mass constant <math>m_{\rm{u}}= {{m({\rm{^{12}C}})} \over {12}} = 1\ \rm {Da}</math>.

The formula used for conversion is:<ref>{{cite book | author=<!--Staff writer(s); no by-line.--> | title = The International System of Units (SI). v1.06. | edition = 9 |url = https://www.bipm.org/en/publications/si-brochure/ |location=Paris | date = 2019 | publisher = Bureau International des Poids et Mesures | isbn = 978-92-822-2272-0 }}</ref><ref>{{cite web |author=Peter J. Mohr, Barry N. Taylor |date=May 20, 2019 |title=NIST Standard Reference Database 121. Fundamental Physical Constants. atomic mass constant |url=https://physics.nist.gov/cgi-bin/cuu/Value?u |archive-url=https://web.archive.org/web/20190322232304/https://physics.nist.gov/cgi-bin/cuu/Value?u |archive-date=2019-03-22 |access-date=December 10, 2019 |website=The NIST reference on constants, Units and Uncertainty. |publisher=National Institute of Standards and Technology}}</ref>
: <math>1\ {\rm{Da}}= m_{\rm{u}}={M_{\rm{u}} \over {N_{\rm A}}}={M(^{12}\mathrm{C}) \over {12\ N_{\rm A}}} = 1.660\ 539\ 068\ 92(52)\times 10^{-27}\ \mathrm{kg} ,</math>
where <math>M_{\rm u}</math> is the [[molar mass constant]], <math>N_{\rm A}</math> is the [[Avogadro constant]],<ref>{{Cite web|date=May 2019|title=Avogadro constant|url=https://physics.nist.gov/cgi-bin/cuu/Value?na#mid|url-status=live|access-date=24 June 2021|website=The NIST Reference on Constants, Units, and Uncertainty|archive-url=https://web.archive.org/web/20001025072028/http://physics.nist.gov:80/cgi-bin/cuu/Value?na |archive-date=2000-10-25 }}</ref> and <math>M(^{12}\mathrm{C})</math> is the experimentally determined [[molar mass]] of carbon-12.<ref>{{Cite web|date=May 2019|title=Molar mass of carbon-12|url=https://physics.nist.gov/cgi-bin/cuu/Value?mm12c#mid|url-status=live|access-date=24 June 2021|website=The NIST Reference on Constants, Units, and Uncertainty|archive-url=https://web.archive.org/web/20001206091500/http://physics.nist.gov:80/cgi-bin/cuu/Value?mm12c |archive-date=2000-12-06 }}</ref>

The '''relative isotopic mass''' (see section below) can be obtained by dividing the atomic mass ''m''<sub>a</sub> of an isotope by the atomic mass constant ''m''<sub>u</sub> yielding a [[dimensionless number|dimensionless value]]. Thus, the atomic mass of a carbon-12 atom is {{val|12|u=Da}} by definition, but the relative isotopic mass of a carbon-12 atom is simply 12. The sum of ''relative isotopic masses'' of all atoms in a molecule is the ''relative molecular'' ''mass.''

The atomic mass of an [[isotope]] and the ''relative isotopic mass'' refers to a certain specific [[isotope]] of an element. Because substances are usually not isotopically pure, it is convenient to use the ''elemental atomic mass'' which is the average ([[mean]]) atomic mass of an element, weighted by the abundance of the isotopes. The dimensionless [[standard atomic weight|(standard) atomic weight]] is the weighted [[mean]] relative isotopic mass of a (typical naturally occurring) mixture of isotopes.

The 2019 revision of the SI redefined the kilogram using the [[Planck constant]] ({{math|h}}), improving the precision of the atomic mass constant by anchoring it to fixed physical constants. Although the dalton remains defined via carbon-12, the revision enhances traceability and accuracy in atomic mass measurements.

== Relative isotopic mass == 
Relative ''isotopic'' mass (a property of a single atom) is not to be confused with the averaged quantity [[atomic weight]] (see above), that is an average of values for many atoms in a given sample of a chemical element.

While atomic mass is an absolute mass, relative isotopic mass is a dimensionless number with no units. This loss of units results from the use of a scaling ratio with respect to a carbon-12 standard, and the word "relative" in the term "relative isotopic mass" refers to this scaling ''relative'' to carbon-12.

The relative isotopic mass, then, is the mass of a given isotope (specifically, any single [[nuclide]]), when this value is scaled by the mass of [[carbon-12]], where the latter has to be determined experimentally. Equivalently, the relative isotopic mass of an isotope or nuclide is the mass of the isotope relative to 1/12 of the mass of a carbon-12 atom.

For example, the relative isotopic mass of a carbon-12 atom is exactly 12. For comparison, the atomic mass of a carbon-12 atom is exactly 12 [[dalton (unit)|dalton]]s. Alternately, the atomic mass of a carbon-12 atom may be expressed in any other mass units: for example, the atomic mass of a carbon-12 atom is {{val|1.99264688270e-26|(62)|u=kg}}.

As is the case for the related ''atomic mass'' when expressed in [[dalton (unit)|dalton]]s, the relative isotopic mass numbers of nuclides other than carbon-12 are not whole numbers, but are always close to whole numbers. This is discussed fully below.

== Similar terms for different quantities ==
The atomic mass or relative isotopic mass are sometimes confused, or incorrectly used, as synonyms of [[relative atomic mass]] (also known as atomic weight) or the [[standard atomic weight]] (a particular variety of atomic weight, in the sense that it is standardized). However, as noted in the introduction, atomic mass is an absolute mass while all other terms are dimensionless. Relative atomic mass and standard atomic weight represent terms for (abundance-weighted) averages of relative atomic masses in elemental samples, not for single nuclides. As such, relative atomic mass and standard atomic weight often differ numerically from the relative isotopic mass.

The atomic mass (relative isotopic mass) is defined as the mass of a single atom, which can only be one [[isotope]] (nuclide) at a time, and is not an abundance-weighted average, as in the case of relative atomic mass/atomic weight. The atomic mass or relative isotopic mass of each isotope and nuclide of a chemical element is, therefore, a number that can in principle be measured to high precision, since every specimen of such a nuclide is expected to be exactly identical to every other specimen, as all atoms of a given type in the same energy state, and every specimen of a particular nuclide, are expected to be exactly identical in mass to every other specimen of that nuclide. For example, every atom of oxygen-16 is expected to have exactly the same atomic mass (relative isotopic mass) as every other atom of oxygen-16.

In the case of many elements that have one naturally occurring isotope ([[mononuclidic element]]s) or one dominant isotope, the difference between the atomic mass of the most common isotope, and the (standard) relative atomic mass or (standard) atomic weight can be small or even nil, and does not affect most bulk calculations. However, such an error can exist and even be important when considering individual atoms for elements that are not mononuclidic.

For non-mononuclidic elements that have more than one common isotope, the numerical difference in relative atomic mass (atomic weight) from even the most common relative isotopic mass, can be half a mass unit or more (e.g. see the case of [[chlorine]] where atomic weight and standard atomic weight are about 35.45). The atomic mass (relative isotopic mass) of an uncommon isotope can differ from the relative atomic mass, atomic weight, or standard atomic weight, by several mass units.

Relative isotopic masses are always close to whole-number values, but never (except in the case of carbon-12) exactly a whole number, for two reasons:
* protons and neutrons have different masses,<ref>{{Cite web|date=May 2019|title=Proton mass in u|url=https://physics.nist.gov/cgi-bin/cuu/Value?mpu#mid|url-status=live|access-date=24 June 2021|website=The NIST Reference on Constants, Units, and Uncertainty|archive-url=https://web.archive.org/web/20001207100400/http://physics.nist.gov:80/cgi-bin/cuu/Value?mpu |archive-date=2000-12-07 }}</ref><ref>{{Cite web|date=May 2019|title=neutron mass in u|url=https://physics.nist.gov/cgi-bin/cuu/Value?mnu#mid|url-status=live|access-date=24 June 2021|website=The NIST Reference on Constants, Units, and Uncertainty|archive-url=https://web.archive.org/web/20001207023200/http://physics.nist.gov:80/cgi-bin/cuu/Value?mnu |archive-date=2000-12-07 }}</ref> and different nuclides have different ratios of protons and neutrons.
* atomic masses are reduced, to different extents, by their [[binding energy|binding energies]].

The ratio of atomic mass to [[mass number]] (number of nucleons) varies from {{val|0.9988381346|(51)}} for <sup>56</sup>Fe to {{val|1.007825031898|(14)|}} for <sup>1</sup>H.

Any [[mass defect]] due to [[nuclear binding energy]] is experimentally a small fraction (less than 1%) of the mass of an equal number of free nucleons. When compared to the average mass per nucleon in carbon-12, which is moderately strongly-bound compared with other atoms, the mass defect of binding for most atoms is an even smaller fraction of a dalton ([[unified atomic mass unit]], based on carbon-12). Since free protons and neutrons differ from each other in mass by a small fraction of a dalton ({{val|1.38844933e-3|(49)|u=Da}}),<ref>{{Cite web|date=May 2019|title=Neutron-proton mass difference in u|url=https://physics.nist.gov/cgi-bin/cuu/Value?mnmmpu#mid|url-status=live|access-date=24 June 2021|website=The NIST Reference on Constants, Units, and Uncertainty|archive-url=https://web.archive.org/web/20120905011653/http://physics.nist.gov/cgi-bin/cuu/Value?mnmmpu |archive-date=2012-09-05 }}</ref> rounding the relative isotopic mass, or the atomic mass of any given nuclide given in daltons to the nearest whole number, always gives the nucleon count, or mass number. Additionally, the neutron count ([[neutron number]]) may then be derived by subtracting the number of protons ([[atomic number]]) from the mass number (nucleon count).

== Mass defect ==
[[Image:Binding energy curve - common isotopes.svg|thumb|right|300 px|Binding energy per nucleon of common isotopes. A graph of the ratio of mass number to atomic mass would be similar.]]
The amount that the ratio of atomic masses to mass number deviates from 1 is as follows: the deviation starts positive at [[hydrogen]]-1, then decreases until it reaches a local minimum at helium-4. Isotopes of lithium, beryllium, and boron are less strongly bound than helium, as shown by their increasing mass-to-mass number ratios.

At carbon, the ratio of mass (in daltons) to mass number is defined as 1, and after carbon it becomes less than one until a minimum is reached at [[iron-56]] (with only slightly higher values for iron-58 and [[nickel-62]]), then increases to positive values in the heavy isotopes, with increasing atomic number. This corresponds to the fact that [[nuclear fission]] in an element heavier than [[zirconium]] produces energy, and fission in any element lighter than [[niobium]] requires energy. On the other hand, [[nuclear fusion]] of two atoms of an element lighter than [[scandium]] (except for helium) produces energy, whereas fusion in elements heavier than [[calcium]] requires energy. The fusion of two atoms of <sup>4</sup>He yielding [[beryllium-8]] would require energy, and the beryllium would quickly fall apart again. <sup>4</sup>He can fuse with [[tritium]] (<sup>3</sup>H) or with <sup>3</sup>He; these processes occurred during [[Big Bang nucleosynthesis]]. The formation of elements with more than seven nucleons requires the fusion of three atoms of <sup>4</sup>He in the [[triple-alpha process]], skipping over lithium, beryllium, and boron to produce carbon-12.

Here are some values of the ratio of atomic mass to mass number:<ref>{{Cite journal|last1=Wang|first1=Meng|last2=Huang|first2=W. J.|last3=Kondev|first3=F. G.|last4=Audi|first4=G.|last5=Naimi|first5=S.|date=March 2021|title=The AME 2020 atomic mass evaluation (II). Tables, graphs and references\ast|url=https://doi.org/10.1088/1674-1137/abddaf|journal=Chinese Physics C|language=en|volume=45|issue=3|pages=030003|doi=10.1088/1674-1137/abddaf|issn=1674-1137|hdl=11858/00-001M-0000-0010-23E8-5|s2cid=235282522|hdl-access=free}}</ref>
{| class="wikitable"
|-
! Nuclide !! Ratio of atomic mass to mass number
|-
|<sup>1</sup>H || {{val|1.007825031898|(14)}}
|-
|<sup>2</sup>H || {{val|1.0070508889220|(75)}}
|-
|<sup>3</sup>H || {{val|1.005349760440|(27)}}
|-
|<sup>3</sup>He || {{val|1.005343107322|(20)}}
|-
|<sup>4</sup>He || {{val|1.000650813533|(40)}}
|-
|<sup>6</sup>Li || {{val|1.00252048124|(26)}}
|-
|<sup>12</sup>C || 1
|-
|<sup>14</sup>N || {{val|1.000219571732|(17)}}
|-
|<sup>16</sup>O || {{val|0.999682163704|(20)}}
|-
|<sup>56</sup>Fe || {{val|0.9988381346|(51)}}
|-
|<sup>210</sup>Po || {{val|0.9999184461|(59)}}
|-
|<sup>232</sup>Th || {{val|1.0001640242|(66)}}
|-
|<sup>238</sup>U || {{val|1.0002133905|(67)}}
|}

== Measurement of atomic masses ==
Direct comparison and measurement of the masses of atoms is achieved with [[mass spectrometry]].

== Relationship between atomic and molecular masses ==
Similar definitions apply to [[molecule]]s. One can calculate the [[molecular mass]] of a compound by adding the atomic masses (not the standard atomic weights) of its constituent atoms. Conversely, the [[molar mass]] is usually computed from the [[standard atomic weight]]s (not the atomic or nuclide masses). Thus, molecular mass and molar mass differ slightly in numerical value and represent different concepts. Molecular mass is the mass of a molecule, which is the sum of its constituent atomic masses. Molar mass is an average of the masses of the constituent molecules in a chemically pure but isotopically heterogeneous ensemble. In both cases, the multiplicity of the atoms (the number of times it occurs) must be taken into account, usually by multiplication of each unique mass by its multiplicity.
{| class="wikitable plainrowheaders"
!colspan=4|Molar mass of CH<sub>4</sub>
|-
!  !! Standard atomic weight       !! Number !! Total molar mass (g/mol)<br>or molecular weight (unitless)
|-
| C || {{Atomic mass|C}} || 1      || {{Atomic mass|C}}
|-
| H || {{Atomic mass|H}} || 4      || {{Molecular mass|H|4}}
|-
| CH<sub>4</sub> ||      ||        || {{Molecular mass|C|1|H|4}} 
|-
!colspan=4|Molecular mass of <sup>12</sup>C<sup>1</sup>H<sub>4</sub>
|-
!  !! Nuclide mass (Da or u)      !! Number !! Total molecular mass (Da or u)
|-
| <sup>12</sup>C || 12.0000 || 1      || 12.0000
|-
| <sup>1</sup>H || 1.007825 || 4      || 4.0313
|-
| CH<sub>4</sub> ||      ||        || 16.0313 
|}

== History ==
{{main|History of chemistry|Unified atomic mass unit}}
The first scientists to determine relative atomic masses were [[John Dalton]] and [[Thomas Thomson (chemist)|Thomas Thomson]] between 1803 and 1805 and [[Jöns Jakob Berzelius]] between 1808 and 1826. Relative atomic mass (''Atomic weight'') was originally defined relative to that of the lightest element, hydrogen, which was taken as 1.00, and in the 1820s, [[Prout's hypothesis]] stated that atomic masses of all elements would prove to be exact multiples of that of hydrogen. Berzelius, however, soon proved that this was not even approximately true, and for some elements, such as chlorine, relative atomic mass, at about 35.5, falls almost exactly halfway between two integral multiples of that of hydrogen. Still later, this was shown to be largely due to a mix of isotopes, and that the atomic masses of pure isotopes, or [[nuclide]]s, are multiples of the hydrogen mass, to within about 1%.

In the 1860s, [[Stanislao Cannizzaro]] refined relative atomic masses by applying [[Avogadro's law]] (notably at the [[Karlsruhe Congress]] of 1860). He formulated a law to determine relative atomic masses of elements: ''the different quantities of the same element contained in different molecules are all whole multiples of the atomic weight'' and determined relative atomic masses and molecular masses by comparing the [[vapor density]] of a collection of gases with molecules containing one or more of the chemical element in question.<ref>{{cite journal | doi = 10.1021/ed084p1779 | title = Origin of the Formulas of Dihydrogen and Other Simple Molecules | first = Andrew | last = Williams | volume = 84 | year = 2007 | issue = 11 | journal = [[Journal of Chemical Education|J. Chem. Educ.]] | pages = 1779|bibcode = 2007JChEd..84.1779W }}</ref>

In the 20th century, until the 1960s, chemists and physicists used two different atomic-mass scales. The chemists used an "atomic mass unit" (amu) scale such that the natural mixture of [[oxygen]] isotopes had an atomic mass 16, while the physicists assigned the same number 16 to only the atomic mass of the most common oxygen isotope (<sup>16</sup>O, containing eight protons and eight neutrons). However, because [[oxygen-17]] and [[oxygen-18]] are also present in natural oxygen this led to two different tables of atomic mass. The unified scale based on carbon-12, <sup>12</sup>C, met the physicists' need to base the scale on a pure isotope, while being numerically close to the chemists' scale. This was adopted as the 'unified atomic mass unit'. The current International System of Units (SI) primary recommendation for the name of this unit is the [[dalton (unit)|dalton]] and symbol 'Da'. The name 'unified atomic mass unit' and symbol 'u' are recognized names and symbols for the same unit.<ref name=bipm9th>Bureau International des Poids et Mesures (2019): ''[https://www.bipm.org/utils/common/pdf/si-brochure/SI-Brochure-9-EN.pdf The International System of Units (SI)]'', 9th edition, English version, page 134. Available at the [https://www.bipm.org/en/publications/si-brochure/ BIPM website].</ref>

The term ''atomic weight'' is being phased out slowly and being replaced by ''relative atomic mass'', in most current usage. This shift in nomenclature reaches back to the 1960s and has been the source of much debate in the scientific community, which was triggered by the adoption of the [[unified atomic mass unit]] and the realization that weight was in some ways an inappropriate term. The argument for keeping the term "atomic weight" was primarily that it was a well understood term to those in the field, that the term "atomic mass" was already in use (as it is currently defined) and that the term "relative atomic mass" might be easily confused with ''relative isotopic mass'' (the mass of a single atom of a given nuclide, expressed dimensionlessly relative to 1/12 of the mass of carbon-12; see section above).

In 1979, as a compromise, the term "relative atomic mass" was introduced as a secondary synonym for atomic weight. Twenty years later the primacy of these synonyms was reversed, and the term "relative atomic mass" is now the preferred term.

However, the term "''standard'' atomic weights" (referring to the standardized expectation atomic weights of differing samples) has not been changed,<ref>{{cite journal|url=http://www.iupac.org/publications/pac/1992/pdf/6410x1535.pdf |title='Atomic weight': The name, its history, definition, and units|journal=Pure Appl. Chem.|volume= 64|pages= 1535|year= 1992|doi=10.1351/pac199264101535|last1=De Bievre|first1=P.|last2=Peiser|first2=H. S.|issue=10|s2cid=96317287}}</ref> because simple replacement of "atomic weight" with "relative atomic mass" would have resulted in the term "standard relative atomic mass."

== See also ==
* [[Atomic number]]
* [[Dalton (unit)]]
* [[Isotope]]
* [[Isotope geochemistry]]
* [[Molecular mass]]
* [[Jean Stas]]

== References ==
{{Reflist}}

== External links ==
* [http://physics.nist.gov/cgi-bin/Compositions/stand_alone.pl?ele=&ascii=html&isotype=some NIST relative atomic masses of all isotopes and the standard atomic weights of the elements]
* [http://www.nndc.bnl.gov/masses/ AME2003 Atomic Mass Evaluation] {{Webarchive|url=https://web.archive.org/web/20190111232533/http://www.nndc.bnl.gov/masses/ |date=2019-01-11 }} from the [[National Nuclear Data Center]]
{{Mole concepts}}
{{Authority control}}

{{DEFAULTSORT:Atomic Mass}}
[[Category:Atoms]]
[[Category:Mass]]
[[Category:Chemical properties]]
[[Category:Stoichiometry]]